Latest handling crane spares Tenders | Government handling crane spares Tenders

Central Government/Public Sector

CTN :44947522

07 May, 2026 NA

Katipala - Karnataka

Tender For corrigendum : providing of custom bid for services - carrying out maintenance jobs of coke cutting system, heading/unheading/coker ball valves, bridge crane (41t), bop

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

CTN :44914813

11 May, 2026 NA

Barmer - Rajasthan

Tender For corrigendum : providing of facility management services - lumpsum based - industrial; periodic maintenance and breakdown maintenance of bridge crane of delayed coker unit at hrrl; consumables to be provided by service provider (inclusive in contract cost)

Central Government/Public Sector

CTN :45019328

06 May, 2026 NA

Tambaram - Tamil Nadu

Tender For auction sale of pway scrap - 1)condemned u/s cl.iii weighment rails - 1)cms crossing 52 kg - 2 nos, 2)check rail 52 kg - 5 nos, 3)tongue rail 52 kg - 6 nos, 4)glued joint 52 kg - 14 nos. quantity - 10.631 mts. ds8 no.932038 dt.12-01-2026. location - at tambaram yard, back side of rri cabin and opposite to railway quarters no. 412a and 417. 2)a)cms crossing(52kg/60kg) - 11 nos, b)check rail (52kg/60kg) - 21 nos, c)tongue rail (52kg/60kg) - 22 nos, d)glued joint (52kg/60kg) - 31 nos. quantity - 35.731 mts. ds8 n0. 932035 dt. 12.01.26. location - at tambaram yard - km tbm/1054 - tbm/f33. total quantity - 46.362 mt. note- 1]delivery to be made on actual weighment basis. 2]when crane loading is not possible, the purchaser [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs. 3] in case of excess on weighment of loaded lorry, purchaser [by engaging his own labourers/vehicle] has to cut/unload the excess quantity , handover the same to the custodian on a separate vehicle to the actual location or near to the weigh bridge as per the direction of custodian. 4)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions. 5)any clarification in location/ ds8 no & date - udm ds8/manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 6) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of do , ds8s, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 7)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.

Central Government / Public Sector

CTN :44856445

11 May, 2026 NA

Guwahati - Assam

Tender For corrigendum : providing of custom bid for services - operation & maintenance of bridge crane in delayed coker unit (dcu) at guwahati refinery tender no 9010c26a45

CTN :44908713

12 May, 2026 6.40 Crore

Sirohi - Rajasthan

Tender For procurement of equipment for guru vashisth temple and craft foundation (spv) pindwara bridge type stone cnc engraving double head machine, bridge type stone cnc profile double head machine, 4 axis rotary cnc cutting & engraving machine, heavy duty block cutter 2.3 mt., heavy duty block cutter 1.6 mt., 5- axis cnc wire saw cutting ht. 8 ft., slurry cleaning plant, eot crane capacity 10 tons, span 55 ft., gantry crane- v type cap.35 tons span 40 ft. l- 100 ft., transformer, electric panel, earthing, cable,

Central Government/Public Sector

CTN :44882329

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - p.l. no. 98090719 condemned and unserviceable magnetic stainless steel scrap consisting of cuttings of plates / sheets / angles / channels , profile cut plates , fabricated / cut up parts of wagon of sorts and sizes. note:-1). cssd / goc electronic weigh bridge to be used for weighment. 2). loading by crane / jcb is permitted.

Central Government/Public Sector

CTN :44882339

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 3.5 ton u.h jib crane [yd cr 774] with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, electrical wirings, hooks, snatch blocks/hook blocks, wire ropes carrying the hooks and gear boxes driver cabin,fans,alarms,ladder inside the driver cabin,master controls,lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements note: main power collection bus bars/angles, main ladder to climb onto the crane are not for sale and these should not be disturbed by the purchaser as these belong to railways. uc no. 123133002. makers name-greaves chitram co.total approximate weight 21600 kgs. [mild steel 21333 kgs, cast iron 200 kgs, copper 40 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 20 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-00915 dated. 26.11.25. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.

Central Government/Public Sector

CTN :44882341

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 15 ton eot crane (crs-cr-711), with overall span of 14.376 mtrs, with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings,driver cabin,fan,alarms,ladder inside the driver cabin,master controls, wire ropes carrying the hooks, lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements. note: hooks, snatch blocks/hook blocks, main power collection dsl bus bars/angles of the crane, main ladder to climb onto the crane, two long travel gear boxes and one cross travel gear box are not for sale. the two long travel gear boxes, one cross travel gear box, hooks and snatch blocks/hook blocks should be returned to the custodian by the purchaser before delivery. for handing over the gear boxes, purchaser should follow dismantling using proper tools instead of cutting in order to avoid damages. main power collection bus bars/angles and the ladder to climb on to the crane should not be disturbed as these belong to railways. uc no.120732002. makers name-vaughan crane/england.total approximate weight 11000 kgs. [mild steel 10687 kgs, cast iron 200 kgs, copper 56 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 50 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-01419 dated. 20.02.26. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.

Central Government/Public Sector

CTN :44867822

22 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of pway scrap - cond. u/s cl.iii pway ms scrap- er clips - 47526 nos. qty - 41.490 mts. ds8 no. 029828-25-00006 dt. 04.03.2026. location - svf yard between svf/1003-1011 on up line in sse/pway/put section. note- 1)delivery to be made on actual weighment basis. 2)in case of excess on weighment of loaded lorry, purchaser [by engaging his own labourers/vehicle] has to cut/unload the excess quantity , handover the same to the custodian on a separate vehicle to the actual location or near to the weigh bridge as per the direction of custodian. 3)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - udm ds8/manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 5) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 6)custodian should arrange to issue hard copy(phostat) of do , ds8s, etc., to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 7)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.

Handling Crane Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector