Latest holding device Tenders | Government holding device Tenders

State Government

CTN :41530364

29 Sep, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of various lifting tools tackles at stage-ii,wtps. - chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, chain pulley block cap-5 ton heavy weight, chack brand or equivalant adjustable geared type travelling trolly, capacity: 5.0 tons; lift-12 mtrs., polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 75mm x 3t x 3mtr x yellow, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, motorised chain pulley block, capacity : 05 ton, motorised chain pulley block, capacity : 03 ton, chain pulley block capacity 10 ton, lift : 6.0 m., chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-1ton x15 mtr lift, bolt cutter length-450 mm, drill machine : vtp 18, 18 mm 2 speed, 640w, 28600/pm, 17800/pm, 0 - 1050 rpm,2.3 kg., bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), pipe vice no.6 size 12 mm to 150 mm, bearing puller , 8 inch , 3 legs, bearing puller , 3 inch , 3 legs, bearing puller set 3 jaw,size 6", grease gun, rechargeble torch

CTN :41756032

15 Sep, 2025 NA

Multi City - Multi State

Tender For stability certification, safety audit and lifting tools and tackles testing at bpcl tatanagar depot

CTN :41759052

30 Sep, 2025 NA

Guna - Madhya Pradesh

Tender For tender for supply of proc of lifting tools and tackles c c - as per technical specification section-vi of the tender document line item 1 , as per technical specification section-vi of the tender document line item 2 , as per technical specification section-vi of the tender document line item 3 , as per technical specification section-vi of the tender document line item 4 , as per technical specification section-vi of the tender document line item 5 , as per technical specification section-vi of the tender document line item 6 , as per technical specification section-vi of the tender document line item 7 , as per technical specification section-vi of the tender document line item 8 , as per technical specification section-vi of the tender document line item 9 , as per technical specification section-vi of the tender document line item 10 , as per technical specification section-vi of the tender document line item 11 , as per technical specification section-vi of the tender document line item 12 , as per technical specification section-vi of the tender document line item 13 , as per technical specification section-vi of the tender document line item 14 , as per technical specification section-vi of the tender document line item 15 , as per technical specification section-vi of the tender document line item 16 , as per technical specification section-vi of the tender document line item 17 , as per technical specification section-vi of the tender document line item 18 , as per technical specification section-vi of the tender document line item 19 , as per technical specification section-vi of the tender document line item 20 , as per technical specification section-vi of the tender document line item 21 , as per technical specification section-vi of the tender document line item 22 , as per technical specification section-vi of the tender document line item 23 , as per technical specification section-vi of the tender document line item 24 , as per technical specification section-vi of the tender document line item 25 , as per technical specification section-vi of the tender document line item 26 , as per technical specification section-vi of the tender document line item 27 , as per technical specification section-vi of the tender document line item 28 , as per technical specification section-vi of the tender document line item 29 , as per technical specification section-vi of the tender document line item 30 , as per technical specification section-vi of the tender document line item 31 , as per technical specification section-vi of the tender document line item 32 , as per technical specification section-vi of the tender document line item 33 , as per technical specification section-vi of the tender document line item 34 , as per technical specification section-vi of the tender document line item 35 , as per technical specification section-vi of the tender document line item 36 , as per technical specification section-vi of the tender document line item 37 , as per technical specification section-vi of the tender document line item 38 , as per technical specification section-vi of the tender document line item 39 , as per technical specification section-vi of the tender document line item 40 , as per technical specification section-vi of the tender document line item 41 , as per technical specification section-vi of the tender document line item 42 , as per technical specification section-vi of the tender document line item 43 , as per technical specification section-vi of the tender document line item 44 , as per technical specification section-vi of the tender document line item 45 , as per technical specification section-vi of the tender document line item 46 , as per technical specification section-vi of the tender document line item 47 , as per technical specification section-vi of the tender document line item 48 , as per technical specification section-vi of the tender document line item 49 , as per technical specificati

Central Government/Public Sector

CTN :41777945

22 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For supply of removable lifting lugs for bwcp , temperature gauge for motor bwcp , blind flange for pump casing , gasketpump casing and blind flange mating , heat exchanger with mounting bracket , weld pad for temperature elements , complete stud tensioning kit , pump casing and transit assy for bwcp , motor and transit assy for bwcp , duplex thermocouple for motor bwcp , duplex thermocouple pump casing bwcp , flow rator with amplifier , gaskets oringsmotor pump hb flanges , gaskets orings for bwcp , any other special toolsandtackles for bwcp , impeller puller for bwcp , thrust nut spanner for bwcp , thrust disc puller for bwcp , impeller nut spanner for bwcp , motor removable lifting lugs for bwcp , lifting eyes as necessary for bwcp , lifting plateeye bolts motor internal , any other special tools and tackles for bwcp , complete bwc pump with motor assembly , journal bearing for bwcp , thrust bearing for bwcp , casing wear rings for bwcp , impeller wear rings for bwcp , set of gaskets for bwcp , set of o rings for bwcp , motor heat exchanger assembly for bwcp , strainers for bwcp , cfd and fem analysis , hot type test , erection and commissioning for 14 man days per pump rate quoted should be per man day , traing to end user rate quoted should be per man day

corporations/Associations/Others

CTN :41380366

15 Sep, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : providing of custom bid for services - statutory examination, testing and certification of lifting tools & tackles, cranes, lifting machines and pressure vessels of mhs, dvc kalyaneshwari under section 28,29 and 31 of factories act 1948 read with rule 55 and 56 o..

Central Government And Public Sector

CTN :40507878

15 Sep, 2025 1.88 Lacs

Singtam - Sikkim

Tender For corrigendum : providing of custom bid for services - statutory testing & certification of lifting tools-tackles, pressure vessels and equipment under factory act, 1948 of power house

Central Government/Public Sector

CTN :40768519

11 Sep, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras corrigendum : supply of aaa787807656 drg: - rev: 00 fan holding device drg. no. -r7878-0765 , aaa787115037 hyd. scheme for bearing liner drg. no. r7871-1503 rev. -01 n. std: spt- j&f-op , aaa703975439 work piece changer drg. no. - r7039-7543 rev. -01

CTN :41025013

16 Sep, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of travelling crane for grse yard no 3041 orv project - travelling crane for scientific store , obs for 2 years exploitation , special tools and test equipment , commissioning spares , installation tools and materials , service , onboard training , docomentation hard copy , docomentation soft copy in pen drive , travelling crane for main hangar , crane and lifting gear for engine room

CTN :41731695

15 Sep, 2025 6.31 Lacs

Multi City - Karnataka

Tender For material supply for construction of sanjeevini shed in gouripura village under gouripura gram panchayat - ncearcc concrete cap 120 m dia, ncearcc ring 120 m dia, nceapvc pipe of 10kgcum110 mm, nceastone aggregatesingle size 10 mm nominal size, nceastone aggregatesingle size 20 mm nominal size, nceachlorinated polyvinyl chloride cpvc pipe 25 mm outer dia, ncea100mm s or p trap, nceaindian type water closet of size 580 mm of specified make with footrests, nceahandling loading and unloading 3 on material, ncealabour charges for lifting and placing in position and making connection at 7 on material, nceapolyenthylene water storage tank of specified capacity l, nceaadd brush putty sand paper at 2 on cost of paint, nceawater proofing cement paint, nceaadd brush putty sand paper roller at 5 on cost of paint, nceaplastic emulsion paint, nceaadd white cement for pointing at 2 on material, nceaborder tiles 30 10 cms, nceaglazed tiles 300450, nceaceramic tiles 30 30 cms, nceaenamel metal paint, nceapainter class i, nceaready mi primer paint ready mi red lead paint, nceaadd hom of welding and grinding machine 4 on material, nceawelder grade i, nceafitter class i, nceams flat, nceams rods, nceaunit cost as per the specification, nceamathinandi wood scantling, nceahom of machinaries for planing, nceaadd cutting and other wastage 5, nceamathinandi wood planks for panels 25 mm thick, nceapigment, nceacudddapah slab 25 cms thick, nceaadd providing and removing scaffolding at 3 on labour, nceasolid concrete blocks 40 10 20 cms400 nsqmm, nceaadd handling loading and unloading at 1 on material, nceamason class i with tools, nceasolid concrete block 40 15 20 cms 500 nsqmm, nceajungle wood runners and planks, nceacasurina poles 75 100 mm dia, nceaadd handling loading and unloading at 2 on material, nceacasurina poles 100 150 mm, nceasilver oak or euivalent planks 38 mm thick, nceatractor 40 hp, nceagravel 236 mmmurrum, nceaadd watering charges at 1 on labour, nceamier concrete sqmall used in culvert, nceaboulders, nceabond stone 20 20 45 cm, nceasize stone 20 20 25 cms, nceabinding wire, nceatmt bars fe 500, nceahom of vibrator 071 days, nceaplasticizer super plasticizer, nceaadd watering charges at 1 on material, nceamier concrete 1 cum capacity, nceaportland cement, nceacoarse sand zone iii, nceabroken stone aggregate 12 mm to 10 mm size, nceabroken stone aggregate 20 mm size, nceabroken stone aggregate 40 mm size

Central Government/Public Sector

CTN :41734943

27 Sep, 2025 38.54 Lacs

Lucknow - Uttar Pradesh

Tender For provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powder coated, lt p

Holding Device Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector