Latest gunmetal Tenders | Government gunmetal Tenders

State Government

CTN :43061811

23 Dec, 2025 NA

Champa - Chhattisgarh

Tender For quotation for sanitation materials and equipment (related to mcc) ,water supply and pump repair work ,electrical equipment and electrical related repair work. ,stationery material supply work. ,flex, banner, printing (rate per sq. ft.). ,rental of tents and sound systems ,wall painting, wall writing (per sq. ft.) including necessary materials. ,repair work of the body's tractor, trolley, tricycle rickshaw and other vehicles.- gi pipe b class , gi socket , gi reducer/socket , gi nipple , motor reducer , gunmetal valve (gate valve) , ci non return valve , ci non return valve , c.i.flange , ci flag , ci flag , c.i.flag , ci flag , c.i. plug , c.i.plug , c.i. plug , c.i. plug , noiser (flange) , flange , noiser (flag) , justice (flange) , c.i. saddlepiece , c.i. saddlepiece , c.i. saddlepiece , c.i. saddlepiece , c.i. saddlepiece , c.i. saddlepiece , c.i. saddlepiece , farul , tap , tap , raw rubber , rubber seat , whiteness , jute , ac pressure pipe , ac pressure pipe , ac pressure pipe , cid joint , cid joint , cid joint , rubber ring , rubber ring , rubber ring , pvc pipe 4 kg pressure , hand pump complete (body set) , pedestrian body , water chamber , upper head (only) , handle , axle , bearing 6204 , peace , hand pump rod , rod socket , upper valve , lower valve , bracket visor leather , bracket viser rubber , guide valve , rubber visor sealing , guide lining , head cover plate , c.i. naslender , nut bolt (hand pump) , submersible pump set 3 hp 7 stage , panel board 6 hp to 10 hp motor , single fence panel board , - main switch 32 ampere , main switch 63 ampere , auto switch , ampere meter , volt meter , kpcitter , panel fitting wire 7/20 , transformer island , nut bolt

CTN :43017241

03 Jan, 2026 18.00 Lacs

Balaghat - Madhya Pradesh

Tender For gunmetal statue supply work of honorable atal bihari vajpayee ji

State Government

CTN :43013204

15 Dec, 2025 NA

Multi City - Andhra Pradesh

Tender For repair and reconditioning of broken shaft and gunmetal/bronze impeller of 22 hp vt pump at dam power house

State Government

CTN :42914992

19 Dec, 2025 28.64 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares for aph (model 27.5vitm 2000 72 degree pa) of 2x250mw unit no.10 and 11 of stps sarni. - spares for air preheater ( model 27.5 vitm 2000 720 pa ) of 2x250mw units., inboard & outboard static seals for hot end sector plates; (one set = requirement for 1 aph),, inboard & outboard static seals for cold end sector plates; (one set = requirement for 1 aph),, cold end grating (one set = requirement for 1 aph),, t-bar including t - bar pin, t- bar tab and t- bar clip for hot end, taper lock bush of o/p shaft of main drive gear box, kao wool packing, packing rope for air sealing cover assembly (guide bearing), packing rope for air sealing cover assembly (support bearing), 50 mm gun metal valve thread connection for los working pressure 5 kg/cm2, 25 mm gun metal valve thread connection for los working pressure 5 kg/cm2, rotor angle he (one set = requirement for 1 aph),, soot blower pipe along with nozzle assembly, filter for air motor 1" bsp, relief valve(die casting)22 mm for lube oil system, working pressure 5 ksc, one end is56mm & other end is 46 mm, make-corona or equivalent., lubricator for air motor 1" bsp, wash pipe assembly for hot end & cold end with ss nozzle(one set consist of 02 nos. ), steel wire rope preform, ungalvanised steel wire rope core iwrc/steel core as per is 2266/2002, tensile strenght-1770 n/mm2, length:70 meter, dia. of rope- 6 mm, construction 6x19, make-usha martin or equivalent., by pass seal bar assembly (one set consist of 1 hot end by pass seal bar -03 nos., 2 cold end by pass seal bar-03 nos.), hot intermediate end support grating plates, shoot blower warm gear box, air motor model no ir92ra014,5.51:1 make: ingersol rand or equivalent, pin rack assembly, guide bearing air seal assembly (consist of followings aluminium seal assembly (upper) -01 no. aluminum seal assembly (lower) -01 no. spring -06 nos. bolt-06 nos. nut-06 nos. locknut-06 nos. washer-18 nos. pin-02 nos. seal ring retainer-01 no., hot end sector plates including static seals on both side (along with fasteners) and tracking arrangements for inboard and outboard side for aph.one set consist of 03 nos sector plate i.e.a) sector plate fg to sab) sector plate fg to pac) sector plate sa to pa

Corporations/Associations/Others

CTN :42949481

12 Dec, 2025 13.35 Lacs

Multi City - Karnataka

Tender For purchasing of water supply procurement of materials required for the annual maintenance of the drinking water supply department within the jurisdiction of malebennur municipalitymaterials - solvent cement adhesive01, supply and delivery at site wrought middle steel (galvanized) gi back nut/ check nut confirming to is 1239-ii, 1991 with latest amendments if any. for 80 mm dia gi back nut/ check nut, bolts / nuts / washers ( ms general purpose ) water resources department sr 2023-24 volume-4 part i sl no 07 page - 17, providing, laying and fixing of gi pipes conforming to is 1239 1990 with latest amendments complete with gi fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) forheavy duty gi pipe etc. complete heavy duty gi pipe of 65mm dia, providing, laying and fixing of gi pipes conforming to is 1239 1990 with latest amendments complete with gi fittings excluding the cost of fittings with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. contractor will make his own arrangements for procuring water for testing forheavy duty gi pipe etc. complete heavy duty gi pipe of 50mm dia, providing laying and fixing of gi pipes conforming to is 12391990 with latest amendments complete with gi fittings excluding the cost of fittings with cuts and threads wherever necessary including testing for water tightness, with all lead and commissioning. contractor will make his own arrangements for procuring water for testing for heavy duty gi pipe etc. complete heavy duty gi pipe of 40 mm dia, supply and delivery at site special moulded variety pvc reducer as per is and fabricated as per ig124 1984 with isi mark with its latest amendments 75mm dia pvc reducer, supply and delivery at site special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark with its latest amendments 63 mm dia pvc reducer, providing, fabricaing and fixing at site various diameters of ms flanges as per is standards to fix sluice valves as per sketch. the rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of the engineer in charge for flanges of 100mm dia and 10mm thick, supply and delivery at site brand new best make starter/ control panel suitable for following hp centrifugal pump confirming with isi mark and its latest amendments.upto 7.5 hp centrifugal pump), supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments 1x3x4 sqm cable (suitable for over head mains), supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments 1x3x2.5 sqm cable, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of the work 2.00 hp1 5kw 12 stg, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-20003phase, ss bowl & impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of the work 3.00 hp - 90 lpm 66 m 10 stg outlet dia -2 00, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034 2000 3phase, ss bowl impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of the work 5.00 hp - 245 lpm 56 m 8 stg outlet dia 2.50, supply of gunmetal n

CTN :42683556

12 Dec, 2025 15.00 Lacs

Balaghat - Madhya Pradesh

Tender For gunmetal statue supply work of honorable atal bihari vajpayee ji

Gunmetal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Corporations/Associations/Others