Latest hdpe tee Tenders | Government hdpe tee Tenders

State Government

CTN :43055645

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 56/2025-26 interconnection work in various schemes under sub. division kishangarh renwal. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc

State Government

CTN :43055648

15 Dec, 2025 6.00 Lacs

Jobner - Rajasthan

Tender For 55/2025-26 interconnection work in various schemes under sub. div. sambhar lake. - providing, lowering, laying, aligning, fixing in position at all level/ depths ci class - b specials as per is : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenence as per technical specifications and as per direction of engineer. plain ended ci specials including tail piece, spigot end and socket end. up to 300 mm dia note : e/w to be measured and paid separately., providing and fixing of flanged/ plain ended ms specials made from ms sheet strips of relevant is specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of engineer-in-charge. ms pipe specials upto 600mm dia (with minimum 5mm thickness sheet), earth work in excavation by mechanical means (hydraulic excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 mtr. including required all safety provisions etc.:, all kinds of soil, dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work., providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work., m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)., dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work., bituminous courses, granular courses, work of lnter connection in ac/pvc pipe lin

corporations/Associations/Others

CTN :43022584

23 Dec, 2025 NA

Puruliya - West Bengal

Tender For supply of wetting head tail piece. , make-indure, for 600mw, ash handling plant , aci reducer for ash slurry pump suction, model no-12/10 ff -ah, size: 450 x 300 nb , 450 x 250 nb aci reducer for ash slurry pump discharge

State Government

CTN :43022705

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri and d block mcd flat nand nagari. (re-invite) - supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri & d block mcd flat nand nagari by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :43022728

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1. - supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1 by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :-dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

Central Government/Public Sector

CTN :42999869

22 Dec, 2025 NA

Solapur - Maharashtra

Tender For supply of irrigation items c c - 63 mm cpvc pipe class ii quality , 63 mm cpvc coupler class ii quality , 63 mm pvc pipe 4 kg per cm2, class ii quality , 75 mm pvc pipe 4 kg per cm2, class ii quality , 90 mm pvc pipe 4 kg per cm2, class ii quality , 110 mm pvc pipe 6 kg per cm2, class ii quality , 63 mm pvc elbow class ii quality , 75 mm pvc elbow class ii quality , 90 mm pvc elbow class ii quality , 110 mm pvc elbow class ii quality , 63 mm pvc t bend class ii quality , 75 mm pvc t bend class ii quality , 63 mm pvc coupler class ii quality , 75 mm pvc coupler class ii quality , 90 mm pvc coupler class ii quality , 110 mm pvc coupler class ii quality , 63 mm pvc ball valve class ii quality , 75 mm pvc ball valve class ii quality , 90 mm pvc ball valve class ii quality , 110 mm pvc ball valve class ii quality , 63 mm flush valve class ii quality , 1. 0 liter pvc adhesive solution high quality, mnc product , 110 mm to 90 mm pvc reducer class ii quality , 90 mm to 75 mm pvc reducer class ii quality , 75 mm to 63 mm pvc reducer class ii quality , 110 mm tail piece class ii quality , 90 mm tail piece class ii quality , 75 mm tail piece class ii quality , 63 mm tail piece class ii quality , 110 mm end plate with nut bolts , 90 mm cast iron end plate with nut bolts , 75 mm cast iron end plate with nut bolts , 63 mm cast iron end plate with nut bolts , m seal good quality , hacksaw blades 300mm heavy duty, , teflon tape good quality , insulation tape good quality , 16 mm plane lateral class ii quality , 16 mm inline drip line with 1. 5 ft distance between 2 emitters class ii quality , 4 lph, pc dripper class ii quality brand only netafim , 16 mm joiner class ii quality , 16 mm lateral valve class ii quality , 16 mm t bend class ii quality , 16 mm gromet class ii quality , 16 mm take off class ii quality , 16 mm end cap class ii quality , goof plug class ii quality , punch for dripper fitting , hand drill for takeoff fitting ) /bid number: gem/2025/b/6952281 * /dated: 01-12-2025 & & / bid document1 / 31

corporations/Associations/Others

CTN :42954677

12 Dec, 2025 NA

Mandsaur - Madhya Pradesh

Tender For supply of pvc pipe fittings d d - 160 mm pvc tee , 160 mm tail piece , 160 mm d joint , 160 mm pvc end cap , solvent , 160 mm elbow , 160 mm coupler , 200 mm sluice valve , 160 mm sluice valve , 180 mm sluice valve , 110 mm sluice valve

CTN :42769046

08 Dec, 2025 2.03 Lacs

Balurghat - West Bengal

Tender For supply and transportation of plate flange and c.i combined tail piece for maintenance of different major rli schemes under balurghat-ii (a.m) sub-division under balurghat (a-m) division - supply and transportation of plate flange and c.i combined tail piece for maintenance of different major rli schemes under balurghat-ii (a.m) sub-division under balurghat (a-m) division (gr. sl. no.-3)

CTN :42769083

08 Dec, 2025 3.11 Lacs

Balurghat - West Bengal

Tender For supply and transportation of m.s plate flange, ball bearing 6307 , gland flange and c.i. combined tail piece required for maintenance of different major rli schemes under balurghat-i (a.m) sub.division under balurghat (a-m) division - supply and transportation of m.s plate flange, ball bearing 6307 , gland flange and c.i. combined tail piece required for maintenance of different major rli schemes under balurghat-i (a.m) sub.division under balurghat (a-m) division (gr. sl. no.-2)

CTN :42770016

08 Dec, 2025 2.06 Lacs

Balurghat - West Bengal

Tender For procurement of ss spindle with wedge and top cover of alfa-alfa valve and c. i tail piece for maintenance of different rli schemes under balurghat-ii (a.m) sub-division under balurghat (a-m) division - procurement of ss spindle with wedge & top cover of alfa-alfa valve and c. i tail piece for maintenance ofdifferent rli schemes under balurghat-ii (a.m) sub-division under balurghat (a-m) division (gr. sl. no.-2)

Hdpe Tee Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others