Latest hose coupling Tenders | Government hose coupling Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

State Government

CTN :40003972

02 May, 2025 22.50 Lacs

Mahisagar - Gujarat

Tender For the work of supply, installations & commissioning of various size headers, pipes, bends & connection flanges of cooling water system at khep.

Central Government/Public Sector

CTN :40007503

22 Apr, 2025 NA

Amethi - Uttar Pradesh

Tender For works contract for fabrication and assembly of nb re joints and companion flanges at bhel fsip, jagdishpur under framework agreement.

Central Government/Public Sector

CTN :40000961

01 May, 2025 NA

Dahej - Gujarat

Tender For jp/b862-000-wc-mr-3010/12 - flanges for pdh pp plant with ethane and propane handling facilities project at dahej, gujarat

Central Government/Public Sector

CTN :39999346

16 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of nab flanges

CTN :40002905

28 Apr, 2025 4.09 Lacs

Narsapur - Andhra Pradesh

Tender For supply and delivery of head water works water supply and maintenance materials in narsapur municipality - supply and delivery of following water supply head water works maintanance materials including all cost and conveyenace and all materials and charges etc.,, 1) 110 mm c i valves , 300mm ci valve ss spindle rods, brass nuts (300mm ci valve ss spindle rods), 250mm ci valve ss spindle rods, brass nuts(250mm ci valve ss spindle rods ), 200mm ci valve ss spindle rods, brass nuts (200mm ci valve ss spindle rods), 150mm ci valve ss spindle rods, brass nuts( 150mm ci valve ss spindle rods), 110mm ci valve ss spindle rods, brass nuts (100mm ci valve ss spindle rods), copper sulfate , 1 inch brass ball valves, 3/4 inch brass valves, 1/2 inch brass valves, 12 mm packing rope, 8mm packing rope, 4 inch pvc foot valves, 3 inch pvc foot valves, 2.5 inch pvc foot valves, 2 inch pvc foot valves, 1 inch pvc foot valves, 4inch ms flanges with threds, 6 inch ci foot valve atta full leather 4 holes, 1 inch hose pipe roll heavy duty, 3/4 inch hose pipe roll heavy duty, taparia greez guns 445 cc, taparia wrench set 6mm to 32mm , taparia ring wrench set 6mm to 32mm , taparia bench wise 5 inch , taparia plier , bosch cutter 800watt, hacksaw frame , hacksaw double side blades, electrical gum tapes , kathulu , reku kodavallu , bleaching bags for cleaning, supply of 48" (1200mm) sweep star rated ceiling fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without regulator., makes: as per list of recommended brands. mat 03599 and ele5.1.3makes: crompton (hs plus/hs) / havells (es plus/ss390es) /orient energy star/halonix(zephyr)/polycab(synergy 50 isi) / g.m. (air wave premium)/bajaj-edge/arcline (glacier)., supply & delivery of 125a 3 pole mccb,25 ka mccb, adjustable, confirms to iec 60947-2 and is 13947-part 1 & 2, having breaking capacity . with thermal magnetic release panel mounted., makes: as per list of recommended brands as category i 125a 3 pole mccb,25 ka

CTN :40013072

25 Apr, 2025 NA

Mettur - Tamil Nadu

Tender For mtps ??i ?? tm ?? unit ??iii ?? transporting, lifting and reassembling of vent condenser tube nest, modification of 4? syphon line into 6? syphon line and providing 6? flanges in vent condenser by pass line during unit-iii 2025-26.

CTN :39992210

15 Apr, 2025 8.31 Lacs

Guntur - Andhra Pradesh

Tender For supply & delivery of leaks arresting materials in gorantla and nagaralu area div no.46,47 & 48 under guntur municipal corporation. - 200mm dia class 15 cid joints, 160mm dia class 15 cid joints, 100mm dia class 15 cid joints, 80mm dia class 15 cid joints, supply and delivery of 6mm thick rubber packing including taxes and conveyance etc complete as per ss, supply and delivery of bolts and nuts (1/2" to 1") including taxes and conveyance etc., complete, manufacture, supply and delivery of the following hdpe pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 160 mm dia hdpe pipe , 110 mm dia hdpe pipe , 90 mm dia hdpe pipe , manufacture, supply and delivery of hdpe specials including tranportation to anywhere in ap excluding excise duty sales tax and specials etc. complete , a) 160mm dia hdpe pipe end long necks, b) 160mm dia ms flanges , c) 160mm dia hdpe dummy , manufacture, supply and delivery of the following pvc pipe and spl of approved by the departmental authorities and including cost and conveyance of all materials and all type of labour charges for fabrication, painting etc., complete., 200 mm dia pvc pipe , 75 mm dia pvc pipe, 90 mm dia pvc pipe, 80 mm dia pvc coupling, supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)-ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation., 100mm dia sluice valve , 150mm dia sluice valve 80mm dia sluice valve

Central Government/Public Sector

CTN :40007506

15 Apr, 2025 NA

Trichy - Tamil Nadu

Tender For envof4378-small flanges machining

corporations/Associations/Others

CTN :40013951

25 Apr, 2025 NA

Mettur - Tamil Nadu

Tender For mtps i tm unit iii transporting lifting and reassembling of vent condenser tube nest modification of 4 syphon line into 6 syphon line and providing 6 flanges in vent condenser by pass line during unit iii 2025 26

Hose Coupling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others