Latest hardware items Tenders | Government hardware items Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

Central Government/Public Sector

CTN :40519779

16 Jun, 2025 NA

Dangs - Gujarat

Tender For rate contract for electric & hardware items , hair cutting , tuck shop , washing & ironing

Central Government/Public Sector

CTN :40538983

13 Jun, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of wheel distance measuring gauge as per following specn:- length: 1596 +/- 0.5mm (range 1585 to 1605mm) for meserment . accuracy : 0.1mm through vernier scale. setting : must set 90 degree to the flange . parallelism : to the main axle prospective of track level which should be indicated by the same equipm ent . material: hard extruted steel tube with 1.2mm thickness. fixed lug on one end spring loaded moving lug on the other end with locking system. spirit level in the center of the gauge. packing: wooden box. [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40255273

09 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For corrigendum : supply of set of locking plates for center pivot ring and housing ring for three phase lo co as per clw drawing no. 1209.01.413.025 alt-1, ref 1 & 2. one set consists of 2 items 12 nos. and qty. of each item is 6 nos. per set. (item is reversed for clw approved sources only). [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538211

09 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of locking plate for wheel and axle to icf drg. no. - t-0-2-637, alt. - c/3 [ warranty perio d: 30 months after the date of delivery ]

State Government

CTN :40544162

10 Jun, 2025 2.11 Lacs

Punalur - Kerala

Tender For balance work such as vitrified flooring toilet flooring and wall tiles with ceramic tiles final painting door and window painting inter locking tiles sanitary fittings for toilet are incorporated

State Government

CTN :40557170

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of providing and fixing for exavation for sit gravl soft murum , providing and fixing soling using 80 mm size trap metal in 15 cm , providing and laying cast in situ ready mix cc in m10 of trap gneiss metal , providing and laying in situ ready mix m20 cc of trap gneiss metal for approach slap , providing and fixing wid cutting transverse contraction joints 3 to 4 mm wide and depth 60mm , providing and fixing of contraction joints polysuphide sealent , supplying and steaking hrd murum kankar at the site, including conveying , providing and fixing in position tmt or equi fe 500 bars reinforcement of various dia , providing and spreading hard and soft murum gravl or kankar for side width complete , providing and fixing heavy duty inter locking c rubber mould glossy paveen blocks , providing for removing cement tiles, or marble or polished shahabad floor , providing and laying vitrified rustic matt stone finish tailes having size 590 mm to 605 mm x 590 mm to 605 mm , providing and fixing fals seiling of 12 mm thick laminated board with frame , providing and fixing in position, acoustical panelling made from fabric wrapped compressed polyester fibre nonwoven 9 mm , toughened glass 12 mm , providing and fixing kouch set 311 brown and cream leather dimension length 182.5 cms breadth cms 100 cmsheight cms 100 cms weight kilograms 66 kilogram , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustbl armrest, gaslift for sit height adjustment, standard 5prong pornylon base with leatherite upholstery , executive tbl at 2250lx2100dx750ht including low height credestal at 1200lx450dx650ht providing and fixing of tbl at 2250lx2100dx750ht top , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric and telting with chain ball system with all necessary fixtures and fitting , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for sit height adjustment, standard 5prongornylon base with leather upholstery

State Government

CTN :40557204

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of red or , filling in plinth and floors with contractors material or brought from outside and approved by engineer incharge , providing and fixing country cut teak wood double or single leaf second class fully panelled door shutter , providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm , library area table providing and fixing of free standing table at 1350lx750dx 750ht , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for seat height adjustment, standard 5 prong or nylon base with leather upholstery , free standing table at 1500lx600dx750ht providing and fixing table of size 1500 x 600 x 750 mm. , toughened glass 12 mm , conference table at 3600lx1400dx750ht providing and fixing of main table made up of 18plus18mm thick mdf top with pvc membrane finish and waterfall edge profile. , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, , supplying and fixing samsung led backlit lcd 55 3840x2160 uhd smart tv,tizen os mount type both table , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position , providing and fixing on walls or ceiling or floor 15 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 25 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 40 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing c.p. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange , providing and fixing 450mm x 550mm size superior type belgium mirror with 16mm dia. nickel plated towel rod , providing and fixing 100 mm dia stabiliser pipe or p.v.c. soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps , providing and fixing white european type wall hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor mounting frame , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber , sliding window 3 track 2 glass shutter plus 1 flymesh of approved make with dgu, providing and fixing of sliding , carpenter i class skilled , providing and fixing table top white wash basin of size 120x635x405mm rubber plugs and brass chain

Central Government/Public Sector

CTN :40538037

06 Jun, 2025 NA

Harnaut - Bihar

Tender For supply of locking plate, for wheel and axle. drawing no. t-0-2-637, alt- c/3 [small 'c' ]

Central Government/Public Sector

CTN :40522926

18 Jun, 2025 NA

Dakshina Kannada - Karnataka

Tender For supply of seal kit -hydraulic tracking cylinder - l04611 , seal kit -locking cylinder-54631 , hydraulic cylinder tracking - p211761 , pressure filter element 0060-d- 005-bh-hc -l29003 , oil filter - l31951 , filter element-l29005 , filter element-rfi00310948 , air filter-rfi311525 , filter plate side piece lengthwise pom -p414733 , seal kit for q.a.c-f630266

Hardware Items Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors