Latest hose reel drum scrap Tenders | Government hose reel drum scrap Tenders

CTN :45117013

01 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply and installation of aerosol fire detection & suppression system cartridge minimum 10gm as per annexure g-1 of rdso specification no. rdso/pe/spec/ac/0192-2018 (rev.1) & rdso letter no:el/7.1.108/sbc/main dated:06.08.25. all necessary modification, back pieces and accessories required for installation of this item shall be within the scope of supplier. [ warranty period: 30 months after the date of delivery ]

CTN :45117016

01 Jun, 2026 NA

Sealdah - West Bengal

Tender For supply and installation of aerosol fire detection and suppression system cartridge 100 gm + 100 gm , total 2 pieces as per technical requirement specified in annexure-g1 of rdso specification no-rdso/pe/spec/ac/0192-2018 (rev-1) or latest and rdso letter no. el/7.1.108/mssbc dt. 17.09.2021. thisshall be installed in the switch board cabinet of various types of lhb eog/hog ac coaches. all necessary modification, clamping arrangement and accessories required for installation of this item shall be with the scope of the supplier. note : [1 ]

CTN :42579205

03 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.) - schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.), polyster base round corner x-ray films (8" x 10") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (10" x 12") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (12" x 15") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, dental x-ray films intraoral periapcal the density values should blue base with base fog less than or equal to 0.20 & dmax not less than 3.10 the density values should be met at developer temperature 32 c to 35 c, liquid developer replenisher for automatic processor (starter solution, if recommended by the manufacturer, should also be supplied), ( price of item no. 5 and item no. 6 will be considered as a unit), liquid fixer hardner for automatic processor ( price of item no. 5 and item no. 6 will be considered as a unit), inj. meglumine diatrizoate sodium diatrizoate iodine content 365-375 mg/ml in 20 ml. ampoule/vial, pigtail angiography catheter with multiple side holes length 65 to 75 cm 5f, inj. gadolinium based contrast for mri for liver/liver specific (should provide details of compound being hepatobiliary specific), inj. gadolinium based contrast for mri for general use, inj. gadolinium based contrast for mri for angiography, disp lure lock syringes 3 ml. for glue injection, disp lure lock syringes 1 ml. for glue injection, x-ray folders laminated 250 gsm 14 1/2" x 17 ", dual pack 200 ml syringe with aspirator, "y" shaped coiled tube y-tube sterile, non-pyrogenic (minimum 300 psi & above) compatible with dual head pressure injector ( lf/medrad/ sea crown / spectra / apollo), extension "y" shaped coiled tubing for injector 150 cms. (-5 or +15cm) low pressure (minimum 300 psi & above), dual disposable syringes (60 to 65 ml each) with "y" or "t"shaped coiled tube connecting tubes small spike for contrast and large spike for saline compatible with mri injector (lf or medrad)., one way stopcock (high pressure), low pressure extension "y" or "t" shaped coiled tubing min. 150cms (-5 or +15 cms) with coiled connecting tubes & small spike for contrast & large spike for saline for medical mri injector., flavoured, ionic, water soluble, oral contrast iodine content 240-250 mg/ ml. in 30 ml, bernstein catheter 4 f 100 cm, bernstein catheter 5 f 100 cm, chiba needle 21 g 15 cms length, chiba needle 22 g 15 cms length, disposable c t scan pressure injector syringes (190 ml syringe + quick fill tube) for bayer medrad salient injector (toshiba / canon), extension "y" shaped coild tube adapter dual check valves (minimum psi 300 & above), nonionic iodixanol isoosmolar, 320 mg 50 ml, disposable mri syringes kit for 65/115 mr injector system 65 ml contrast syringes and 115 ml ns syringes with connecting tubing combo pack for spectris solaris medrad pressure injector, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 14 g & 10 cm in length, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 16 g & 10 cm in length, coil shape breast tissue marker with both front trigger & an alternate rear trigger, should be visible in ultrasound, mammography and mri, extension coiled tube with integr

CTN :45091457

28 May, 2026 NA

Liluah - West Bengal

Tender For supply of densified thermal bonded polyster blocks to rdso's specn no. c-k 607 rev.- 2 of december 2015 with amendment slip no.1 of august 2016 size:-(61x 560 x 1854)mm as per rcf's drg.no. lw61190, item no. -4, alt. a density 80 kg/m3 confirming to uic fire retardant properties. item required in block ( without groove & radius) as per dimension shelf life 24 months. [ warranty period: 30 months after the date of delivery ]

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government / Public Sector

CTN :45091014

26 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of 6 kg portable, stored -pressure type fire extinguisher with ss body, abc-type dry chemical powder without anti-theft mechanism for ac coaches to rcf drawing no. cc64181, item-1, alt-b and conforming to rcf specification no. mdts-46270, rev: 02 along with hanging brackets on fire extinguisher as per rcf drawing no. cc64262, item-2, alt-f.note: for hanging brackets on fes, l x w x h (26 x 28 x 10 mm) dimensional tolerance up to 10% may be permitted (item no.2 of rcf drawing no.cc64262 alt.-f). the above description shall be read along with the modification to clauses of specification no. mdts-46270, rev: 02 as specified in annexure-1. ]

Central Government / Public Sector

CTN :44707468

12 May, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of mitsubishi make gt spares - list of item(s) / work(s) as per tender documents, fuel nozzle,p/n gfnoz-1, heli coil,p/n-310qc67-724-4, 12 point bolt,p/n-5,dwg-310qc67-724, support,p/n-310qc67-724-8, seal,p/n:9,dwg-310qc67-724, hex.head bolt,p/n:10, dwg-310qc67-724, hex.head bolt,p/n:11,dwg-310qc67-724, hex.head bolt,p/n-310qc67-724-12, u-nut,p/n-13,dwg-310qc67-724, cover spacer,p/n:14,dwg-310qc67-724, bolt,p/n-36,dwg310qc64-292, washer,p/n:37,dwg:310qc64-292, pin,p/n:45,dwg:310qc64-292, combustion liner,p/n 4, drg 310qc54-600, adapter,p/n 5, drg 310qc54-600, gland,p/n 6, drg 310qc54-600, cross fire tube,p/n 8, drg 310qc54-600, cross fire tube,p/n 9, drg 310qc54-600, vortex gasket,p/n 16, drg 310qc54-600, vortex gasket,p/n 17, drg 310qc54-600, metal jackt gasket,p/n20,drg 310qc54-600, metal jackt gasket,p/n21,drg 310qc54-600, ring packing,dwg:310qc56-101,p/n:22, hex. head bolt,p/n 23, drg 310qc54-600, transition piece p/n-1,dwg. 310qc32-464, clamp p/n-2,dwg. no. 310qc32-464, shim(1.0t),p/n:3,dwg:310qc32-464, shim(1.5t),p/n:3,dwg:310qc32-464, side seal,p/n:4,dwg:310qc32-464, stopper,p/n:5,dwg:310qc32-464, stopper,p/n:6,dwg:310qc32-464, guide pin,p/n:8,dwg:310qc32-464, hex. head bolt,p/n:13,dwg:310qc32-464, hex. head bolt,p/n:14,dwg:310qc32-464, hex. head bolt,p/n:15,dwg:310qc32-464, lock plate,p/n:16,dwg:310qc32-464, lock plate,p/n:17,dwg:310qc32-464, lock plate,p/n:18,dwg:310qc32-464, lock plate,p/n:19,dwg:310qc32-464, heli coil,p/n:20,dwg:310qc32-464, heli coil,p/n:21,dwg:310qc32-464, heli coil,p/n:22,dwg:310qc32-464, 1st stage shroud p/n-7,dwg. 310pb44-454, 2nd stage shroud,p/n:8,dwg:310pb44-454, 3rd stage shroud,p/n-310pb44-454-9, lock pin,p/n:45,dwg:310pb44-454, lock pin,p/n:63,dwg:310pb44-454, heli coil,p/n:2,dwg:310pb44-454, guide dwg-310pb44-454 p/n:3, hex. head bolt dwg-310pb44-454 p/n:4, lock washer dwg-310pb44-454 p/n:5, lock washer dwg-310pb44-454 p/n:6, plug,p/n:38,dwg:310pb44-454, plug dwg-310pb44-454 p/n:39, plug,p/n:40,dwg:310pb44-454, plug rod,p/n:42,dwg:310pb44-454, plug plug dwg-310pb44-454 p/n:43, plug rod,p/n:44,dwg:310pb44-454, 12 point bolt,p/n:50,dwg:310pb44-454, 12 point nut,p/n:51,dwg:310pb44-454, reamer bolt,p/n:52,dwg:310pb44-454, reamer bolt,p/n:53,dwg:310pb44-454, stud bolt,p/n:54,dwg:310pb44-454, stud bolt,p/n:55,dwg:310pb44-454, plug,p/n:56,dwg:310pb44-454, coil spring,p/n:57,dwg:310pb44-454, plug,p/n:58,dwg:310pb44-454, plug rod,p/n:59,dwg:310pb44-454, plug rod,p/n-60,dwg-310pb44-454, hex. head bolt,p/n:64,dwg:310pb44-454, 12 point bolt,p/n:65,dwg:310pb44-454, 12 point nut,p/n:66,dwg:310pb44-454, 12 point bolt,p/n:67,dwg:310pb44-454, heli coil,p/n:68,dwg:310pb44-454, heli coil p/n-72,dwg. no. 310pb44-454, heli coil,p/n:73,dwg:310pb44-454, reamer bolt,p/n:8,dwg:310pb44-455, 12 point bolt,p/n:10,dwg:310pb44-455, self lock nut,p/n:16,dwg:310pb44-455, washer,p/n:23,dwg:310pb44-455, 12 point bolt,p/n:24,dwg:310pb44-455, packing,p/n:26,dwg:310pb44-455, packing,p/n:27,dwg:310pb44-455, lock washer,p/n:32,dwg:310pb44-455, lock washer,p/n 33,dwg 310pb44-455, lock washer,p/n:34,dwg:310pb44-455, hex. head bolt,p/n:36,dwg:310pb44-455, heli coil,p/n:38,dwg:310pb44-455, heli coil,p/n:40,dwg:310pb44-455, nut,p/n-a,310rb77-727, cap nut,p/n-b,310rb77-727, baffle,p/n-310pb44-455-6, baffle,p/n-310pb44-455-7, no.2 brng liner,p/n:2,dwg:310pb44-453, oil seal,p/n:3,dwg:310pb44-453, oil seal,p/n:4,dwg:310pb44-453, oil deflector,p/n:5,dwg:310pb44-453, shim,p/n:34,dwg:310pb44-453, shim,p/n:35,dwg:310pb44-453, reamer bolt,p/n:7,dwg:310pb44-453, 12 point nut,p/n:8,dwg:310pb44-453, 12 point bolt,p/n:9,dwg:310pb44-453, reamer bolt,p/n:10,dwg:310pb44-453, 12 point nut,p/n:11,dwg:310pb44-453, 12 point bolt,p/n:12,dwg:310pb44-453, 12 point bolt,p/n:13,dwg:310pb44-453, 12 point bolt,p/n:14,dwg:310pb44-453, 12 point bolt,p/n:15,dwg:310pb44-453, 12 point bolt,p/n:16,dwg:310pb44-453, pin,p/n:17,dwg:310pb44-453, pin,p/n:18,dwg:310pb44-453, pin,p/n:19,dwg:310pb44-453, plug,p/n-310pb44-453-24, plug,p/n-310pb44

Hose Reel Drum Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector