Web Analytics Made Easy - StatCounter

Holder Plate Tenders

Get complete information related to latest Holder Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Holder Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Holder Plate Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :38212000 Due date: 22 Jan, 202522 Jan, 2025 NA
Tender For bid to ras bid to ras corrigendum : tender for supply of air duct panels - end panel assy , supply panel plate assy-a , supply panel plate assy-b , upper panel -c , upper panel -d , side panel-b , side end panel -b , end panel -c , duct panel , side supply panel -b , side supply panel -c , split bracket- a , split bracket- b , split bracket- c , split duct panel -b , split duct panel -e , split duct panel -f , bottom panel , side end panel -a , split duct panel-a , split duct panel-c , split duct panel-d , side supply panel assy -a , side panel , side panel , upper panel -booster , split duct panel-b , upper panel-b , upper panel -e (as drawn) , upper panel -e (opp hand drawn) , side panel-c (as drawn) , side panel-c (opp hand drawn) , middle upper panel-a (as drawn) , middle upper panel-a (opp hand drawn) , middle upper panel-b (as drawn) , middle upper panel-b (opp hand drawn) , middle upper panel-c (as drawn) , middle upper panel-c (opp hand drawn) , middle upper panel-d (as drawn) , middle upper panel-d (opp hand drawn) , middle upper panel-e (as drawn) , middle upper panel-e (opp hand drawn) , middle upper panel-g (as drawn) , middle upper panel-g (opp hand drawn) , middle upper panel-h (as drawn) , middle upper panel-h (opp hand drawn) , middle upper panel-i (as drawn) , middle upper panel-i (opp hand drawn) , upper panel -a (as drawn) , upper panel -a (opp hand drawn) , side panel -a (as drawn) , side panel -a (opp hand drawn) , middle upper panel-f (as drawn) , middle upper panel-f (opp hand drawn) , upper panel (as drawn) , upper panel (opp hand drawn) , upper panel-g (as drawn) , upper panel-g (opp hand drawn) , front end panel (as drawn) , front end panel (opp hand drawn)

CTN :38988675 Due date: 07 Feb, 202507 Feb, 2025 NA
Tender For supply of layer 3 core switch , router , layer2 access switch 24 port poe , wireless lan controller on premise or cloud , sfp optics 10gbase module , 1g sfp , 1000base t sfp transceiver module for category 5 copper wire , indoor high end wireless access points , nms managed lan and wireless infra structure centrally , next generation firewall with 5year subscription with 500 users , next generation firewall with 5year subscription with 1000 users , ip pbx system with 100 sip licenses supply integration commissioning , ip phones supply integration commissioning , 5kva online ups with 2 hours backup supply integration commissioning , 24 port cat 6 patch panel with cable manager loaded utp 23a , io with face plate and backbox cat6 utp 23awg supply integration commissioning , j45 connectors cat6 utp 23awg supply integration commissioning , utp 23awg cat 6a cable box 305m supply integration commissioning , 0.5 meter utp 23awg cat 6 patch cord supply integration commissioning , 3mts utp 23awg cat6 patch cord supply integration commissioning , 5 metered utp cat 6 patch cord utp 23awg supply integration commissioning , 6f optical fiber cable steel single mode , fiber patch panel fiber distribution box 1u rack mount loaded , optical fiber patch cable 2 meters duplex single mode lc lc , optical fiber pig tails 1 meter lc , 42u rack with all accessories , 12u rack with all accessories , pvc conduit 25mm , display unit 55 inches , installation of indoor wireless access point , installation and configuration of core switch , installation and configuration of l2 access switch , installation and configuration of wlan controller , installation and configuration of nms server , installation and punching of 24 port patch panel with cable manager , laying of utp cat 6 23awg cable through conduit above surface , installation of information outlet cat 6 face plate smb and io , laying and fixing of conduit , installation and commissioning of 5 kva ups , installation of 42u rack 800 x 1000 mm , installation of information outlet cat 6 utp 23awg , installation of 12u rack with all accessories , lump sum of all electrical work 4sqmm core copper cable with electric dual port combined 16amp socket at each rack , underground laying of optical fiber cable with 40mm plb hdpe duct, minimum of 1 meter of depth 2 ofcs one for future use , manpower for 2 year to manage the network

Central Government / Public Sector

CTN :38959990 Due date: 07 Feb, 202507 Feb, 2025 NA
Tender For supply of set of plates for single duct leather bellows of wag9/wap7 locos. set details as follows. 1) modified bellow bottom plate as per clw drg.no.1209-01.418-032 alt-'0' - qty/set - 01 no/set. 2) m odified bellow bottom plate as per clw drg.no. 1209-01.418-031 alt-'1' - qty/set - 01 no/set. 3) modif ied plate flange tm inlet as per clw drg.no. 1209-01.418-026 alt-'1' - qty/set - 02nos/set. [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38961289 Due date: 22 Jan, 202522 Jan, 2025 NA
Tender For supply of manganese steel liner for nose pad (spring holder plate) for wap4/wag7 l ocomotives as per drg.no.sr.dee/rs/ed/mech-45 alt.2. item -3; material: maganese steel a s per is.276-2000 (v th revision or latest) grade .i [ warranty period: 30 months after the dat e of delivery ]

Central Government/Public Sector

CTN :38555381 Due date: 20 Jan, 202520 Jan, 2025 2.25 Lacs
Tender For corrigendum : tender for supply of electrical items as per attached document - meco make electrical clamp meter , 1200a ac/dc true rms , 2.5sq mm multi strand copper 3core wire , 2.5sq mm red color wire , 2.5sq mm black color wire , 1.5sq mm black color wire , 1.5sq mm red color wire , pla realy 230 acv 10a , pla realy holder , 16 a single pole mcb , 20 a two pole mcb , 32 a three pole mcb , pin led 4 pin photon ultra 18watt led pl-l 220-240v av 50 by 50xz865 , 1850lm , 2g11 , 40 watt , 4 feet led tube light , allen cooper 11719 popcorn mould electrical safety shoes with steel toe size 8 of 3 pair size 11 of 2 pair , insulation tap r , y , b , g and black.( 5 colors) each12 nos , taparia make 1621-8 lineman cutting plier , taparia make tester , 8 model pvc box compatible to roma switches , 8 model pvc plate compatible to roma switches , 6 model pvc box compatible to roma switches , 6 model pvc plate compatible to roma switches , 4 model pvc box , 4 model pvc plate compatible to roma switches , roma 6 amps switch , roma 6 amps socket , roma 16 amps switch , roma 16 amps socket , roma 32 dp switch , anchor roma 6a 3pin top , anchor roma 16a 3pin top , roma dummy switch , roma fan regulator switch type , roma fan regulator socket type , holder plate (chekke) , holder plate dummy (chekke) , 22 mm 220 v ac panel indicator light pilot lamp r , y , b color each 20 numbers , rexnord make panel board cooling fan 6 inch /230v ac , rexnord make cooling fan rec-21725 a2 vac 230 hz50/60 , 6a 6 socket multi spike buster , street light 100 watts , 9watts led bulb , safety gloves electrical purpose

CTN :38680628 Due date: 15 Feb, 202515 Feb, 2025 4.42 Crore
Tender For corrigendum : tender for supply of main engine spares for opvs - o ring , o ks 240 copaslip-250 gm upto 1100degc , oks 200-molykote , injector nozzle assembly , valve exhaust , set bolt m12x1.75x130-8.8 , nut for speed set screw , circlip , washer copper , washer copper , worm drive hose clip (30mm) , ball , tappet roller , gasket for glacier filter gf600-11 , serrated bush , joint , locking wire imm dia l 1 mtr , joint , dia 184x240xep.2 , joint , injector assembly , couping flex mast 10011-4 , elastic mountings tsc t140/70 d , injector tappet , gasket , sleeve dn 100 , pn 16 , barrel plunger assembly- 23 dia- grad , plunger spring , shim injection , o ring 15x204 viton (20209) , non return valve for compresse , seal kit (fw thermo valve for naval opv) , locking plate , hex headed screw , locking plate , cyclam seal assy , bush , cam shaft nut , o-ring an 49 , nse6.5 , 60c7 , indicator cock assembly , o ring gf 600 filt(no 2091p) , solenoid over speed air , nitrile cord , bush (bar) , o ring , loctite 549 , bolt , bolt , o-ring , nse-6.5 an80 , 60c7 , tappet , outside spring , spring , copper washer 8x22x1.5 , o ring , gasket for injector , serrated pin , o ring d1.8 , di37.4 , nse6.531 , 21a7 , screw set , o ring , flexible sealing joint , o ring , oval joint , bolt banjo , intermediate pinion , bush bearing , conditional actuator safeties card , supply card 24 vdc/24 vdc , solenoid valve nc , set of gaskets for hyd motor (mh-114a) , stud-m12x1.75x60-8.8 , lub oil stand by pump suction pressure gauge76 to 1 kgcm , copper joint , pressure gauge 0-60 bar , speed sensor 19050 , cup plug , exhaust manifold , exhaust manifold duct , flexmast coupl(pipe-88.9mm-o.d) , fuel feed pump balmo , bearing bush , o ring idp 038 x 2u , mechanical seal , non return valve , dn150 , pn16 , rk 86a , sleeve dn65 , pn16 , set of gaskets for lub oil filter , clogging indicator icf 30 el5 , injection pump roller , governor pga 12 , oil level contact type 20007 , joint for balmo fuel feed pump , duplex fuel filter , control terminals , sensor for bearing temp , fuel feed pump-cw engine , pressure transmitter p5r-6bar-4-20-1/2-pe , magnetic pick up for turbocharger , relay 4no-nc 24v dc , 4no-nc , 24v dc relay socket , cam shaft stud , hyloner paste , cylinder head gasket , plug , snap ring , bush viton , air starting valve (cyl.head) , exp. bellow , hex headed screw , locking plate , metafarm bush bp25-16/20x20 , bs ring-bsb d12 nse6.51 20a8 , filter particle detect , filter ing element for particle detecting filt , o ring , pressure gauge forbes marsh 100ss , ss316 0-4 bar glyf fil , relay 24 vcc (k81 , k82 , k83 , k86 , k95 , k100 , k101) , relay 24 vcc temporised (k105) , threshold temperature (msa) , actuator safeties card (acs) , filters (10) , overspeed detection card(svae) , threshold card (seuil) , bearing safeties regroupment card (rsp) , plug female 11 pin , plug male 11 pin , plug female 11 pin , logic unit - tempo(timer) , (14) , o ring - exh. valve guide-60 c7 , id18x2.5

Central Government/Public Sector

CTN :38912033 Due date: 31 Jan, 202531 Jan, 2025 NA
Tender For supply of spring holder plate assembly fabricated design to drg. no. sr dee/rs/ed/mech-45. alt. 2 item 1, 2 and 3. material: for item 3, mn steel as per is 276-2000 (vth revision or latest) grade-1. [ warranty period: 30 months after the date of delivery ]

CTN :38864903 Due date: 23 Jan, 202523 Jan, 2025 NA
Tender For supply of 6 mm. thick m.s. plate for unit i & iii airpreheater and flue gas duct, as per is 2062 note :1. d.d. towards postal charges for obtaining enquiry by post shall be drawn in favour of se/p&a/ttps payable at tirunelveli.2. prospective bidders may get the specification free of cost by down loading from websites. tnpgcl www.tangedco.gov.innic https://tntenders.gov.in/nicgep/apptender opening (electronically) :o/o. the superintending engineer/p&a/ttps tuticorin.(executive engineer/mm/ttps)

corporations/Associations/Others

CTN :38890852 Due date: 23 Jan, 202523 Jan, 2025 NA
Tender For splitter plate assembly for flue gas duct

Central Government/Public Sector

CTN :38878105 Due date: 30 Jan, 202530 Jan, 2025 NA
Tender For provision of power supply at proposed isolation bay near 05 and 23 end of runway at rupsi airport-1 supplying of following size of 1.1kv grade multistrand aluminium conductor xlpe insulated pvc sheathed armoured power cable (as per is: 7098:1988 with upto date amendments) complete as required. (i) 3.5 core, 300 sqmm. meter 200 (ii) 3.5 core, 95 sqmm. meter 1800 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (i) above 185 sq. mm and upto 400 sq. mm meter 146 (ii) above 35 sq. mm and upto 95 sq. mm meter 1755 3 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal/ hdpe pipe as required. (i) above 185 sq. mm and upto 400 sq. mm meter 24 (ii) above 35 sq. mm and upto 95 sq. mm meter 45 4 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required: (i) above 185 sq. mm and upto 400 sq. mm meter 30 5 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required: (i) 3 x 95 sq. mm (45mm) set 2 (ii) 3 x 400 sq. mm (82mm) set 2 6 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930. part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. od 200 mm dia meter 69 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double, door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy, fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming &, outgoing cables including supply & fixing the following items and interconnections, wiring with suitable size, wires/cables and including all civil works like excavation, pcc, brick work pedestal, plastering, refilling etc. and, as per specifications as required. incomer: 250a 4p 36ka tm mccb with ol/sc protection-2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, (iii) 230v uv coil-2 nos, (iv) 1co aux +tac- 2 nos, (v) indicating lamp on , off, trip 230v ac - 6 nos, (vi) phase indicating lamp r , y, b , 230v ac- 6 nos, (vii) 6a , mcb ,sp 10ka- 2 nos, (viii) 250/5, 15va, cl-1, c.t - 6 nos, (ix) 1ph digital volmeter , 230v ac - 2 nos, (x) voltmeter selector switch- 6 nos, (xi) 1ph digital ammeter , 230v ac -2 nos, (xii) ammeter selector switch- 2 nos, (xiii) 2no+2nc auxiliary contactor 220v ac- 2 nos, buscoupler:, 250a 4p 36ka tm mccb with ol/sc protection - 1 no, (i) spreader-1 no, (ii) extended rotary handle- 1 no, (iii) 230v uv coil-1 no, (iv) 1co aux +tac- 1 no, set 1, (v) indicating lamp on , off, trip 230v ac - 3 nos, (vi) 2no+2nc auxiliary contactor 220v ac- 3 nos, outgoing:, 160a 4p 36ka tm mccb with ol/sc protection( active + standby) - 2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, outgoing:, 63a 4p 36ka tm mccb with ol/sc protection- 2 nos, (i) extended rotary handle- 2 nos, outgoing:, 32a 4p 36ka tm mccb with ol/sc protection- 1 no, (i) extended rotary handle- 1 no, others:, 3pin plug & socket- 1 no, 8 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming & outgoing cables including supp
 Loading, Please wait...

Connect us via What's Up