Latest grit chamber Tenders | Government grit chamber Tenders

CTN :41037854

22 Jul, 2025 9.00 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in alapur to pasopur & l021 to pakthaul , ( khijir chak abm kirtoul ke bich balan nadi par pul ) under teghra block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, b) routine load test @ 1.5 times load on 2% pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space b

State Government

CTN :41064908

30 Jul, 2025 14.99 Lacs

Raipur - Chhattisgarh

Tender For various repairing for road devider , railing ,r.c.c. drain, paved shoulder etc. at various roads under p.w.d. sub division no.-1, raipur (c.g.)

CTN :41067619

31 Jul, 2025 41.47 Lacs

Barpeta - Assam

Tender For stbr/ridf-xxxi/barpeta-02/03 construction of rcc bridge railing on br. no 1/1 central school to azad nagar road under mukhya mantrir unnata paki path nirman achani (mmuppna) under ridf-xxxi of nabard for the year 2025-26 (balance work)

State Government

CTN :40993743

18 Jul, 2025 NA

Shillong - Meghalaya

Tender For construction of rcc railing, providing tiles on footpath from khadc towards kyrbom upto mawprem presbyterian church

State Government

CTN :40969996

25 Jul, 2025 16.60 Crore

Delhi - Delhi

Tender For providing and fixing fencing/railing with rcc post/strut, concertina coil, ms grill at periphery and remaining vacant land of eastern and western bank of yamuna river from nh-24 to okhla barrage.

State Government

CTN :40985791

21 Jul, 2025 8.99 Lacs

Ropar - Punjab

Tender For repair of rob and reconstruction of the damaged rcc railing on rob at kurali city on chandigarh ropar road nh-205/now odr under head 3054 sh

CTN :40982483

16 Jul, 2025 30.31 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For 1. sehkari ganna vikas samiti ltd ramraj mai rcc road ms railing aur site development ka karya.

State Government

CTN :40944900

18 Jul, 2025 NA

Shillong - Meghalaya

Tender For construction of rcc railing, providing tiles on footpatb from khadc towards kyrbom upto mawprem presbyterian churcb

CTN :40886493

19 Jul, 2025 30.00 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of rcc column size 300x300x100mm 4nos 16 oblique 12mm ms iron tmt isi m20 grade concrete , tie beam of dimention 200x200mm with 16 oblique 12mm ms iron tmt , total column height 12 point 5mm from ground , ms chequered platform at height of 05 mtr , ms chequered platform at height of 10 mtr , launching platform at 10 mtr , ms ladder slope type with railing , loading area with brick work and loose sand filling , mattress for safety with cover , slithering rope 10mm dynamic climbing , slithering gloves , seat harness full size , carabiners , helmet

CTN :40855605

17 Jul, 2025 NA

Patiala - Punjab

Tender For cleaning and disposal of waste in collection chamber size 4m dia and 4.5m total depth , cleaning and disposal of waste in inlet chamber 1mx0.75mx1 m , cleaning and disposal of waste in fine screen 1x0.3x1m , cleaning and disposal of waste in coarse screen , cleaning and disposal of waste in grit chamber 2x0.3x1 m , cleaning and disposal of waste in splitter boxes 1x0.3x1 m , cleaning and disposal of waste in tr.filters 3x3x1.9m , cleaning and disposal of waste in secoundary settling tank 2.4x2.4x1.7 hopper height m , cleaning and disposal of waste in sludge chamber 1x1x1.5 , cleaning and disposal of waste in sludge drying bed 8.1x2x1 m , cleaning and disposal of waste inuasb reactors 3.2x6.2x5 m , cleaning and disposal of waste in dosing siphons 1.5x1.5x1.5 m , repairing and overhauling of raw sewage pumps submersible 3 phase 415 v , repairing and overhauling of sludge pump non clog 3 phase 415 v , repairing and overhauling of recirculation pumps centrifugal ,3 phase , repairing and overhauling of air blowers twin lobe 3 phase,500 cfm , repairing and overhauling of mixing motors gear driven 415 v ip 55 , repairing and replacing of mdb parts incoming circuit breaker busbars mcb mccb isolator elcb spd indicators control switches and push buttenswiring and terminals , bleaching powder

Grit Chamber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government