Latest hazardous waste sample analysis Tenders | Government hazardous waste sample analysis Tenders

CTN :44006234

26 Feb, 2026 18.60 Lacs

Sriharikota - Andhra Pradesh

Tender For supply, installation, testing and commissioning of flameproof digital indicator panels for load cell based sensing systems

State Government

CTN :44065050

23 Feb, 2026 1.28 Lacs

Kinnaur - Himachal Pradesh

Tender For supply, installation, testing and commissioning of lt control cubical assembly with protection and metering for motorized load

State Government

CTN :44022453

23 Feb, 2026 NA

Dharwad - Karnataka

Tender For supply, installation, testing, and commissioning (sitc) of specialized laboratory furniture - supply and fixing of furniture work for laboratory at nfsu dharwad campus, c-frame m-island (crca) - 4560 mm (l) x 1260 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (62 sq ft) assembly of construction for work bench: c frame systems are the modern lab furniture architecture. based on a cantilevered design, c-frame systems do not need legs for support. c-frames assemblies are manufactured from standard hollow metal sections, confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components are of crca confirming to is code 513:1994. the suspended under-bench welded units are supported on heavy-duty steel frames fully carrying the load of worktops. c-frame are constructed from a rectangular pipe with a cross section of 60mm x 30 /40 mm and 1.6/2 mm thick, are without a vertical front leg to give a clean look. the c-frame legs are supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the structure has removable back panel (wherever required as per design finalization) to provide access for maintenance throughout the length of table. the structure shall be duly treated for the rust prevention and coated with epoxy powder coated (with minimum thickness of 60 micron). the horizontal frames connecting the c frames and other required frames shall be of the similar specifications. together with the c-frames and horizontal members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide one drawer two shutter with one shelf storage, 2 no wheel lockable + 2 no wheel non lockable (qty - 6) structure - 60 mm x 30 mm x 1.6 mm ms pipe (qty - 5) filler panel - removable panel 600mm to 900 mm (qty - 12) - filler panel (qty - 2) reagent rack - double side double tire reagent rack - (qty - 3) electrical module - 3m plate with 16/6 amp socket and 16 amp mcb or switch (make: havells/anchor / norysis/equivalent) (qty - 12), plinth m-wall (crca) - 1400 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (11 sq ft) material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide two shutter under sink (qty - 2) filler panel - filler panel (qty - 2) sink & tap - polypropylene sink 560x355(qty - 2) - three-way swan neck cpve & brass faucet (qty - 2), d-frame m-wall (crca) - 1200 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabine

corporations/Associations/Others

CTN :44070854

03 Mar, 2026 NA

Salem - Tamil Nadu

Tender For mtps i m i circle bm rotating parts units i and ii load testing and certification of movable trolleys chain blocks located above primary air fan forced draft fan aph induced draft fan and esp area

CTN :44005094

27 Feb, 2026 NA

Thoothukudi - Tamil Nadu

Tender For ttps - mech.ii - ahp overhauling and load testing of 5.0 ton capacity eot cranes at stage-i & ii ash slurry pump house note: prospective bidders may get the specification free of cost by down loading from tangedco website

CTN :43813599

26 Feb, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing and commissioning of flameproof digital indicator panels for load cell based overload sensing systems.

Central Government / Public Sector

CTN :44050868

24 Feb, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot miscellaneous scrap - tools scrap: actual lot no 031126020043 pl-98090616 [hsn -82013000;gst@18%on fcm basis ] cond& u/s scrap of various tools which are unserviceble/damaged condition said to contain -various types of wrenches ,screw drivers, spanners ,chisels,&cutting pliers , grease guns, bench vice ,cylinder,turfors,pull lifts,punches diff types,crimping tools,knife clasp blade,gauge for point testing,electronic/manual toe load measuring device,magnetic thermo meters,hand drilling,manual torque multipie,simplex jack,hacksaw blade frames,blades,auto self adjuster,flaring tools,hammer sledge,wire brushes,portable track lifting devices,chamferring kit,hand crimping tool,crow bars,padlocks,bender,fume extracter,telescopic stand,busterpunches,tapes,weighing stones,grass cutters.tools may or maynot contain all original parts/attachements &may be full or damaged or broken condition.total weight of 3535 kg, said to contain ms -3470 kg ,aluminium -25kg ,plastic -15kg ,rubber -25kg appoximately . location : new yard bin no- 23 ,inside nf ward drum no-23(image attached)

CTN :43529952

18 Feb, 2026 NA

Jalpaiguri - West Bengal

Tender For bid to ras supply of inch or 6 inch , pvc sunken box of size 4 inch x 8 inch , sheet steel enclosure for mcb spn db 8 way , thread seal tap 10 mtr long , street light 40 watt led in aluminium pdc housing , cable pvc frls copper conductor 1100 volt single core 4 sqmm 100 mtr per roll , cable pvc frls copper conductor 1100 volt single core 1 sqmm,100 mtr per roll , ph test kit with phenol red range 6. 8 to 8. 4 and 100 ml testing solution , phenol red solution for ph test in bottle of 500 ml , smoke detectore , sprincler single head , cotton waste , pvc saddle 25 mm , pvc saddle 20 mm , pvc saddle 8 mm , ms saddle 25 mm , ms saddle 20 mm , ms washer 3mm thick 8 or 10mm , ms washer 3mm thick 20 mm , split spin for ceiling fan , petroleum jelly , grease white , heating element for geyser 1. 5 kw clamp type , modolar switch 6 amps one modolar , on load manual changeover conforming to iec 60947-3 of range 200 amps 4 pole , on load manual changeover conforming to iec 60947-3 of range 250 amps 4 pole , industrial type recessed mounted 100 watt led light , led post top aluminium top reflector with ip 66 25 watt , nrv for geyser of capaciy 25 ltrs , screw brass 16mm to 19 mm , casing capping 20mm , brass nut bolt , pvc box with ss 5 amp , pvc box with ss 15 amp , selector switch , led fitting 1 x 10 w , led flood light 45 w , led flood light 200 w , compression type aluminium lugs suitable for 06 sqmm , compression type aluminium lugs suitable for 10 sqmm , mccb 250 amps 36 ka 4 pole , on load change over switch 200 amps 415 volt , on load change over switch 63 amps 415 volt , power unit 25 amps complete 4 modolar plate starter plug and socket , industrial cable with al conductor xlpe cable of size 3. 5 core x 35 sqmm , surge protection devices with 1 phase and 1 nutral 2 module 50 ka , surge protection devices with 3 phase and 1 nutral 4 module 50 ka , surge protection devices with 1 phase and 1 nutral 2 module 15 ka , surge protection devices with 3 phase and 1 nutral 4 module 15 ka , cable frls cable aluminium conductor 1100 volts capacity twin core x 6 sqmm , compression type aluminium lugs suitable for 120 sqmm , compression type aluminium lugs suitable for 35sqmm , led lamps 10 watt b-22 base , led tube light fitting 18 watt with batten , led tube light fitting 10 watt with batten , led highway flood light with high luminous efficiency input power 150 watt , led flood light 160 watt, 50 hz, 240 volt , mccbs 100 amps, 415 volts, 4 pole 16 ka , mccbs 125 amps, 4 pole 16 ka , modular white cover plate 6 module , multipurpose switch socket combination 5 pin flush type 15 or 16 amps , pvc frls cable copper 1. 5 sqmm 3 core 100 mtr per roll , pvc frls cable copper 2. 5 sqmm 3 core 100 mtr per roll , recess mounting ceiling type led 2 x 2 luminaire 45 watt , led flood light 60 watt, , led street light 90 watt , mnx type 3 pole power contractor mnx 12 , mnx type 3 pole power contractor mnx 22 , mnx type 3 pole power contractor mnx 25 , mnx type 3 pole power contractor mnx 32 , mnx type 3 pole power contractor mnx 40 , mnx type 3 pole power contractor mnx 50 , mnx type 3 pole power contractor mnx 70 , mnx type 3 pole power contractor mnx 80 , mnx type 3 pole power contractor mnx 95 , mcb sp 16 amps 10 ka,b curve , plug and socket db 32 amps 3 pin 4 module , cable join kit for 33kv earhted grade cable for indoor size 95 sqmm to 150 sqmm , cable join kit for 33kv earhted grade cable for outdoor size 300 to 400 sqmm , led facade light 120 watt , led pannel light 4 feet x 1 feet 36 or 40 watt , hose reel 63 mm dia , led aviation light 10 or 12 watt , dc power //bid details2 / 112pack for circuit breacker pannel with 24 v dc battery back up , flame proof switch 5 amp , delite led 18 watt with batten 6000k , led street light 70 or 72 watt, 240 volt, ip 66, 50hz , led street light 60 watt,240 volt, ip 66 , led street light 45 watt 240 volt,ip 66,50 hz , led flood light 120 watt , led flood light 100 watt , mccb 400 amps 36 ka 4 pole with spreader

Central Government/Public Sector

CTN :44008390

24 Feb, 2026 1.51 Lacs

Nagpur - Maharashtra

Tender For providing of custom bid for services - non destructive testing safe load testing and air tank testing of rhino 110c ace make 8te crane serial no acer110chg0337686 registration no mh40be9905 deployed at mkd3 ocm

Central Government/Public Sector

CTN :44010615

17 Mar, 2026 1.80 Crore

Nagpur - Maharashtra

Tender For tender for supply of sitc of ipepabx system with accessories and manpower deployment for 10 years d d - supply of dual server gateway based ip pbx system in raid 1 storage configuration. , supply of executive ip phones with 2 way speaker phone , supply of poe based ip phones , supply of 24 port l2 plus managed poe/poe+ switch with fully loaded sfp modules single mode transceiver. , supply of 16 port l2 plus managed poe/poe+ switch with fully loaded sfp modules single mode transceiver. , supply of 8 port l2 plus managed poe/poe+ switch with fully loaded sfp modules single mode transceiver. , supply of 24 core core armoured single mode ofc cable , sitc of licensed (perpetual) nms software (software for monitoring the health of all ip devices of the network on single window). , supply of corded analog phone with cli , sitc of management platform inclusive of management software of epbax system with perpetual license , supply of licensed (perpetual) recording application (to be played at operator console) , supply of pc based ip operator console in raid 1 storage configuration with licensed version of software(latest) , supply of laptop based ip operator console with licensed version os and ms office (latest) , supply of cat 6a cable industrial grade including capping , casing , conduiting fasteners with all materials. , supply of cat 6a utp patch cord 3 meter each. , supply of 3 core power cable 2.5mm each core. , supply of intermediate distribution frame idf for 100 pairs , supply of intermediate distribution frame idf for 20 pairs , supply of intermediate distribution frame idf for 200 pairs , supply of intermediate distribution frame idf for 400 pairs , supply of 0.5mm , 50 pair copper cable (armourd). , supply surge protection device for idf krone type (10 pair in each krone). , supply of 0.5 mm , 20 pairs telephone cable. , supply of rack mounted ups 2 kva line interactive , 30 min backup for network switches , supply of rack mounted ups 1 kva line interactive , 30 min backup for network switches , supply of rack mounted 5 kva online ups , 60 min backup for epabx servers and gateways , supply of fully loaded 42u rack for epabx server its accessories with cable manager 2 pdu , supply electrical distribution system (with industrial grade mcb) as per ip epabx system requirement (min. 32 amp.) with rccb. , supply of 3 core power cable 6 sq. mm each core , supply of rack mounted load transfer switch (auto changeover switch for ups output) , supply of surge protection device spd lan , supply of power surge protection device spd for 5 kva ups single phase in - single phase out , supply liu 24 core with pig tail (testing of fiber termination) , supply rj 45 patch panel 24 port , supply of12u rack for poe switches & its accessories with cable manager & pdu. , supply of io boxes with dual rj45 ports with gang box and cover , supply io boxes rj45 ports with gang box and cover , supply io boxes with dual rj11 ports with gang box and cover , supply of dual broadcast port gps based ntp time reference system (as per specification sheet) with accessories (antenna pole and mount , gps bullet antenna with 65ft. cable , single lighting protector) , itc of dual server gateway based ip pbx system in raid 1 storage configuration , itc of executive ip phones with 2 way speaker phone (installation , testing and commissioning) , itc of poe based ip phones (installation , testing and commissioning) , itc of 24 port , 16 port and 8 port l2 plus managed poe/poe+ switch with fully loaded sfp modules single mode transceiver. , itc (including laying) of 50 pair copper (rc) cable (0.5mm) and 24 core armoured single mode ofc cable , itc of corded analog phone with cli , itc of pc based ip operator console in raid 1 storage configuration with licensed version of software(latest)(for boq line item 12) and recording application (for boq line item 11) , itc of cat-6a cable (for boq item 14) industrial grade , itc of 3 core power cable 2.5mm each core.pa

Hazardous Waste Sample Analysis Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector