Latest hoist pulley Tenders | Government hoist pulley Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :42995865

22 Dec, 2025 3.29 Lacs

Panchkula - Haryana

Tender For list comprising of items from sr. no. 01 to 36 items - tool bit, elevators with link, sludger, casing pipe, drilling bit, tripod set, iron rod, sludger, sludger, iron rod, tripod set, tripod leg, nut & bolts, wire ripe pulley, nut & bolts, sludger, zin block, tasla, tripod set, zin block, wire rope, nut & bolts, sludger, sludger, tractor pullery acc (bylass tractor accessories for sr. no. 1 to 4), zero till, bed planter, reaper binder, tractor mounted aero blast power sprayer, pnematic planter, laser land leveler, lll battery charger set, chain pully block 2 tonne & 3 mtr., power tiller, iron panch, hammer

CTN :43027431

10 Dec, 2025 NA

Rajouri - Jammu And Kashmir

Tender For supply of various workshop/ store items in respect of ed-rajouri for the year 2025-26. - mnx 110 power contactor, 3-pole,110a,240/415v ac coil ,50/60hz, 3-phase, is/iec 60947-4-1, digital platform weighing scale 1000*1000mm upto 300kg, bdv oil testing machine 100kv motors isi marks, pallet trolley heavy duty isi marks (heavy duty), grinder single phase isi marks (heavy duty), turns countng meter for ht winding machine, ht coil frame for winding of ht coil capacity (25kva,63kva,100kva ,250kva), lt coil frame capacity for winding of lt coil (25kva,63kva,100kva ,250kva), motorised chain pulley block 1phase 5tonn, pipe wrench isi marks, gyser 50lts water storage capacity isi marks (jaquare,racold,havells), gyser 25lts water storage capacity isi marks (jaquare,racold,venas), heat pillor isi marks (belco,gopi,havells), heating blower (havells,orpet,bajaj), cartridge ribbon (tally genicom 6800/6600/6605 )

corporations/Associations/Others

CTN :43031700

08 Dec, 2025 58.0 Thousand

Delhi - Delhi

Tender For shifting of electrical equipment with associated material from rsu nangal raya to t.e. bldg. janak puri, delhi - dismantling of 2 nos. dg set 75 kva complete with batteries, exhaust pipes, cables, panel(inside canopy) from rsu nangal i/c dismantling of all cable, earthing & exhaust pipe connection etc. complete as reqd., dismantling of 3x8.75 tr ductable ac units from rsu nangal i/c dismantling of indoor & outdoor units, piping, cable tray, drain pipe and cable, connection etc. complete as reqd., dismantling of one 3x31.5 kva avr from rsu nangal i/c dismantling of all type cables, earthing connection etc. complete as reqd., dismantling of the following material from rsu nangal i/c dismantling of all types of cables/conduits, earthing connection etc. complete as reqd.: capacitor panel, avr by pass panel, l t panel, ac panel, fire panel, wall fans, fittings, phase reversal, change over switches, distribution boards, cable trays, cables, celing/wall fans, exhaust fans, and fire detectors etc complete as required., loading & unloading of dg sets with associate material i/c transportation from rsu nangal to t.e. bldg. janak puri by heavy labour, chain pulley/hydra etc as reqd., loading & unloading of 3x8.75 tr ductable ac units i/c indoor units & outdoor units, piping, cable tray and cable, etc. i/c transportation from rsu nangal to t.e. bldg. janak puri, by heavy labour,,chain pulley/hydra etc as reqd., loading & unloading of 3x31.5 kva avr with associated material etc.complete as reqd. i/c transportation from rsu nangal to t.e. bldg. janak puri, by heavy labour, chain pulley/hydra etc as reqd., shifting of the following material from rsu nangal i/c loading of all types of cables/conduits, earthing connections, capacitor panel, avr by pass panel, l t panel, ac panel, fire panel, wall fans, fittings, phase reversal, change over switches, distribution boards, cable trays, cables, celing/wall fans, exhaust fans, and fire detectors etc. unloading at janak puri bldg., and location as per the directions of engineer-in-charge. note: 1) the agency has to prepare a detailed inventory of all items to be dismantled i/c quantity before dismantling and shifting to other site and submit it to the engineer-in-charge for taking gate pass. 2) the agency is fully responsible for any misplaced/short material receipt from rsu site and suitable recovery will be made for any such item. 3) the cables will be rolled into loops and approximate length should be mentioned in inventory. 4) the dismantled items alongwith inventory will be handed over to engineer-in-charge, after shifting the material at site.

CTN :43046160

10 Dec, 2025 89.00 Lacs

Multi City - Jammu And Kashmir

Tender For lis lethpora - supply, installation, testing & commissioning of 02 pumping units, allied civil works including foundation works, submersible pump for priming, 3-ton travelling crane with chain pulley block, operators cabin and allied electro-mechanical works. ---------- estt. 89.00 lacs

Central Government/Public Sector

CTN :42792149

11 Dec, 2025 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of fuel and ash handling system spares - 3/4 inch rotary joint with hose pipe , flexible chain coupling , ta series gear box , belt , drive v pulley , driven v pulley , v-belt , fennar make , head pulley bearing , bucket , m series gear box , drive sprocket , 3/4 inch , driven sprocket , 3/4 inch , driven chain , 3/4 inch simplex , only rotor , m series gear box , drive sprocket , 3/8 inch , driven sprocket , 3/8 inch , drive chain , 3/8 inch simplex , only rotor , as series gearbox ratio 68 , drive sprocet , 1 inch , driven sprocet , 1inch , drive chain , 1inchsimplex , as series gearbox ratio 68 , drive & driven sprocket , 1 inch , drive chain , 1 inch simplex , mounting springs- 10thk , 160long , ta series gear box , ratio - 25 , belt , drive v pulley , 28 boar , , driven v pulley , 24 boar , , v-belt , , carrying idler-pipe , return idler- pipe , impact idler- , guide roller , bearing with housing , , v pulley 350pcd , stnd , v pulley 180 pcd , stnd , hammer plate , as series gear box , ratio- 42 , drive sprocket , 1.5inch , driven sprocket , 1.5inch , drive chain 1.5 inch simplex , belt , head pulley bearing , bucket , as series gear box , ratio - 68 , drive sprocket , 1inch , driven sprocket , 1inch , drive chain , 1inch simplex , drive sprocket , 1.5inch , driven sprocket , 1.5inch , drive chain 1.5inch simplex , worm type gear box , amg series gear box , drive sprocet , 1inch , stirrer- amf gearbox , stirrer- coupling flexible chain , ta series gearbox ratio 25 , as series gearbox ratio 68 flange mount , driven sprocet , 1inch , drive chain , 1inch simplex

CTN :42951381

06 Dec, 2025 1.48 Lacs

Calcutta - West Bengal

Tender For bid to ras providing of repair and overhauling service - piston air compressor, air dryer and chain pulley; unbranded; no; buyer premises

Central Government/Public Sector

CTN :43017096

12 Dec, 2025 44.5 Thousand

Santaldih - West Bengal

Tender For repairing unserviceable chain pulley block 2 mt capacity 02 nos. and 03 mt capacity 06 nos. at bhojudih coal washery.

State Government

CTN :42880233

08 Dec, 2025 99.68 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation divisions haveri and sirsi coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading - sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), chain pulley block 2 ton capacity, bolt cutter - 24inches (rubber grip handle, hardened alloy steel jaws & center cut jaw configuration with max cutting capacity 12 mm, ttubular telescopic tree pruner, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, telescopic ladder aluminium 6 m height, grounding sticks extendable upto 18 ft, frp telescopic discharge rod 16 ft, protective eye wear for safety with integral hands free led lighting, telescopic earthing rod, sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), insulated gos operating handle/rod for redesigned & modified gos, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, safety belt, minimum 2 m rope length, hi visibility reflective rain wear, hi visibility reflective jacket, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest

State Government

CTN :42880234

08 Dec, 2025 96.35 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation division vijaypur and rt division bagalkot coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading. - digital tong tester, ac clamp meter-200ma to 200a,accuracy rate - 0.01 to 0.1 a, lcr meter, display, phase sequence meter, measure the phase sequence (r,y,b) & open phase condition through led and buzzer., tool box with accessories-high quality tool box with tools like nut drivers, allen keys, screw driver set, heavy duty grip plier with nose plier, wire cutter, tester electrician wire stripper., multimeter,, tong tester, hack saw frames +b185, double end spanner 12 nos. per set, tube spanners 12 nos. per set, ring spanners 12 nos. per set, insulation tester (megger) 500 v, insulation tester (megger) 2.5 kv - 5 kv, frp telescopic discharge rod10 ft, high voltage detector, hand operated crimping tool 25 sqmm to 400 sqmm, frp wall extension ladder, open pulley capacity 2 ton, double pulleycapacity 3ton, ttubular telescopic tree pruner, bolt cutter - 24inches (rubber grip handle, hardened alloy steel jaws & center cut jaw configuration with max cutting capacity 12 mm, rubber hand gloves 11 kv, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, telescopic earthing rod, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), xerox machine, polypropyline rope of 26 mm dia in kg, multimeter electronic type, clamp meter, ac leakage clamp meter (ma) (dcm 10 a), head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, frp telescopic discharge rod 16 ft, safety belt, minimum 2 m rope length, protective eye wear for safety with integral hands free led lighting, hi visibility reflective rain wear, hi visibility reflective jacket, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest

Hoist Pulley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government