Latest guide roller Tenders | Government guide roller Tenders

CTN :42605063

25 Nov, 2025 NA

Rangat - Andaman And Nicobar Islands

Tender For supply of materials for various gram panchayats worksite of mgnrega at rangat block - cement, crusher dust, pulvarized sand, stone aggregate, stone aggregate, stone aggregate, stone aggregate, stone aggregate, stone aggregate, moorum, boulder, cement concrete hollow block, cement concrete hollow block, g.i wire, tmt steel bars, binding wire, wire nails, ply wood, g.i corrugated sheet 8 feet, pvc pipe, pvc bend, pvc tee, pvc clamp, pvc solvent, pvc pipe, pvc bend, pvc tee, pvc clamp, level tube, g.i. wire mesh of mesh size 50x50mm, pre cast rcc hume pipe (inner dia-1.00m, length 1.20m,thickness-10 mm .main bars -10 dia stirups -8 dia @100mmc/c spacing rcc mix-1:1,5:3, pre cast rcc hume pipe (inner dia- 1.50m, length 1.m, thickness-10cm .main bars -10 dia stirups -8 mm dia @100mmc/c spacing rcc mix-1:1,5:3, pre cast rcc hume pipe (inner dia-0.50m, length 1.m,thickness-10cm main bars -10 mm dia stirups -8 mm dia @100mmc/c spacing rcc mix-1:2:4, r.c.c fencing post alongwith m.s. hook(top width-12cm, bottom width-15cm, height-1.8 m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3 with hookes@15cm c/c spacing., pre cast r.c.c. ring (inner dia-1.00m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, pre cast r.c.c. ring (inner dia-1.50m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, first aid box, hose pipe, white cement, hire charges of pumpset for dewatering(including diesel), higher charges of road roller, higher charges of pickup van, citizen information board (make mettalic (gi sheet,ms pipe &ms angle with concrete base of mix 1:2:4) shape- rectangular with top edge of the board pointed upward with sides inclined at 20 degrees with horizontal size :-individual work 2ft widthx3 ft height layout:- background yellow , border of the board and text in black colour, citizen information board (make mettalic (gi sheet,ms pipe &ms angle with concrete base of mix 1:2:4) shape- rectangular with top edge of the board pointed upward with sides inclined at 20 degrees with horizontal size :-community work 3ftwidthx4ft height layout:- background yellow , border of the board and text in blue colour, ms pipe, skilled labour, semi skilled labour, ms flat, welding charge, plastic net for plant protection, shuttering, higher charges concrete mixer machine, poly propylene wire mesh, plastic rope (for fencing)

CTN :42620789

26 Nov, 2025 NA

Dibrugarh - Assam

Tender For construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever required, vibrati

State Government

CTN :41453245

18 Nov, 2025 50.0 Thousand

Multi City - Telangana

Tender For corrigendum : guide rollers as per drawing

Central Government And Public Sector

CTN :42443913

17 Nov, 2025 NA

Angul - Odisha

Tender For corrigendum : tender for supply of mekaster lift - guide roller for crusher house lift , counter roller for crusher house lift , pinion module 5 for crusher house lift , cable trolley guide roller for ch lift , cage collapsable door lhs for ch lift

corporations/Associations/Others

CTN :40855960

12 Nov, 2025 NA

Barsingsar - Rajasthan

Tender For bid to ras supply of st030210235 - fixed return idler size dia 127 x 1150 mm long , st030210236 - fixed return idler size dia 127 x 1400 mm long , st030210237 - garland return idler size dia 127 x 600 mm long , st030210238 - garland return idler size dia 127 x 700 mm long , st030210239 - garland carrying idler size dia 139.7 x 380 mm long , st030210240 - garland carrying idler size dia 139.7 x 465 mm long , st030210241 - garland impact idler size dia 159 x 380 mm long , st030210242 - garland impact idler size dia 159 x 465 mm long , st030210243 - fixed return idler size dia 127 x 700 mm long , st030210244 - fixed return idler size dia 127 x 550 mm long , st030190616 - fixed type imapct idler dia 159 x 500 mm long for 1000 mm wide conveyor belt , st030190586 - guide roller assembly size- 63 mm dia x 100 mm long , st030190587 - guide roller assembly size- 80 mm dia x 110 mm long , st030210245 - fixed type carrying idler size dia 139.7 x 465 mm long , st030210246 - fixed type carrying roller tube dia 139.7 x 380 mm long , st030210247 - fixed type impact idler of tube dia 159 x 380 mm long , st030210248 - fixed type impact idler of tube dia 159 x 465 mm long , st030210248 - fixed type return roller of dia 127 x 600 mm long