Latest guide vane Tenders | Government guide vane Tenders

State Government

CTN :41051675

26 Jul, 2025 82.94 Lacs

Raichur - Karnataka

Tender For engineering, supply, erection, commissioning, testing & calibration of electrical actuator for unit 5 fd fan guide vane operation.

State Government

CTN :41029056

16 Jul, 2025 4.88 Lacs

Kinnaur - Himachal Pradesh

Tender For providing and fixing guide vane locking assembly for horizontal francis turbine of ganvi power house stage

State Government

CTN :41050267

20 Jul, 2025 26.93 Lacs

Multi City - Karnataka

Tender For reconditioning of cavitation portion of tgb cone (dt side),inner surface of steel house and replacing of cup seal plates and seals of all the runner blades and guide vane of generating unit-1 in linganamakki dam power house

Central Government/Public Sector

CTN :40717404

16 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of guide vane position feedback device magnetostrictive type stroke 800 mm , runner position feedback device magnetostrictive type stroke 450 mm , guide vane position feedback device magnetostrictive type stroke 600mm , guide vane position feedback device magnetostrictive type stroke 250mm

Central Government And Public Sector

CTN :40970006

26 Jul, 2025 49.53 Lacs

Pithoragarh - Uttarakhand

Tender For repair and hp-hvof coating of 02 sets of guide vanes (one set comprising 20 nos. guide vanes) of dhauliganga power station (2025-26).

CTN :40410492

16 Jul, 2025 1.80 Crore

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares of pa, fd and id fans for boiler, 2x600 mw katpp, rvunl, jhalawar - pa fan spares for assembly main bearing (gu23834-22) main drawing no. u236d00(dy), clip ring, bush, distance ring(u138d07), pressure piece 8x10, ring, distance ring(u138d17), oil collecting, cylindrical helical spring 2x10x18, circlip for hole 70, o-ring 140x5.5, angle ring, sealing ring, main bearing shaft, oil drain socket, shaft nut m135x2, shaft nut m180x3, core shaft, laminated seal pack 201x9x6, pa fan spare for impellers (gu23834-22) main drawing no.- u236y200 (dy),fd fan spares assembly impellers (gu15036-02) main drawing no.-u142y00 (g), adjusting ring, complex bush iii, complex bush i, complex bush ii, gasket, bearing bush, pressing ring, nut, plate spring, bush, axial grooved ball bearing, circlip for hole 55, o-ring 49.5x3, o-ring 44.2x2.5, o-ring 60x3, circlip for hole 98x3, o-ring 90x3, grooved ball bearing 112, blade shaft, lever (crank set), sealing ring, o-ring 85x5, pa fans assembly blade actuating section (gu23834-22) &main drawing no.u238/2100(dy), servo motor control valve unit, fork lever, joint, servo motor link, bearing housing 208, id fan rotor part(ya17036-8z) main drawing no.a170d00asmzy, decentered guide vane bearing support unit

Central Government/Public Sector

CTN :40729064

16 Jul, 2025 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of polishing of 07 lines components with hal material - 6th crb(hpc) , 7th crb(hpc) , 8th crb(hpc) , 9th crb(hpc) , 1st stage lpc guide vane , 2nd stage lpc guide vane , guide vane 3rd stage

Central Government/Public Sector

CTN :40868905

18 Jul, 2025 NA

Gayzing - Sikkim

Tender For supply of guide vane servo motor lh as per drg no 02030210601 , guide vane servo motor rh as per drg no 02030310601

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

Central Government/Public Sector

CTN :40855512

17 Jul, 2025 85.34 Lacs

Korba - Chhattisgarh

Tender For supply of spares for kirloskar make pumps of various models - casing wearing ring - suc, moc - bronze, part no. - 6up4br190 , impeller, moc - bronze, part no. - 6up4br159, 15900110 , shaft cw - ccw, moc - c- 40, part no. - 6up4c40180 , bearing housing unit, moc - std, part no. - 6up4stdsubbhu6up4, subbhu6up4 , casing wearing ring - del, moc - bronze, part no. - 6up4br1901, 1901 , rotating assembly - oil lubricated, moc - 11 moc, part no. - sct20058211mocsubrua2 , bearing housing unit - oil lubricated, moc - std, part no. - sct200582stdsubbhuolsct582, subbhuolsct582 , pump shaft- 7 stage, moc - aisi-316, part no. - rkb20037k7aisi316180, 7stg180 , pump shaft- 6 stage, moc - c-40, part no. - rkb20037k6c40180, 180 , stage casing - tapped, moc - ci, part no. - rkb20037ktpci124 , diffuser with guide vanes, moc - ci, part no. - rkb20037kci129, 129 , enclosed impeller, moc - ci, part no. - rkb20037kci151, 151ci , wear ring delivery side, moc - ci, part no. - rkb20037kci191, 191ci , wear ring suction side, moc - ci, part no. - rkb20037kci190 , shaft sleeve - suc.side, moc - aisi-410, part no. - rkb20037kaisi410310, 310 , shaft sleeve - del.side, moc - aisi-410, part no. - rkb20037kaisi410311, 311 , inter stage bush for dwgv., moc - ci, part no. - rkb20037kci355, 355ci , inter stage bush for diff., moc - ci, part no. - rkb20037kci358, 358ci , liquid deflector, moc - ci, part no. - rkb20037kci236 , gland, moc - bronze, part no. - rkb20037kbr223, 223 , compression spring, moc - steel, part no. - rkb20037kst483, 483 , bearing housing unit, moc - std, part no. - rkb20037kstdsubbhu37k, subbhu37k , set of keys - 6 stage, moc - c-40, part no. - rkb20037k6c40ssok1 , oil seal d.e. and n.d.e., moc - rubber, part no. - rkb20037krubber500, 500 , delivery casing, moc - ci, part no. - rkb20037kci111, rkb20037k111 , suction casing, moc - ci, part no. - rkb20037kci113, 113

Guide Vane Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors