Latest hammock Tenders | Government hammock Tenders

Central Government And Public Sector

CTN :41053089

14 Jul, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of pillow cover polyvastra 65 cm x 38cm(white) the following printed information should b e available in one corner of one side of the pillow cover: (a) n.f. railway (b) year & month of mfg. (c) name and brand. the colour should be fast and will not come out when wet. annexure-a the following printed information should be available in one corner of one side of the pillow cover: (a) n.f. railway ( b) year & month of mfg. (c) name and brand. the colour should be fast and will not come out when we t. annexure-a s/n.1 yam count(ne),warp, weft. spec no.33.2 s/2+-10%,33.2 s/2 +-10% s/n.2 thread/ cm,warp,weft. spec no.18+-10% 18+-10%. s/n.3 weight per sq.mtr(gm). 125+-10%. s/n.4 type of w eave. spec. plain s/n.5.breaking strength (kgf) (strip size 5x20 cms) wrap, weft. spec. 55 min-average , 52 min-individual, sample. s/n.6. scouring loss(%), spec. 2.0% max. s/n.7.ph value of aqueous, extr act, spec. 6.0 to 8.5 s/n.8.residucal starch content(%), spec. 0.1% max. s/n.9.relaxation shrinkage( %) warp,weft. spec. 1.0% max, 1.0% max s/n.10.blend composition(%) polyester, cotton spec. 60% t o 70%, 30% to 40%. s/n.11.water soluble matter(%), spec. 1.0 max. s/n.12.colour fastness to: (a) ru bbing staining on undyed cotton fabric. dry, wet. spec. 4 or better, 4 or better, (b). light blue wool r ating spec. 5 or better. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41053187

14 Jul, 2025 NA

Multi City - Multi State

Tender For supply of winter jacket, made in four layers, fabric: min. 75 gsm, 100% polyester, second layer: non- woven, third layer polyfil: min. 150 gsm, fourth layer: min. 45 gsm, with reflective tape. water repellent, railway logo and nfr/rny printed on back with reflective tape micro prismatic 13x18 cms. as per en: 1335 6-2001, with two cross pockets. make/brand: decathlon or similar(no logo or emblem of the seller should b e affixed). other specification as per attached drawing and specification sheet. [ warranty period: 30 mo nths after the date of delivery ]

Central Government/Public Sector

CTN :41055545

05 Aug, 2025 NA

Delhi - Delhi

Tender For supply of superior quality pillow for 1a filled filled with siliconized virgin hollow conjugated 15 denier polyester fiber, casing fabric type-1 of table-1, size-2 (55 x 40 cm 1cm) of table-5 as per is:18930 as as pe r nr drawing no. nr/hq/pffp/2024 (except bis marking) (zonal railway marking in place of northern railw ay) along with outer protective cover as per para 4.3 of is : 18930 and as per nr drawing no. nr/hq/popc/ 2024 to be provided. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :41055546

05 Aug, 2025 NA

Delhi - Delhi

Tender For supply of superior quality pillow for 2a & 3a filled filled with siliconized virgin hollow conjugated 15 d enier polyester fiber, casing fabric type-1 of table-1, size-6 (50 x 36 cm +/- 1cm) of table-5 as per is:18930 as as per nr drawing no. nr/hq/pffp/2024 (except bis marking) (zonal railway marking in place of northe rn railway) along with outer protective cover as per para 4.3 of is : 18930 and as per nr drawing no. nr/h q/popc/2024 to be provided [ warranty period: 24 months after the date of delivery ]

Central Government And Public Sector

CTN :41057906

11 Aug, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of pillow cover polyvastra 65 cm x 38cm(white) the following printed information should b e available in one corner of one side of the pillow cover: (a) n.f. railway (b) year & month of mfg. (c) name and brand. the colour should be fast and will not come out when wet. annexure-a the following printed information should be available in one corner of one side of the pillow cover: (a) n.f. railway ( b) year & month of mfg. (c) name and brand. the colour should be fast and will not come out when we t. annexure-a s/n.1 yam count(ne),warp, weft. spec no.33.2 s/2+-10%,33.2 s/2 +-10% s/n.2 thread/ cm,warp,weft. spec no.18+-10% 18+-10%. s/n.3 weight per sq.mtr(gm). 125+-10%. s/n.4 type of w eave. spec. plain s/n.5.breaking strength (kgf) (strip size 5x20 cms) wrap, weft. spec. 55 min-average , 52 min-individual, sample. s/n.6. scouring loss(%), spec. 2.0% max. s/n.7.ph value of aqueous, extr act, spec. 6.0 to 8.5 s/n.8.residucal starch content(%), spec. 0.1% max. s/n.9.relaxation shrinkage( %) warp,weft. spec. 1.0% max, 1.0% max s/n.10.blend composition(%) polyester, cotton spec. 60% t o 70%, 30% to 40%. s/n.11.water soluble matter(%), spec. 1.0 max. s/n.12.colour fastness to: (a) ru bbing staining on undyed cotton fabric. dry, wet. spec. 4 or better, 4 or better, (b). light blue wool r ating spec. 5 or better. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40724376

24 Jul, 2025 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of superior quality pillow for 2a & 3a filled with siliconized virgin hollow conjugated 15 de nier polyester fiber, casing fabric type-1 of table-1, size-6 ( 50 x 36 cm +/- 1cm) of table-5 as per is:1 8930 as per drawing in annexure-a along with outer protective cover as per para 4.3 of is : 18930 and as per drawing in annexure-b to be provided.(annexure-a and annexure-b attached). [ warranty per iod: 24 months after the date of delivery ]

CTN :41016970

16 Jul, 2025 NA

Multi City - Multi State

Tender For item code: 790900660012 item type : supply item description: supply of ready-made full sl eeve red colour woolen shirts (cots wool) for licensed porters (sahayak) over hwh division with two side pocket fabric polyester with cotton 65 /35 % blended quality and woolen red shirts 150-200 gsm and wool en shirts is durable fabric, moisture resistant, breathable and warm. size-40% (204 nos.) xl and 60% (305 nos.) xxl of total quantity (509 nos.). stitching and finished garment with both side pockets and logo of ea stern railway, howrah division to be embossed on left patch pocket. [ warranty period: 30 months after the date of delivery ]

CTN :40244641

12 Jul, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of ladies dress material fabric (q3) , shirting cloth (q3) , polyester blend shirting as per is 15852 (q2)

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Hammock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector