Latest handling machine repair Tenders | Government handling machine repair Tenders

CTN :39958770

21 Apr, 2025 2.87 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis during the monsoon period 2025 for the jurisdiction of ranaghat irrigation section i under ranaghat irrigation sub-division ranaghat nadia. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958778

21 Apr, 2025 2.91 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under the jurisdiction of ranaghat irrigation section ii under ranaghat irrigation sub division. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958827

21 Apr, 2025 3.84 Lacs

Nadia - West Bengal

Tender For corrigendum : procurement of flood fighting materials along with cutting cleaningofjungles along withclosesurveillance of the banks of river bhagirathi attarapur embankment durinng the monsoonperiod of theyear2025under thejurisdictionofranaghat irrigation sub div. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

State Government

CTN :40007557

17 Apr, 2025 43.88 Lacs

Delhi - Delhi

Tender For carriage of desilted soil and other waste materials from bank of new drain from rd 0 m to rd 5300 m by mechanical means, including loading, transporting, unloading and dispose to approved mcd/slf dumping site with jungle clearance

Central Government/Public Sector

CTN :39974772

02 May, 2025 NA

Nagpur - Maharashtra

Tender For proposed supplying and stacking of machine crushed ballast from outside quarry as per revised ballast specification of feb. 2023 and loading the same into the ballast hoppers by mechanical means at hinganghat depot under aden warora sub division (qty.50000.00 m3).

Central Government/Public Sector

CTN :39986994

21 Apr, 2025 10.59 Lacs

Bishrampur - Chhattisgarh

Tender For providing of handling ,transport and other mining services - percentage quote based - hiring of pay loader for mechanical loading of 22500.00 te of g-7 grade coal from rehar underground mine stock ground stock yard in totippers . (lead 0-1 km (actual 0.50 km), 250 tpd..

State Government

CTN :39930654

17 Apr, 2025 7.44 Crore

Noida - Uttar Pradesh

Tender For camc for 2 year electrical, mechanical and instrumental work of mr, ar-1,3,4 and zr- 1,2,3,4,5,6, 7, 8, 9, 10, 11, 15 and 19, at 85 cuse ganga jal project in greater noida. - maintenance of submersible pump including all loading - unloading, testing and commissioning caring from site to workshop & back to site etc. with ci casing, cf8 m impeller, ss 410 shaft ci casing wearing ring & bearing bush, tc/ sic mechanical seal, ss strainer etc suitable for 3 phase, 415 v, 50 hz, ac supply, submersible motor having tefc enclosure with class h/f insulation as per specs and ip 68 protection. the pump shall be operated at suitable rpm as per data sheet. the scope includes all required accessories viz. automatic coupling device,g.i guide pipe, chain with shackle , flat/ round submersible cable upto starter panel through suitable size g.i. pipe with necessary electrical connection with the starter panel and as per specifications complete in all respect as per direction of e/i ., 160 kw motor rating (ksb & aqua), supply/replacement motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 110 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 90 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 75 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 37 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 30 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 5.5 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), 3.7 kw motor rating (ksb & aqua), s/r motor winding, s/r impeller, s/r pump cable (approx. 20 mtr), s/r shaft, s/r mechanical seal, s/r bearing bush, preventive maintenance (quarterly & as when required), maintenance of motor operated double flanged, c.i. sluice valve including all loading - unloading , testing and commissioning caring from site to workshop& back to site. complete in all respect as per direction of e/i ., 1400 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 1000 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 700 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 600 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 500 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 450 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 400 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance (quarterly & as when required), 350 mm sluice valve (ivc & kirloskar), s/r motorizing actuator, s/r shaft, preventive maintenance

CTN :39907875

22 Apr, 2025 NA

Jammu - Jammu And Kashmir

Tender For rate contract for supply of allied material for reclamationrepairre-build of damaged distribution xmers of various capacities ranging from 25kva to 630 kva in ediii jpdcl for the fy 2025-26 or till next tender is finalized - lt bush rods of brass (m-12), lt bush rods of brass (m-20), lt bush rods of brass (m-30) l.v. bush rods of brass m-30/m-40, ht bush rods of brass (11 kv), lv brass bush rods 12mm ( in exchange of burnt/ damaged one), lv brass bush rods 20mm ( in exchange of burnt/ damaged one), lv brass bush rods 30/40mm ( in exchange of burnt/ damaged one), hv brass bush rods (11kv) ( in exchange of burnt/ damaged one), lv bushings (12mm), lv bushings (20mm), lv bushings (32/30 mm) , ht bushing (11 kv), film paper, lethoride paper/khakhi paper, press boards, gutties, rubber washer of different sizes, ht washers, lt washers m-12, lt washers m-20, lt washers m-30/m-40, cork sheets (1000mmx500mmx5mm), rubberized cork strip(40mmx5mm), bakelite tubes, cotton tape, nawar tape, m.seal, glass sleeves, insulation gum, wooden wedges, craft paper, packing sheets, aluminum gutka, nuts & bolts, h.t. bush clamps, copper brazing rod, aluminum brazing rod, h.t / l.t oil seals-12, h.t / l.t oil seals-20, h.t / l.t oil seals-30/40, cotton waste (old cotton sarres/cloth), m.s washers for l.t connections, plugs of different sizes 1 1 , flux, grey paint, turpentine oil, varnish, welding rods (8mm & 10mm), oven heating/elements coils, 3 multi stands cu cable (10 mm ), thinner, crepe tape, oxygen cylinder (refill), megger (500volt, 5000 mw), oxygen regulator, oxygen cylinder nozzle, oxygen pipe for gas cutter, clamp for oxygen pipe, c clamp 18 , hydraulic transformer lifting trolley, trolley for scrap loading/unloading, clamp meter, welding helmet, welding cable with holder, cutter pliers, screw driver (all sorts), ratchet wrench with socket set compete, pipe wrench 12 , pipe wrench 18 , bolt cutter 12 , bolt cutter 18 , spanner 15/21 mm, spanner 38/48 mm, oven thermostat (0-300 amp), contractor 63 amp isi ,10ka of reputed make, cable wire 16 mm., filter plant high pressure supply hose 25 mm (1 ), 35 bar/500 psi, filter tank pipe rubber, wooden frames for winding of ht /lt, exhaust fans for workshop 24 heavy duties, pedestal fans for workshop (heavy duty), out side clipper for winding machines, inside clipper for winding machines, heavy duty drill machine (1050 watt), scissors (large size for cutting papers), test cell of oil testing machine (60kv) (500 ml/ acrylic test cell) with removable & adjustable electrodes, ht/lt winding machines bearing, ht/lt winding machines bearing vee-belts, ht/lt winding machines bearing gear-box, ht/lt winding machines bearing foot-switch, ht/lt winding machines bearing counters, 1 hp pump motor centrifugal, change over switch 400 amp, mccb 4 pole 100 amp(25ka), scale steel 1 meter, scale steel 12 inch, eot crane switch, angle grinder (850 watts), air blower macine (900 watts), digital micrometer 0 to 25 mm, lpg 19 kg (refill), laminated core of all sorts, multi stand 3 core copper cable 10 sqmm, testing clips, saw dust, dust sand, led light street light150 watt(ip67), led light flood light200 watt(ip67), steel sand buckets, fire extinguisher mechanical foam 50 ltr, fire extinguisher (refill) 50 ltr, oven blower 1450 rpm, twin core 16 sqmm cable (copper), twin core 16 sqmm cable (aluminium)

CTN :39852516

16 Apr, 2025 68.79 Lacs

Mumbai - Maharashtra

Tender For electrical engineering instruments (part-1) (as per tender form) - description. please quote the prices after carefully considering the specs, installation and warranty requirements given in the tender form, 1 phase (dimmer) auto transformer, 3 phase (dimmer) auto transformer, 3 phase(dimmer) auto transformer:, squirrel cage induction motor with dol starter, variable inductor., slipring induction motor with rotor resistance starter., analog tachometer contact type(mechanical), current transformer (ct) and potential transformer (pt) test set-up, d c power source- rectifier unit 10 kva:, d.c. supply unit(5kva), dc motor generator set, dc power source transformer rectifier unit-25kva, dc power source transformer rectifier unit-25kva, dc power source transformer rectifier unit-25kva, dc regulated power supply (variable), dc series motor, dc series motor :, dc series motor brake test trainer kit, set up for performing break load test, dc shunt motor, dc shunt motor, dc shunt motor - alternator set, dc shunt motor - dc shunt generator set, dc shunt motor- alternator set, dc shunt motor- alternator set, dc shunt motor - dc shunt generator set, dc shunt motor with pully belt arrangement, dc shunt motor-alternator study kit, generator set with squirrel cage 3 phase induction motor- 3hp or 5hp, three phase,5 hp,415 volt 50 hz squirrel cage induction motor ., pole changing three phase induction motor with control panel, 5 kw 3 phase 415 volt,star/delta connected lamp load (resistive load), dc series motor with pully belt arrangement for performing break load test, motor- alternator set with d.c shunt motor, rectifier unit, rectifier unit, resistance load bank, resistive type load bank 2kw, single phase auto transformer, single phase auto transformer, single phase auto transformer, single phase autotransformer, single phase induction motor., single phase transformer, single phase transformer, single phase transformer, single phase transformer, single phase transformer, single phase transformers, slip ring induction motor, squirrel cage induction motor with loading arrangement, squirrel cage induction motor with single phase preventer, stroboscope, tachometer, three phase auto transformers, three phase auto transformers, squirrel cage induction motor with single phase preventer, three phase synchronous motor, three phase synchronous motor, three phase synchronous motor with damper winding with loading arrangement, three phase synchronous motor with damper winding with loading arrangement, three phase synchronous motor with damper winding with loading arrangement, three phase transformer, three phase transformer, three phase transformer, three phase transformer, three phase transformer trainer kit, transformer oil testing system, transformer oil testing system, transformer oil testing system, transformer rectifier, wind power generation trainer kit, work bench of squirrel cage 3 phase induction motor-

Handling Machine Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government