Latest head pump Tenders | Government head pump Tenders

State Government

CTN :43340681

12 Jan, 2026 70.00 Lacs

Wayanad - Kerala

Tender For ridf xxviii - lift irrigation projects in various padashekharams of wayanad district- procurement of submersible pumpsets, fittings, accessories, and related electrical works - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses. - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses., supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontally mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day night operation.the pump discharge capacity of 230 cubic metre /hour against duty point head of 42 mtrs, working head range 18 - 47m, discharge range 136 - 57 lps ,speed 1450rpm(n) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an additional iron grill for preventing foreign particles inside the inlet side of the pump casing., supply and erection of 60hp auto transformer starter (ats) with suitable incommer and contactors including 24 kvar capacitor with required indications ,metering and protections for single phasing ,overload, pump monitoring unit to protect from ingress, high temperature level etc enclosed in a closed panel board, supply and laying additional termination cable of 1.1kv 3.5 core 95sqmm aluminium conductor xlpe insulated ;steel armoured ug cable as per relevant is 7098 with support for cable, supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontzlly mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day nightoperation.the pump discharge capacity of 188 cubic metre /hour against duty point head of 35 mtrs,working head range 16 - 42m, discharge range 102 - 42 lps ,speed 1450 rpm(n) or nearer ,with 10meters of copper power cable and control cable,railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an addition

CTN :43420282

24 Jan, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of diaphragm -ss304l for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , jaw coupling for the shapotools make metering pump of model dp-20-hyd-26sd-epnm , suction valve -nrv for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , discharge valve -nrv for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , o ring set -all o rings for the shapotools make metering pump of model dp20-hyd-26-sd-epnm , oil seal set for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , gasket set for the shapotools make metering pump of model dp-20hyd-26-sd-epnm , crankshaft bearing for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , worm shaft bearing for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , circlip set for the shapotools make metering pump of model dp-20-hyd-26sd-epnm , spider for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , gland packing for the shapotools make metering pump of model dp-20-hyd-26sd-epnm , sealing chord for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , sealing ring gasket set for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , ball for nrv for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , tennon for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm , oil level sight with gasket for the shapotools make metering pump of model dp-20-hyd-26sd-epnm , oil filler plug with gasket for the shapotools make metering pump of model dp-20-hyd-26-sd-epnm ) /bid number: gem/2025/b/7011992 * /dated: 02-01-2026 & & / bid document1 / 18

CTN :43391217

12 Jan, 2026 5.24 Lacs

Ramgarh - Jharkhand

Tender For repairing of 02 nos. dsm4m, kirloskar make si no. snd/1 and snd/2, 500gpm 938ips), 60 mtr head pump installed at saunda filter plant for water supply under saunda-d colliery.

CTN :43394944

12 Jan, 2026 6.93 Crore

Yavatmal - Maharashtra

Tender For construction work of intake structure, trash rack , earth murum backfilling behind counterfort wall, protection wall and beautification of pump house premises, control room, metering room, road diversion, construction of earth retaining wall for darg

State Government

CTN :43393415

07 Jan, 2026 8.11 Lacs

Palwal - Haryana

Tender For electromagnetic diaphragm dozing metering pump including hypochlorite solution and maintenance of one year in various rural villages

CTN :43148784

03 Jan, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of spares-- head pump seal kit , hose , belt v alternater , hose feed pump to filter , cable hydraulic , hose hydraulic , relay , seal kit for gear pump , cabin cyl seal kit

CTN :43290651

05 Jan, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of assy sleeve cyl , steering mtd combination switch , cover assy , brg tapered coller , end steering tie rod , timing belt , ball socket head , pump assy fuel