Latest hand tools scrap Tenders | Government hand tools scrap Tenders

CTN :41289220

22 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of extension ladder size closed 20ft xextension 50ft , clamp meter , insulation tester 500v to 200m ohms digital model vit 996 , cutting plier make taparia , wire striper 150mm , screw driver 30 cm long make taparia , screw driver set make taparia , electrical rubber hand gloves 11 kv , electrical rubber hand gloves 33 kv , industrial helmet , box spaner set make taparia , double ended spaner set make taparia , ring spaner set make taparia , l key set make taparia , hydraulic crimping tool upto 500 sqmm , discharge rod 11 kv , discharge rod 33 kv , pipe wrench 18inch make taparia , sliding wrench , insulation tape lt , insulation tape ht , carbon terminal cleaner ctc spray , corrosion reaction consultants crc spray , waste cotton , emergency light torch , ht meggar manual 5000 mega ohm make wacko cat part no waco wi5001 kv , hammer make taparia , earth resistance tester 4 terminal 0 to 2000 ohms make waco model no waco r4100 , vernier caliper size 300 mm , inch tape size 05 meters , inch tape size 30 meters , head torch light , fuel pump hand driven , screw gauge digital , laser level multipurpose laser tape

CTN :41258408

14 Aug, 2025 NA

Hingoli - Maharashtra

Tender For supply of providing and supplying of measuring steel tape , providing and supplying of combination plier insulated , providing and supplying of screw driver insulated , providing and supplying of electrician screw driver thin stem insulated handle , providing and supplying of heavy duty screw driver insulated , providing and supplying of electrician screw driver thin stem insulated handle , providing and supplying of punch centre , providing and supplying of knife double bladed electrician , providing and supplying of neon tester , providing and supplying of steel rule graduated both in metric and english unit , providing and supplying of hammer, cross peen with handle , providing and supplying of electrical symbol and accessories charts , providing and supplying of pipe vice cast iron with hardened jaw open type , providing and supplying of hand vice , providing and supplying of table vice , providing and supplying of hacksaw frame with blade , providing and supplying of file flat , providing and supplying of file half round , providing and supplying of file round , providing and supplying of pliers long nose insulated , providing and supplying of pliers flat nose insulated , providing and supplying of pliers, round nose insulated , providing and supplying of d.e. metric spanner double ended , providing and supplying of gauge wire imperial , providing and supplying of portable electric drill machine , providing and supplying of crimping tool , providing and supplying of pliers side cutting , providing and supplying of wire stripper adjustable length , providing and supplying of hammer, ball peen with handle , providing and supplying of scriber knurled centre position , providing and supplying of tool kit box bag portable , providing and supplying of allen key , providing and supplying of scissors blade , providing and supplying of pyranometer , providing and supplying of pyheliometer , providing and supplying of solar pv e learnig software //bid details 2 / 39

Central Government/Public Sector

CTN :41200187

14 Aug, 2025 NA

Koraput - Odisha

Tender For supply of 42-500-hand-drill-machine , 42-501-abrasive-cutting- machine , 42-502-hydraulic-crimping-tools , 42-503-digital- vernier , 42-505-box-spanner , 42-506-l-n-key-set , 42-507- l-n-key-set , 42-508-screw-driver , 42-509-start-screw- driver , 42-511-spring-nose-plier , 42-512-cutting-plier , 42- 513-pipe-spanner , 42-514-wire-cutter-stripper , 42-515- hammer , 42-516-measurment-tap , 42-517-ball-pin- hammer , 42-519-neon-tester , 42-521-round-file , 42-522- flat-file , 42-523-1-by-2-round-file , 42-524-adjustable- spanner , 42-525-spanner-d-type , 42-526-spanner-ring- type , 42-527-sprit-level , 42-532-welding-screen

CTN :41195594

16 Aug, 2025 8.79 Lacs

Chatra - Jharkhand

Tender For supply of drill mc 850w, supply voltage 220v , digital multimeter 3v , barrel pump , hand hyd crimping tool, size 16-400mm , contact cleaner , chn pulley block 3 ton , combine wrench set 6-32mm , cutting plier , adjustable wrench 8 inch , wrench 8-32mm w spanner rached , steel grip, length 25v mtr , grease gun lever type 450 with all sizes nipple , markin cloth , m seal , wd40 , cotton waste , hacksaw blade 12in , double faced hammer 5.4 kg , material handling trolley , screw driver bit size 25-110mm, with holder and rachet bit driver handle for hexa and flate type , anabond silicon sealant , grinding wheel, 100x6x16 mm , cutting wheel disc, 107 x1.2x16 mm , heat gun, 2000w, 220v , criping plier 0.25sqmm-10sqmm , tubular box spanner set , locking plier, 280 mm , pipe wrench, stillson type maximum opening 95mm , alen key set 1.2mm-12mm , wire rope cutter 18mm , hexa frame , plastic tool box with organizer 290 x 31 x 585 , pliers set with combination, cutting and long nose plier all standard size , araldite resin 1 kg hardener 800g total 1.8kg

CTN :41224433

04 Aug, 2025 NA

Gorakhpur - Haryana

Tender For supply of items as per annexure -1 are as ,item .1.self- adjustable ratchet type crimping tool to crimp insulated type lug crimping range 0.5 sq.mm -6 sq.mm ,qty-08 nos. make jainson,tapariya or eq uivalent . 2. hand operated light weight crimping plier for crimping pre insulated 3 in 1 lug for crimping co pper tubular lug for crimping range 1.5sqmm-6sqmm,q-08 nos. make-jainson, tapariya or equivalent. 3. he avy duty hand operated dieless hexagonal type compact crimping tool for crimping copper tubular lug for crimping upto 50 sq.mm lug ,qty-08 nos. make jainson, tapariya,or equivalent .4.pvc insulated hand oper ated wire cutting tool for cutting wire upto 70 sq.mm,qty-08 nos. make-jainson , tapariya or equivalent . 5. pvc insulated hand operated wire cutting tool for cutting wire upto 250 sq.mm,qty-05 nos. make-jainson , tapariya or equivalent .6.allen key long ball point set of size -1.5,2,2.5,3,4,5,6,8,10 qty-09 set make-tapar iya ,ingo or equivalent. 7. hand operated hydraulic compression compact crimping tool with dies size -25, 35,50,75,95,120,150,400 sq.mm qty-6 set make-jainson, power,xtra or equivalent .8. combination plier of l ength 165 mm, q-10 nos. make-tapariya, dewalt or equivalent .9. long nose plier of length 165 mm q-10 nos.make-tapariya,dewalt or equivalent.10. screw driver transparent green handle blade length-300 mm, qty-10 make-tapariya,ingco or equivalent. 11.supply of deep drive socket 12.7 mm square drive type of size-18,19,20,21,22,24 mm qty-05 set make-tapariya , dewalt or equivalent .12 supply of line tester for t esting current qty-10 nos.make tapariya, ingco,or equivalent .13.supply of insulated type wire stripping pi lers for striping wire upto 6sq.mm qty-09 nos.make-tapariya, jainson ,or equivalent. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40961496

01 Aug, 2025 NA

Bharuch - Gujarat

Tender For corrigendum : supply of bihexagonal ring spanner set of 12pcs s* , double open end spanners with rib set* , combination spanner 8mm to 32mm , bihexagonal 21sockets setv8 to 32mm chrome vanadium st in metal box 22soc & 5accs. is-7 , tubular spanner in set of 12 size 6x7mm to 30x32mm , heavy duty pipe wrench 12" , pipe wrench 18" , pipe wrench heavy duty 24" , pipe wrench l-1200mm , sledge hammer 20 lb , sledge hammer with handle 15 lb , sledge hammer with handle 10 lb , hammer with handle 6 lb , ball pin hammer 1 lb , adjustable wrench 8" , adjustable wrench 12" , double open end spanner 36x41 , double open end spanner 41x46 , chain pipe wrench 920mm x585mm , chain pipe wrench 1100mmx834mm , chain pipe wrench 1200mmx1100mm , chain pipe wrench 1610mmx1360mm , file 1/2 round 2 cut (2cut) 10 in , file flat 2 cut (2ble cut) 12in , flat file smooth 12" , needle file set , triangular file 12" , screwdriver, 300 x 10 mm , screwdriver flat blade 10x450 , long nose plier 6 in insulated , 7" external circlip plier , ratcheted torque wrench 7 to 35 kg- m , torque wrench cap100-400lb. ft 3/4" sq. dr , air ratchet wrench 1/2" sq dr , pneumatic impact wrench 1/2" sq. dr. , angle grinder 4" , grinder hand small (straight) , cutting pliers insulated handle , tool box with lock , allen key set 2 mm to 20 mm , allen key set 1/16 to 1/2 in , flat cold chisel 1x10 in , spirit level 18" , measuring tape 5 mts , insulated plier 8" with side cutter , screw driver , 10" engineers screw driver blade 8mm , polend type heavy duty hack saw fram 12" , screw driver set with tester , manual crimping tool upto 25 sq mm , cable stripper upto 5 sq mm , vice grip plier 230/250 mm , knife 6" , flat file rough 8" , round file rough 8" , half round file rough 8"

State Government

CTN :40625412

04 Aug, 2025 10.34 Lacs

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable item for emd-ii at stps. - fevi kwik tube 3 grams, fevi bond, fevicol sr 998 (200 ml/tin), measure tape 3 mtr long, crc-226 contact cleaner in 415 ml/300 gram spray bottle., wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., ac-90 airosole spray liquid for mart 415 gms, puff seal have polyurethene based foam sealing compound, painting brush size 2" (50 mm), painting brush size 4" (100 mm), elmexterminal connector 16mm sq type-cst-16, elmex terminal block ( cst-10 ), mcb 2 pole 20 amp,l 43220 ro, miniature circuit breaker [mcb] ,3 pole,16 amp.415 volt , 50hz, elcb+mcb 4 pole 63 amp 30 ma, mcb 4 pole, 100 amp, 440 volts, breaking capacity 10 ka, mcb 3 phase,4 pole, 63 amp 440 v ac 50 hz 10 ka, test leads (probes) for digital multimeter, hand lamp holder with 15 mtr wire and protection glass, ag-4 cutting wheel make:bosch, half round flat files smooth 6", screw driver (tester) taparia product no:813 yellow handle (special with neon bulb), screw driver (tester) taparia product no:818.special with neon bulb,generally confirming to is 5579-1985 grade - ii, yellow handle,, pvc insulation tape 19mm x 10 m, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, 1.1 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 50 mm dia. after shrink : 16 mm for 1.1 kv lt cable, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, heat shrinkable sleeve for lighting wiring, integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percentage, sutable to panel cut out 22.5 mm dia ,lens colour - red., hrc fuse link tia-63, 63 amp, hrc fuse link tia-25, 25 amp, hrc fuse 16 amp, alluminium ladder self supported a type having 08 feet length, taparia make utility knife. product no. uk-3., safety solvent co2 contact cleaner, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch

CTN :41184284

22 Aug, 2025 NA

Ahmednagar - Maharashtra

Tender For procurement of networking items - junction kit , cylinder 48 fiber core , cylinder 24 fiber core , isoprofile alcohol , sleeves , cutting plier , screw driver set , stripper optic fiber , crimping tool , lan testor , rj 45 connector , pig tail patch code 5 meter , pig tail patch code 2 meter , cat 6 cable , homi splitter (14) , homi splitter (18) , hdmi cable 50 meter , 24 core fibre cable , 06 core fibre cable , media convertor , 8 port switch , 24 port switch , vga spilter (1:4) , homi cable (20 meter) , hdmi cable 115 meters) , vga cable (20 meters) , vga cable (1.5 meters) , hdmi extender (60 meters)

State Government

CTN :40858954

30 Jul, 2025 7.20 Lacs

Durgapur - West Bengal

Tender For corrigendum : supply and delivery of tit-bit materials for a zone b zone c zone c1 zone ab zone and bamunara 132kv sub-stations under durgapur area office wbsetcl - hosiery waste large size cut pieces, make-reputed, cotton (jute) waste,make-reputed, petroleum jelly ( 1kg pack),make-reputed, mobil (1 ltr container), make-exxonmobil,castrol,gulf,iocl, crc contact cleaner (2-26,500 ml container), make-crc, hrc fuse-2a, make-siemens, l&t, abb, c&s and bussmann, hrc fuse-4a, make-siemens, l&t, abb, c&s and bussmann, hrc fuse-6a, make-siemens, l&t, abb, c&s and bussmann, hrc fuse-10a, make-siemens, l&t, abb, c&s and bussmann, hrc fuse-16a, make-siemens, l&t, abb, c&s and bussmann, led indication lamp, 24-240v ac/dc-red, make-apex,essbee,siemens,bussman,l&t, led indication lamp, 24-240v ac/dc-amber,make-apex,essbee,siemens,bussman,l&t, led indication lamp, 24-240v ac/dc-blue, led indication lamp, 24-240v ac/dc-green,make-apex,essbee,siemens,bussman,l&t, push button (no+nc),make-apex,essbee,siemens,bussman,l&t, tinned fuse wire, 5a capacity, 35 swg, make-reputed, drop-out fuse- 10a,make-siemens, l&t, abb, c&s and bussmann, tester, make-taparia, reputed brand, hi-beam 45w rechargeable well designed handheld search light complete set, light weight and water proof, make-philips, fos, eveready, bajaj, bosch gsb 500w 500re corded electric hand drill tool set- 10 mm, emery paper 40, reputed, emery paper 60, reputed, emery paper 100, reputed, pvc adhesive tape 3/4",20 m long-red, make-steelgrip(pidilite) , 3m, pvc adhesive tape 3/4", 20 m long-yellow, make-steelgrip(pidilite) , 3m, pvc adhesive tape 3/4", 20 m long-blue , make-steelgrip(pidilite) , 3m, pvc adhesive tape 3/4", 20 m long-black, make-steelgrip(pidilite) , 3m, crimping tool for 1.5 to 4 sq mm control cable, make-taparia,bosch,jansen, pipe wrench 12" make-taparia, stanley, eastman, gedore, pipe wrench 24" make-taparia, stanley, eastman, gedore, table vice 1" make-taparia, stanley, eastman, gedore,tata, box spanner (set) make-taparia, stanley, eastman, gedore, insulated cutting plier, make-taparia, stanley, eastman, gedore, hacksaw frame, make- reputed, hacksaw blade , make- reputed, flat file 6", make- tata, jk, taparia, dolphin, round file 6" make- tata, jk, taparia, dolphin, half round file 6" make- tata, jk, taparia, dolphin, slide wrench 18" make-taparia, stanley, eastman, gedore, wire stripper 6" make-taparia, stanley, eastman, gedore, ring type socket (alu.) -1.5 sqmm, make-connectwell, jhonson,jaison, ring type socket (alu.) -2.5 sqmm, make-connectwell, jhonson,jaison, ring type socket (alu.) -10 sqmm, make-connectwell, jhonson,jaison, ring type socket (alu.) -16 sqmm, make-connectwell, jhonson,jaison, ring type socket (alu.) -35 sqmm, make-connectwell, jhonson,jaison, ring type socket (alu.) -70 sqmm, make-connectwell, jhonson,jaison, terminal bock-25 sqmm, make- elmex,phoenix, wago, terminal bock-35 sqmm, make- elmex,phoenix, wago, d-wrench (set), make-taparia, stanley, eastman, gedore, ring-wrench (set), make-taparia, stanley, eastman, gedore, ratchet spanner,make-taparia, stanley, eastman, gedore, nose pliers, make-taparia, stanley, eastman, gedore, circlip plier 180mm, make-taparia, stanley, eastman, gedore, screw driver (set)-isulated, make-taparia, stanley, eastman, gedore, drill bit- morse taper sank for heavy duty (set), champion set ,make-taparia, stanley, eastman, gedore, cable tie- 100mm (pkt), cable tie- 200mm (pkt), cable tie- 300mm (pkt), copper flixible wire( 100m coil), 1.1kv-1.5sqmm-grey, make-polycab, kei industries, havells, finolex, copper flixible wire( 100m coil), 1.1kv-2.5sqmm- red,make-polycab, kei industries, havells, finolex, copper flixible wire( 100m coil), 1.1kv-2.5sqmm- yellow, copper flixible wire( 100m coil), 1.1kv-2.5sqmm- blue, make-polycab, kei industries, havells, finolex, copper flixible wire( 100m coil), 1.1kv-2.5sqmm- black,make-polycab, kei industries, havells, finolex,

State Government

CTN :41134252

02 Aug, 2025 70.83 Crore

Akola - Maharashtra

Tender For supply of t&p (neon tester, screw driver 100 mm., screw driver 150 mm, screw driver 250 mm, insulted plier 225 mm, insulted cutter cum squeezer, flat ended spanner (16x17), flat ended spanner (18x19), adjustable ratchet wrench spanner 1 , crimping tool for al. lugs, tong tester (dual range), helmet, lm zula, safety eye wear glass along with tool canvas bag) as per specifications for working line staff under akola circle

Hand Tools Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government