Latest grp liner Tenders | Government grp liner Tenders

Central Government/Public Sector

CTN :41026166

21 Jul, 2025 NA

Vellore - Tamil Nadu

Tender For supply of schedule 1 - supply, erection & commissioning of frp pipes & fittings , schedule 2 - supply, erection & commissioning of frp pipes & fittings , schedule 3 - supply, erection & commissioning of frp pipes & fittings , schedule 4 - supply, erection & commissioning of frp pipes & fittings

Central Government And Public Sector

CTN :40780402

16 Jul, 2025 58.96 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of spare components and replacement of damaged components in induced draft pultruded frp counter flow cooling tower at heavy water plant (kota) site. - supply of pvc film fill block of size 6 x2 x2 ., supply of square channels of pultruded frp material of size (width/height x thickness x length): 4 inch x 1/4 inch x 24 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 4 inch x 1-1/8 inch x 1/4 inch x 18 feet., supply of c-channels of pultruded frp material of size (width x height x thickness x length): 6 inch x 1-5/8 inch x 1/4 inch x 18 feet., supply of complete partition sheets (frp sheets) of adjacent cells and replacement of existing partition sheets. sheet thickness: 3 mm. fasteners for installation of sheet shall be arranged by contractor., supply of hex head gi bolts with hex nut. size: m12 x 130 mm long., supply of self threading screws having hex head. size: dia 5 mm x 60 mm long., replacement of old neoprene rubber seal/grommet for distribution pipe with new seal/grommet (spare neoprene rubber seal/grommet shall be provided by dept.)., replacement of damaged water distribution nozzles with new nozzles (fasteners and gasket shall also be replaced) (spare nozzles along with fasteners and gasket shall be provided by dept.)., replacement of damaged pvc film fill blocks of size 6 x2 x2 with new fills blocks (for 410 nos. fills, spare pvc film fill sheets shall be provided by dept., contractor shall prepare fill blocks by corrugating, arranging adhesive, application of adhesive and assembly). scrap fills shall be shredded into pieces, packed in bags and shifted to designated place., replacement of damaged pvc drift eliminators with new pvc drift eliminators. (spare c type drift eliminators along with spacers shall be provided by dept., contractor shall assemble the drift eliminators)., removal, cleaning/de-choking and re-installation of water distribution nozzles., repair of leaky joints of outer frp sheets of cells by aligning sheets, jointing with fasteners and providing frp lining on joints from inside/outside. frp lining shall be of four chopped mat and two surface mats laminated with resin for 4 mm thickness., internal structural maintenance of main header, branch pipes, fill supports, main structural members of ct cells etc by replacing/providing square channels/c-channels etc supplied at sr. no. 2, 3 & 4 above.

CTN :40949790

11 Jul, 2025 2.43 Lacs

Delhi - Delhi

Tender For providing childrens playground equipment (jhula) in west campus near kendriya bhandar park of iit delhi. - childrens playground equipment, supply and installation of childrens playground equipment supply, delivery, and installation of a factory-fabricated suitable for children, constructed from high-quality powder-coated galvanized steel and weather-resistant hdpe or plastic seats and handles. the equipment shall consist with anti-slip grips and ergonomic support, mounted on a central pivot frame with heavy-duty bearings to ensure smooth and safe operation. all materials used shall be uv-stabilized, rust-resistant, and conform to playground safety standards. the equipment shall be securely anchored into a concrete foundation as per the manufacturer s specifications, complete in all respects including excavation, foundation, backfilling, and finishing to the required level.(the equipment must accompanied with test reports for quality, safety, durblity, and proper functioning of equipment), 1) providing and fixing deluxe 2 see saw as per specifications, 1.1) deluxe 2 see saw:- product area: minimum 2500 mm x 350 mm. safe play area: minimum 4500 mm x 1500 mm. see saw lever is made up of minimum 100 nb gi b- class pipes. lever length willbe minimum 2500 mm long. lever ends are coveredwith gi pipe end cap. two nos. of seats are made up of lldpe plastic with inbuilt handle. stand is made up of minimum 80 nb gi b-class pipes. two no of pedestal bearing are given for smooth and noiseless movement of see saw lever. bearing is covered with nylon cover, 2) providing and fixing of deluxe slide as per specifications, 2.1) deluxe slide ae301 structure made of 35mm x 4mm angle iron frame slide: g.i. sheet slide length: 6ft, 3) providing and fixing of kids merry go round as per specifications, 3.1) frp platform merry go round:- product area: minimum 1500 mm diameter. safe play area: minimum 3000 mm diameter. the platform of merry go round made up offibre reinforced plastic. the ring on which the frp platform is based. barcode on machine to show the proper use of machine., 4) providing and fixing of horse rider as per specifications, 4.1) horse rider product area: minimum 900 x 350 mm. safe area: minimum 2700 mm x 950 mm. spring assembly is made up of square plates & compression spring. compression spring is made up of minimum 18 dia wire, spring dia is minimum 200 mm and height is min 300 mm (+10%). stand is made up of minimum 40 nb b class g.i isi mark pipes of reputed make (jindal/bhushan/tata) plate is welded on it to fix plastic bike on it firmly. all welded joints are properly groundedand coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat done by first coat of superior brand primer 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character is made up of lldpe plastic with rotational moulding process which is nonageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is minimum 850 mm long and weight is minimum 7 kgs. it has inbuilt handle and foot rest., 5) providing and fixing of triple swing side as per specifications, 5.1) triple swing, side pipe - 35 mm upper pipe - 50 mm seat - rubber sheet chain - 3 mm.

corporations/Associations/Others

CTN :40848245

14 Jul, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for

State Government

CTN :40898033

22 Jul, 2025 NA

Udyogamandal - Kerala

Tender For supply of frp pipes and fittings (rate contract)

CTN :40886469

19 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores and construction material of wss 12kl storage tank - cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse , hard core of broken stone aggregate of size 45 to 63 mm , crushed stone aggregate 20 mm graded , pre cast acc blocks type c1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 mtr , 5mm thick ms sheet , angle iron 65 x 65 x 6 mm , frp tanks 2 x 6000 ltrs capacity for each asset rotational moulded frp underground water storage tank , columns square hollow steel shs sections of size 80mm x 80mm x 4mm and 2800 mm long , trusses including gable end trusses shall be provided using rectangular hollow sections rhs of size 50mm x 25mm x 4mm and 2400mm long , purlins rectangular hollow steel rhs section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses , side bracings 03 nos of side bracing shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 3400 mm long as a horizontal support , roof sheet 0 point 60 mm thick pre painted galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed , ms sheet of 5 mm thick to cover surface of tank and making 1m x 1m opening cover of ug frp water tank , angle iron of size 65 x 65 x 6mm for making a frame for fixing of ms cover on the ug tank and opening of ug frp water tank and horizontal beam support to ms plate , ms handle of size 450 long and 50 mm thick 4 nos per cover welded with the ms sheet for opening of tank cover , ms hinges should be provided and fixed with ms sheet and angle iron frame , mlc pipe multi layer composite pipes triple layer pe al pe shall have an inner dia 25 to 32 mm in 100m roll with equal union , supply of hdpe water tank 500 ltr triple layer , self tapping screw 4 inch , self tapping screw 3 inch , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , water level pipe 4mm and 15 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel cutter circular saw , cutting blade 4 feet steel , cutting blade 14 feet steel , hexa blade 350 mm long isi 1st quality , axes picks 03 kg head with handle , welding rod , welding goggles , welding gloves

Grp Liner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

State Government