Latest hose clamp scrap Tenders | Government hose clamp scrap Tenders

CTN :43314087

07 Jan, 2026 10.95 Lacs

Jayal - Rajasthan

Tender For supply of laboratory items for govt college, jayal, nagaur-341023 - chemistry, hot air oven triple walled in construction with inner made of stainless steel & exterior of steel with powder coat finish. food grade silicon rubber gasket which acts as a perfect sealant. high density compressed 100 mm glass wool insulation between the walls to prevent heat dissipation. a fully insulated rigid door fitted with heavy duty hinges and ball catch locking system. temperature controlled by dual led display microprocessor based temperature controller & pt 100 sensors. heating elements are made of high grade nichrome wire and provided on the side walls of the chamber. air circulation by motorized blower placed on top of the oven. exhaust/ventilation provided on either sides. left & right sides of the inner chamber are duly perforated for proper air circulation & to maintain uniform temperature within the chamber. available with removable ss rod shelves 3 nos. temperature range: 5 c above ambient to 250 c. temperature accuracy: 0.5 c or better. working space 18 x 18 x 18 inch or capacity 95 liter. operates on 230 volts ac single phase 50 hz. safety feature: capillary type thermostat provided to take care of temperature overshoots, working space (wxdxh)inch: 14x14x14 capacity: 45 ltrs. watts: 1500 shelves: 2 nos., digital melting point apparatusmelting point apparatus with 4 digit, 7-segment led display is designed for accurate measurement of melting points and for checking the melting range of the solid samples. the apparatus consists of a silicon bath of about 200 ml capacity, covered with teflon cover with 3 holes fitted, with a special type of oil immersion heater having three holes for holding the capillaries, one for boiling point tube and one for the thermometer. the apparatus consists of in-built magnetic stirrer, an electronic controller with indicator for precisely adjusting the rate of heating of silicon oil-bath, an on/off switch, a pilot lamp, with magnifier, a glare free background illuminator, a high/low range temperature selector switch and digital temperature indicator with sensor extremely useful for pharmaceutical industry 4 digit 7-segment led display display 4 digit, 7-segment led display temperature 0 300 c resolution 0.1 c, sample amount fine powder properly dried at a temperature considerably below its melting point 4 6 mm high oil-bath silicon oil-bath beaker 200 ml capacity with teflon cover fitted with oil immersion heater. it has three holes for holding the capillaries, boiling point tube and thermometer stirrer speed controllable with front knob power 230 v 10%, 50 hz. ac dimensions 315 x 290 x 290 mm (l x b x h), analytical balanceinternal calibration (weigh sensor) to match the highest international standards. internal calibration fully automatic motorized internal built in weights calibration. perfect self auto calibration (psac) when the ambient temperature changes by a specific value or once a defined time interval has elapsed, it performs internal calibration. overload protection capacity tracker built into display for easily monitoring possible overloads. excellent readability high-contrast, backlit display 15mm digits size is exceptionally easy to read under any room lighting conditions. below weighing hook hook for weighing below the balance. automatic shut off for power saving mode, maximum capacity 220 gm minimum load 10mg readability 0.1 mg repeatability (sd) 0.1 mg linearity ( ) 0.2 mg, tare range (subtractive) 220 gm usp minimum weight 160 mg pan size (mm) 90 response time 2 - 3 sec. display alpha numeric backlite lcd display calibration motorised internal calibration units of measure gm, mg, ct, gn, mo, oz, dwt, t1t, t1h, t1s, mom, bat, ms operating temp. 18 to 30 c sensitivity drift. 2ppm (2 x 10 / c) -6 optional usb (windows direct communication). application modes pcs, % weighing, animal / dynamic weighing, check weighing, automatic density determination, formulation automatic st

Central Government / Public Sector

CTN :43402986

09 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of swivel coat hook (three pegs) as per drg.no. cc 65254,alt e.

Central Government/Public Sector

CTN :43405397

29 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of stainless steel swivel type coat hook (three pronged)

Central Government/Public Sector

CTN :43367826

06 Jan, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of double coat hook

CTN :43206566

06 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

CTN :43332044

05 Jan, 2026 NA

Jalandhar - Punjab

Tender For supply of hpl compact laminate panels 12-18 mm for partitions , hpl door panel with in use vacant lock , ss 304 hinges 3 nos with fasteners , ss top rail support and brackets , ss adjustable legs 100-150 mm , ss handle coat hook and accessories , ruber matting and bottom buffer strip , impact mirror , installation labour fabrication and fixing , transportation and handling

Hose Clamp Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector