Latest hallow block Tenders | Government hallow block Tenders

State Government

CTN :43411770

23 Jan, 2026 10.00 Lacs

Datia - Madhya Pradesh

Tender For supply of construction items

CTN :43401391

14 Jan, 2026 NA

Bareilly - Uttar Pradesh

Tender For supply of construction of basketball court : : - material for asphalt base 32 multiple 19 equal 608 sqm , all weather acrylic synthetic surface , basketball poles 8 inch with accessories , other items , all weather acrylic synthetic , material

CTN :43314087

07 Jan, 2026 10.95 Lacs

Jayal - Rajasthan

Tender For supply of laboratory items for govt college, jayal, nagaur-341023 - chemistry, hot air oven triple walled in construction with inner made of stainless steel & exterior of steel with powder coat finish. food grade silicon rubber gasket which acts as a perfect sealant. high density compressed 100 mm glass wool insulation between the walls to prevent heat dissipation. a fully insulated rigid door fitted with heavy duty hinges and ball catch locking system. temperature controlled by dual led display microprocessor based temperature controller & pt 100 sensors. heating elements are made of high grade nichrome wire and provided on the side walls of the chamber. air circulation by motorized blower placed on top of the oven. exhaust/ventilation provided on either sides. left & right sides of the inner chamber are duly perforated for proper air circulation & to maintain uniform temperature within the chamber. available with removable ss rod shelves 3 nos. temperature range: 5 c above ambient to 250 c. temperature accuracy: 0.5 c or better. working space 18 x 18 x 18 inch or capacity 95 liter. operates on 230 volts ac single phase 50 hz. safety feature: capillary type thermostat provided to take care of temperature overshoots, working space (wxdxh)inch: 14x14x14 capacity: 45 ltrs. watts: 1500 shelves: 2 nos., digital melting point apparatusmelting point apparatus with 4 digit, 7-segment led display is designed for accurate measurement of melting points and for checking the melting range of the solid samples. the apparatus consists of a silicon bath of about 200 ml capacity, covered with teflon cover with 3 holes fitted, with a special type of oil immersion heater having three holes for holding the capillaries, one for boiling point tube and one for the thermometer. the apparatus consists of in-built magnetic stirrer, an electronic controller with indicator for precisely adjusting the rate of heating of silicon oil-bath, an on/off switch, a pilot lamp, with magnifier, a glare free background illuminator, a high/low range temperature selector switch and digital temperature indicator with sensor extremely useful for pharmaceutical industry 4 digit 7-segment led display display 4 digit, 7-segment led display temperature 0 300 c resolution 0.1 c, sample amount fine powder properly dried at a temperature considerably below its melting point 4 6 mm high oil-bath silicon oil-bath beaker 200 ml capacity with teflon cover fitted with oil immersion heater. it has three holes for holding the capillaries, boiling point tube and thermometer stirrer speed controllable with front knob power 230 v 10%, 50 hz. ac dimensions 315 x 290 x 290 mm (l x b x h), analytical balanceinternal calibration (weigh sensor) to match the highest international standards. internal calibration fully automatic motorized internal built in weights calibration. perfect self auto calibration (psac) when the ambient temperature changes by a specific value or once a defined time interval has elapsed, it performs internal calibration. overload protection capacity tracker built into display for easily monitoring possible overloads. excellent readability high-contrast, backlit display 15mm digits size is exceptionally easy to read under any room lighting conditions. below weighing hook hook for weighing below the balance. automatic shut off for power saving mode, maximum capacity 220 gm minimum load 10mg readability 0.1 mg repeatability (sd) 0.1 mg linearity ( ) 0.2 mg, tare range (subtractive) 220 gm usp minimum weight 160 mg pan size (mm) 90 response time 2 - 3 sec. display alpha numeric backlite lcd display calibration motorised internal calibration units of measure gm, mg, ct, gn, mo, oz, dwt, t1t, t1h, t1s, mom, bat, ms operating temp. 18 to 30 c sensitivity drift. 2ppm (2 x 10 / c) -6 optional usb (windows direct communication). application modes pcs, % weighing, animal / dynamic weighing, check weighing, automatic density determination, formulation automatic st

CTN :42685704

02 Jan, 2026 55.79 Lacs

Nawanshahr - Punjab

Tender For bid to ras supply of furniture items c c--laboratory table with boxes , steel almirah , steel almirah small , computer table , computer and printer table , office table executive table , lecture stand , revolving chair small , three seat sofa , drawing stool laboratory table with boxes:laboratory table with boxes : table size: 2400 mm length x1200 mm width x 800 mm height (+/- 10 mm) frame: 48 mm square ms pipe and 1. 2 mm thickness. storage boxes: two storage boxes with doors and standard locks made up of 0. 8 mm crca sheet (+/- 0. 1 mm), top: top made of water proof ply board of thickness 25 mm pasted with 0. 8 mm thick sun mica, handle: plastic concealed handle of black colour. edges: edges cover with 2 mm thick hot glue pvc lipping pasted with cnc machine, colour: top mica chocolate brown, frame legs brown and storage boxes of cream colour. coating: powder coating range 50-55 microns. , steel almirah:size:- height-1981mm, width-916 mm, depth 486mm,construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final ) /bid number: gem/2025/b/6865848 * /dated: 10-11-2025 & & / bid document1 / 25finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. , steel almirah small :size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base, computer table :computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolerance on over

CTN :42931334

03 Jan, 2026 NA

Gurdaspur - Punjab

Tender For bid to ras supply of supply of 16 men shelter elevated type as per rfp , supply of construction material for 16 men shelter as per rfp , supply of electrical items for 16 men shelter as per rfp , supply of stores for 16 men shelter as per rfp , supply of errection tools for 16 men shelter as per rfp

Corporations And Associations And Others

CTN :43393329

07 Jan, 2026 32.18 Lacs

Delhi - Delhi

Tender For construction of community toilet block for children (boys girsl) at ekta vihar camp sec-6 r.k. puram by providing brick work, rcc items, steel work, tiles, distempering, paint and sanitary items in ward no. 152/sz

State Government

CTN :43409079

12 Jan, 2026 81.26 Lacs

Ambala - Haryana

Tender For construction of hockey astroturf and athletic track in modern sports complex, baragarh distt. ambala (pdg. solar power plant and solar water heating system with allied items).

State Government

CTN :43360882

09 Jan, 2026 NA

Chaibasa - Jharkhand

Tender For rate contract for branding coloring,pit formation and other work of ayushman arogya mandir(aam) at different facility at west singhbhum - items :, branding work as per annexure d (1), formation of sharp pit / medical waste disposal pit as per annexure d (2), formation of deep burial pit as per annexure d (3), coloring work of ayushman arogya mandir (aam) as per annexure d (4), complete repair work as per requirements, plumbing work as per requirements with sanitaryware hardware and fittings, electric wiring work as per requirements, formation or repair of yoga shed, formation of patient seating shed, repair of boundary wall, construction of slabs and ramps at entrance, repairing of doors and windows providing 2 coats of paint, makeover of old flooring including other repairing and cleaning

State Government

CTN :43390874

12 Jan, 2026 5.00 Lacs

Multi City - Karnataka

Tender For providing consultancy services for preparation of dpr for the work of construction of indoor stadium and supply of necessary sports items to kampli town kampli taluk ballari district under kkrdb macro projects for the year 2025-26

CTN :43334968

09 Jan, 2026 NA

Trivandrum - Kerala

Tender For supply and installation of plumbing items for the construction of isolation wards in kerala -zone 2. - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. conc

Hallow Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

State Government

State Government

State Government