Latest high level tank Tenders | Government high level tank Tenders

CTN :43831441

16 Feb, 2026 4.00 Lacs

Kamrup - Assam

Tender For bid to ras supply of tata spares c c - assy head lamp lh lumax , assy tail lamp lh , assy tail lamp rh , brake fluid reservoir , door lock front lh , hose , hose clip screw type , repair kit mechanical transmission , switch pressure , tank coolant vehicular , major repair kit for m-cyl , minor rep kit for clutch m-cyl consistin , assy wheel nut , repair kit for accessories wiper , fise link 8 , nipple grease button head 3-8 bsf , sheet cellular 25mm thick 2m x 1m , hose pipe to pump , hose for radiator to water pump , clamp for shaller

CTN :43966209

21 Feb, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of mt spares d d -cabin heating element , starter assy , flange , fan belt , handle regulator , assy pipe , ac filter , hose , bearing front wheel , tank water reserver , oil filter , r r unit , pad set , brake shoe , steering rack , linker , arm bush kit , ball joint kit , shocker mount , front mud fender , holder fr bumper , fog light assy , hose radiator , ac pipe , weather strip

State Government

CTN :43946728

17 Feb, 2026 35.85 Lacs

Hazaribag - Jharkhand

Tender For supply of spare parts of deep well hand pump india mark ii conforming to i.s 9301-1990 with latest amendment 2004 with latest amendment for spares of india mark ii respectively under d w and s division hazaribag for the year 2025-26 - spare parts of india mark-ii deep well hand pump conforming to is:15500 (part-ii)2004 to be procured only from approved manufacturers from approved manufactures from unicef approved qualifed supplier & after proper verification of offer sheet inspection certificate marketing & packing etc. as per unicef s standard norms, m12x1.75x40mm hexagonal bolt, m12x1.75 hexagonal nut, connecting rod 3m long with coupling & nut, chain with coupling, upper valve guide ii, upper valve assembly- ii, lower valve assembly-ii, pump head assembly with cover & bolt with third plate, handle assembly(g.i.), water tank im -ii, cylinder body with brass liner for im- ii with reducer cap, cylinder assembly complete set im-ii, reducer cap, plunger rod for im-ii, add 5% gst

Central Government/Public Sector

CTN :43948610

17 Feb, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - 98090800 scrap released residue light junk kachra m.s./rubber/plastic from different following items items:- light junk kachra scrap i.e.coach toilet doors,seat frames,bearth/seat frames, train lighting fittings,boxes, sidelamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali,fan guards, fan ribs, destinationboard, letter board,ms /ci signal base unit , loc, nut bolts and other hardwares,heavily damaged and corroded steel furniture such as locker,chairs,ms measuring cans, tins, racks, brake dust bin, ms pipe and cut pcs. of mspipes, rods , ms bars released from broken spring, wire/coil springs, rusted tin paint,thinner cans,ms rope wire,stands,damaged ms angles,chanels, flats pcs. of cable racks/laders ms brackets dust bin stands, tin fuse box,fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand,earthing patti, empty cable tray, fly catcher, galvanized sheets & their cut offs,plain/corrugated toughened sheets and its cut pcs. such as strips,patties, patra, rings, coils, boxes, rusty and broken ms plates and thir pcs, broken tank, ms brake control cover, patra, angle, small springs, pins, wire coil,rubbers,fibres,collapsible doors, shuters and gates and their parts/cut offs, chain,channel,grills, compound /bridge jali with or without frame, frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, ms/galvanised boxes, junction box,switch boxes, empty convertor, filters,rings,nut bolts,residual plastics,fibres,cans, pipe pin, gate m/c dismentled, liquid container,location boxes, jumper, jumperbox,ground connections , basket steel, water cane,material carring trolley,jali,panto pans, compressor spares, dust guard, air filters, filter covers, ms/gi duct and its parts,insulating armature of signal cable, ci/ms signal base unit, hand lamps, side lamps, signal lamps,hs lamp, heavily rusted/damaged/pressed drums of various sizes and their cut pcs etc.partially filled or coated with grease, paint other oil,paint/varnish tins empty/partially filled with paint and tins other drums of various capacity, hospital miscellaneousllaneous items, stretchers,broken umbrella, damaged, cattle guard, helmets,clamps, signal post,signal platform,signal base, ms/ gi wire/coil, jali, funnels,boxes, rusted and damaged iron bar pcs,wheels, desmantelled weighing machines parts/covers etc. ms pipe with or without ci attachment, electrodes, plates, rings, spares/parts /body of weighing machine,platform weighing machine and its parts, pressure switches and other switches,signal parts, location boxes and their cut parts and other ferrous miscellaneousllaneous scrap items with or without minor nf/ss/wooden/rubber/rexine attachments of sorts and sizes, broken and damaged, scrap release corroded reinforcement iron bars of various sizes ,broken and damaged,and other ferrous miscellaneousllaneousitems.excluding items: ., axles and axle pcs., wheel tyres,cam shafts, helical springs, bolster springs,plates,broken piecec of sunmica and ply st sleepers and other nf items. loading by purchaser. (custodian: dms/nf/mx).please note: lot is contaminated in high quantity of soil/mud hence only jcb loading is allowed along with soil/mud, bidders are advised to see lot physically, delivery will be made as on as it basis.confisticated lot no 0902230925,0903451225

State Government

CTN :43893153

27 Feb, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For supply of mt spares part i b b -m gypsy ignition sw starter , m gypsy door lock both side , m gypsy tail door lock , m gypsy radiator cap , m gypsy km cable , m gypsy fuel tank unit , m and m bolero camper clutch master cyl , m and m bolero clutch sleeve cyl , m and m bolero brake pad front , m and m bolero rear brake shoe liner , m and m bolero wheel cyl assy rear , m and m bolero wiper blade , m and m bolero outer door handle open r h , m and m bolero outer door handle open l h , m and m bolero door lock r h side , m and m bolero door lock l h side , m and m bolero oil filter , m and m bolero fuel filter , m and m bolero fan belt , tata winger head light assy both side , tata winger power steering filter , mpv km cable , mpv wiper blade , mpv gear lever end , mpv fuel tank unit , mpv excel pin , tata 407 bs vi rod spring shackle pin front , tata 407 bs vi rod spring shackle pin rear , tata 407 bs vi water separator sensor , tata 407 bs vi shocker bush , tata 407 bs vi balancing rod bush , tata 407 bs vi clutch master cyl assy , tata 407 bs vi clutch sleeve cyl assy , tata 407 bs vi wheel cyl assy , tata 407 bs vi brake shoe liner front , tata 407 bs vi brake shoe liner rear , tata 407 bs vi tie and rod end both side , tata 407 bs vi uj cross p shaft , tata 407 bs vi steering uj cross , head light bulb 12 v 60 55 wat , 12 v 21 wat double filament bulb , helogen bulb 12 v , helogen bulb 24 v , flex kwik , anabond , black ragzine , 12 v fog lap assy with bulb , 24 v fog lamp assy with bulb ) /bid number: gem/2026/b/7204492 * /dated: 06-02-2026 & & / bid document1 / 37

Central Government/Public Sector

CTN :43865422

26 Feb, 2026 NA

Bangalore - Karnataka

Tender For supply of spares for boilers c c - "spares and consumables for steamboilers and associated unitsfusible plug 25 mm ibr one piece design", fusible plug 20 mm ibr one piece design, globe valve cast steel size 6 inch class 300 with ibr certificate, globe valve cast steel size 4 inch class 300 with ibr certificate, globe valve cast steel size 1 inch class 150 with ibr certificate, boiler feed water pump horizantal multistage 5 point 5 kw, gas flow meter range 0 500 kg or hr size 3 inch with totalizer and panel assembly, steam flow meter with necessary cabling and display size 3 inch, steam flow meter with necessary cabling and display size 4 inch, steam flow meter with necessary cabling and display size 6 inch, pressure reducing valve size 3 inch class 300 with ibr certificate, pressure reducing valve size 2 inch class 300 with ibr certificate, ms pipe b class 2 inch od 60 point 3mm thk 2 point 90mm length 6 meter, ms pipe b class 1 inch od 33 point 8mm thk 2 point 60mm length 6 meter, ms pipe b class half inch od 21 point 4mm thk 2mm length 6 meter, "i c wafer type nrv(non return valve size 2 inch grade ss304", "disc type nrv non return valve size 50mm grade ss304", brass foot valve 2 inch threaded, cpvc foot valve 3 inch threaded, steam trap td type size half inch, steam trap td type size 3 by 4 inch, steam trap td type size 1 inch, pressure gauge 4 inch range 0 to 15kg or cm2 with test certificate, pressure gauge 6 inch range 0 to 21kg or cm2 with test certificate, pressure gauge12 inch range 0 to 21kg or cm2 with test certificate, "sintex tank 10000 ltrs with 3 layerprotection", diaphragm valve size 2 inch, diaphragm size 2 inch, diaphragm size 1 and half inch, ph digital meter with sensor, temperature gauge rot type 4 inch range, tds digital meter, hardness testing kit, ss flange size 3 by 4 inch, ss flange size 1 inch, ss bolt size half inch length size 2 and half inch, ss nut size half inch, chain block 3 ton capacity with test certificate, graphite gland packing rope size 6 mm, graphite gland packing rope size 8 mm, graphitegland packing rope size 10 mm, graphitegland packing rope size 12 mm, graphite paste, metallic gasket, non metallic gasket, portable welding set 250 amps, conical washer, gauge glass sleeve size 3 by 4 inch, mobery top box assembly, "water controller mobery air brakeswitch", water pump cnp / grounfos 3 hp, gauge glass spindle standard, hawksaw frame size 12 inch with wooden handle, hss hacksaw blade size 12 inch x half inch, hot water pipe size 3 by 4 inch temp upto 200 deg centigrade length one meter, steam solenoid valve 1 inch, steam solenoid valve half inch, feed check valve 40mm class 150 with tc, "globe valve cast steel size 3 inch class 300 with ibr certificate", "sintex tank 1000 ltrs with 3 layersproection"

State Government

CTN :43732842

27 Feb, 2026 29.60 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 15 number of tanks, comprising of construction of barrage, in take structure, pumping machineries, 11/0.433 kv electrical sub station, transmission line rising main by lifting water from dandavathi river in soraba taluk shivamogga district including supply of spares parts & tools, operation & maintenance for five years after successful commissioning of the work for yadagoppa tank filling scheme works on turnkey basis

State Government

CTN :43668231

18 Feb, 2026 4.57 Crore

Sirsa - Haryana

Tender For chaharwala:- replacement of rcc pipe inlet channel, construction of one no. rcc s/s tank of size:- 35.00x120.00x2.44 mtr., one no. rcc high level tank of size:- 7x4.73x1.83 mtr., two nos. rcc filter bed of size 10.20x6.80 mtr., laying of head works pipe line, painting, distempering and snowcem, lighting arrangement, c.c. road and path, supplying and installation of pumping machinery, laying of distribution pipe line, restored and new connection, repair of existing water works structures all other works contingent thereto at chaharwala`

High Level Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

State Government