Latest hook bolt Tenders | Government hook bolt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38605327

23 Dec, 2024 NA

Multi City - Multi State

Tender For supply of set of stainless-steel hardware items consist of (i) hex. hd. bolt m12x1.75x45 lg as per drg . no. 1209-18.406-363-006, qty. 10 nos. (ii) hex. hd. bolt m12x1.75x25 lg as per drg. no. 1209-18.406-36 3-002, qty. 08 nos. (iii) hex. nut m12x1.75p as per drg. no. 1209-18.406-384-007, qty. 10 nos. specificatio n no. clw/ms/3/040 alt-15 [ warranty period: 72 months after the date of delivery ]

Central Government/Public Sector

CTN :38569640

03 Jan, 2025 NA

Hubli - Karnataka

Tender For supply of set of hexagonal head bolt 1) m10x50mm ms hexagonal head bolt and nut with 1 plain was her, 1 spring washer as per is:1363 or latest. qty 6000 sets 2) plain washer ms of size 10 mm as per is: 20 16 or latest. qty 10,200 nos 3) m6x40mm ss hexagonal head bolt and nut with1 plain washer as per a270 or latest. qty 4200 sets 4) m8x65mm ss hexagonal head bolt and nut with1 plain washer as per a270 or la test. qty 4200 sets 5) m12x50mm ms hexagonal head bolt with checknut with 1 plain washer, 1 spring wa sher as per is: 1363 or latest. qty 6000 sets [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38518480

31 Dec, 2024 NA

Srinagar - Jammu And Kashmir

Tender For supply of spare parts of br mahindra rakahak - 3rd top synchronizer assembly of br mahindra rakshak , needle cage bearing of br mahindra rakshak , first gear big of br mahindra rakshak , streering box assembly of br mahindra rakshak , gear oil 6 ltire , tie rod end set of br mahindra rakshak , leaf spring bush rubber of br mahindra rakshak , leaf spring bush steel of br mahindra rakshak , ball with spring set of br mahindra rakshak , gear box lock washer set of br mahindra rakshak , gear box gasket set of br mahindra rakshak , three bond tube of br mahindra rakshak , self solonide switch of br mahindra rakshak , self bendix lucas of br mahindra rakshak , self brush cards lucas of br mahindra rakshak , self brush set lucas of br mahindra rakshak , self bush lucas of br mahindra rakshak , parking light assembly left and right of br mahindra rakshak , side indicator assembly mudguard left and right of br mahindra rakshak , head light bulb hellogen of br mahindra rakshak , head light gypsy type left and right of br mahindra rakshak , fuse link , fuse 15 amp , lt wire 5 mm , tape roll black , alternator cut out lucas of br mahindra rakshak , alternator rectifier assembly lucas of br mahindra rakshak , alternator oil seal of br mahindra rakshak , alternator oil ring of br mahindra rakshak , horn semi roots set , bulb 1016 , bulb 1141 , bulb 67 , wiper blade left and right of br mahindra rakshak , wiper arm left and right of br mahindra rakshak , wiper link rod with gear set of br mahindra rakshak , back light asembly left and right of br mahindra rakshak , stop switch , reverse plug , pp switch , door lock bus type left and right of br mahindra rakshak , door inner handle bus type of br mahindra rakshak , door outer handle left side bus type of br mahindra rakshak , door outer handle with key bus type of br mahindra rakshak , door hings of br mahindra rakshak , rouf top shocker of br mahindra rakshak , ms tin sheet 4 feet by 6 fett 18 guage , rear door hings upper and lower of br mahindra rakshak , ms rectangular pipe 6 feet by 1 feet 29kg , ms rectangular pipe 2 inch by 1 inch 14 kg , tvs bolt no 10 with nut , tvs bolt no 12 with nut , calcium carbide , ccm rods 500 gram , welding rods , cutting blade 4 inch , door beeding set of 3 pcs of br mahindra rakshak , front door carboard left and right of br mahindra rakshak , chinese screw , door press rubber set of br mahindra rakshak , chassis of br mahindra rakshak , foundation bolt with nut no 14 of br mahindra rakshak , body foundation of br mahindra rakshak , rectangle pipe 6 inch by 1 inch , body filler white , sanding paper blue no 80 , sanding paper blue no 180 , esdee steel primer , flap disc no 60 , deco surfacer grey , deco surfacer white , n c putty 1500 gram , water proof paper no 320 , water proof paper no 220 , milky white paint espa , nc thinner , tarpin oil , matt black espa , silver paint 200 gram , dhoti cloth , masking tape , news paper old 300 gram bid details/ 2 / 60

Central Government/Public Sector

CTN :38186563

18 Dec, 2024 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of cable tray support system boltable lot 2 for panki tps 1x660mw up - single channel c1 , double channel c2 , cantilever arm ca1 -220mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca2 370mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca4 750mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , c1 channel clamp cc1 - complete with all hardwares and accessories as per annexure-a of technical specification , c2 channel clamp cc2 - complete with all hardwares and accessories as per annexure-a of technical specification , angle fitting la1 - complete with all hardwares and accessories as per annexure-a of technical specification , z clamp for 100mm perforated tray tz1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp2 - complete with all hardwares and accessories as per annexure-a of technical specification , tray fixing clamp tc1 - complete with all hardwares and accessories as per annexure-a of technical specification , ms galvanized hardware 1nos m6x35mm long pan head bolt 1 nos m6 spring nut 1 nos m6 plain washer , ms galvanized hardware 1nos m12x35mm long pan head bolt 1 nos m12 spring nut 1 nos m12 plain washer and 1 nos m12 spring washer , ms galvanized hardware 1nos m6x25mm long hex head bolt 2 nos m6 plain washer and 1 nos m6 spring washer , ms galvanized hardware 1nos m12x35mm long hex head bolt 2 nos m12 plain washer and 1 nos m12 spring washer , anchor bolt m10 with nut and washer , anchor bolt m12 with nut and washer

Central Government / Public Sector

CTN :38567978

18 Dec, 2024 NA

Angul - Odisha

Tender For supply of hex. head bolt & nuts m 12 x 45 mm of product grade 'c' m.s. black is: 1363 (p art-i) 2002 (4th rev.) and is:1363 (part - 3) 1992 (3rd rev.) property class 4.6 for bolt and property class 4.0 for nut. [ warranty period: 30 months after the date of delivery ]

CTN :38518874

31 Dec, 2024 NA

Kangra - Himachal Pradesh

Tender For supply of lv7 itr beml 50-224-13 mud flap rh lot 2 to 4 , lv7 itr beml 5310-005013 washer flat steel od 170 x id 60 x 20thk , lv7 itr beml 50-243 gimbal pin l-272 lot 3 and 4 , lv7 itr beml 3110-003551 coller bearing od 146 x id 198 x thk 18 , lv7 itr beml 3120-000380 50-312 bush lot 1 to 5 , lv7 itr beml 50-213-41 steel wire rope 6mm dia 4700 long , lv7 itr beml 5310-004988 nut eye bolt a f 80 dia 55 8 tpt , lv7 itr beml 3120-000671 bushing sleeve ms od 125 x id 83 x thk , lv7 itr beml 5306-004715 centre pivot bolt forging 373 mm long , lv7 itr beml 4730-001157 bolt fluid assy 178 mm long 53 a f , lv7 itr beml 5340-003293 fork end , lv7 itr beml 3120-000377 bushing sleeve steel ht od 58 x id 50 , lv7 itr beml 3120-000674 bushing sleeve steel od 158 xid100 x 50 , lv7 itr beml 50-152 alt-4 thrust pad , lv7 itr beml 3120-000676 50-119-2 washer thrust bronze od146xid99xthk6 , lv7 itr beml 50-290 winching roller lot 3 and 4 , lv7 itr beml 50-641 cap assy lot 2 to 4 , lv7 itr beml 50-66-79 hex bolt m 12 x 30 is 1364 s4 6 , lv7 itr beml 50-17-31 hexagonal screw m12 x 30 , lv7 itr beml 9905-000283 red reflex reflector 80 mm is 3105-80 , lv7 itr beml 50-223-91 indicator light holder 24v 21w bulb , lv7 itr beml 4730-000927 nut union pipe 38 m-911030 , lv7 itr beml 5315-049794 pin cotter split , lv7 itr beml 5315- 049798 pin cotter split , lv7 itr beml 50-64-18 spring washer m14 b lot 1 , lv7 itr beml 50-223-1 cable 15 mtr 15 0.3 1.5mm 12 core

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38605384

13 Jan, 2025 NA

Kharagpur - West Bengal

Tender For supply of hex. head bolt & nut m16 x 75 mm product grade 'c', m.s. black.matl.& specn :is: 1363 (part - 1) / 2023 (6th rev.) or latest and is: 1363 (part - 3) / 2018 (5th. rev.) or latest , property class 4. 6 for bolt and property class 5 for nut. [ warranty period: 30 months after the date of delivery ]

CTN :38555917

01 Jan, 2025 NA

Bardhaman - West Bengal

Tender For supply of chain pulley block ms chain air siren fire fighting bucket bolt and nut - 10tonnne chain pulley block , ms chain,0.5 inch, with test certificate,load bearing capacity 5 tonne , electric operated air siren,230v,2km range , fire fighting bucket 9l capacity , ht bolt nut,10.9 grade,m30x150mm , ht fuse cartridge,hrc 160a,3.3kv , mccb,415v,4p,32a

Hook Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector