Latest hotmix material Tenders | Government hotmix material Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

corporations/Associations/Others

CTN :44927763

11 May, 2026 10.00 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : providing , supplying & laying wetmix at drainage line & water line exacavation area and labour work of laying hotmix material patch work at tp-1, 2 area and other area in ghatlodia ward north west zone. (a.r.c.)

CTN :44846247

27 Apr, 2026 NA

Kamrup - Assam

Tender For bid to ras bid to ras corrigendum : supply of capping of size 3 by 4 medium grade snow white make anchor or ssk or cona , switch piano 5 amp 230 volts flush type one way snow white make anchor or ssk or cona or isi equivalent , led tube light fittings 15 w 230 v box type 4 feet with crac body as per technical specification and drawing attached , screw full thread 9 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches or db make supreme or polycab or finolex or isi equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches or db make supreme or polycab or finolex or isi equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme or polycab or finolex or isi equivalent , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor or ssk or cona or isi equivalent , service bracket 40 mm dia gi tubing medium grade 1.5 mtr long make jindal or tata or kalinga or isi equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 or 1989 make birla gold or ambuja or ultratech or isi equivalent , coarse sand free from vegatative materials , coarse aggregate 20 mm graded , coarse aggrate 40 mm graded , hardcore 63 to 90 mm , mild steel framed work such as truss rafter purlines and ms plate make tata or sail or jsw or isi equivalent , mild steel bars size 6 to 8 mm dia conforming to is part i 1982 make tata or sail or jsw or isi equivalent , mild steel bars size 10 mm and above dia conforming to is 432 part i 1982 make tata or sail or jsw or isi equivalent , the pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550mpa of size 10 feet x 3 feet for roof and wall , the pre painted galvalume aluminium zinc coating gi based plain steel 0.50 mm thick an colour having a tensile strength 550mpa make unik or jindal or mectec , mild steel self drilling screw with washer size 3 inch isi marked 100 nos per pkt , anti corrosive red oxide zinc chromate primer confirming to is 5 to 2004 make asian or nerolac or equivalent , synthetic paint enamelled black confirming to is 5 to 2004 make berger or asian or nerolac or isi equivalent , painting brush 3 inch isi marked , ms nut and bolt of length 100 mm fully thread , ms nut and bolt of 0.45 m 12 mm dia nuts and washer for fdn bolt , iron welding rod confirming to is 814 to 2002 isi marked 3.15 mm thick 100 nos per pkt , ms binding wire

corporations/Associations/Others

CTN :44985718

04 May, 2026 29.99 Lacs

Ahmedabad - Gujarat

Tender For hotmix material laying for patchwork on erosion and excavationroad at ghodasar area and different road in vatva ward,southzone ahmedabad.(arc tender)

corporations/Associations/Others

CTN :44944925

29 Apr, 2026 8.29 Lacs

Ahmedabad - Gujarat

Tender For labour supply for hotmix material patch work by hand laying at jamfalwadi ,vakilwadi,new vastral area, jasodanagar area and other different places in ace-2 area of ramol hathijan ward in east zone.(part-02)

corporations/Associations/Others

CTN :44944927

29 Apr, 2026 8.29 Lacs

Ahmedabad - Gujarat

Tender For labour supply for hotmix material patch work by hand laying at jamfalwadi ,vakilwadi,new vastral area, jasodanagar area and other different places in ace-2 area of ramol hathijan ward in east zone.(part-01)

corporations/Associations/Others

CTN :44944929

29 Apr, 2026 8.27 Lacs

Ahmedabad - Gujarat

Tender For labour supply for hotmix material patch work by hand laying at hathijan village,vivekananad nagar, vinobabhave nagar, janiyapir, vinzol and other different places in ace-1 area of ramol hathijan ward in east zone.(part-02)

corporations/Associations/Others

CTN :44944930

29 Apr, 2026 8.26 Lacs

Ahmedabad - Gujarat

Tender For labour supply for hotmix material patch work by hand laying at hathijan village,vivekananad nagar, vinobabhave nagar, janiyapir, vinzol and other different places in ace-1 area of ramol hathijan ward in east zone.(part-01)

CTN :44938267

29 Apr, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of construction materials - cement opc 43 gde , sand , stone aggregate 12.5 mm graded , stone aggregate 20mm graded , stone aggregate 40mm graded , stone aggregate 63 mm , stone aggregate 63 mm to 100mm , rr stone , quick setting compound , brick bats stone aggregate 40 to 63mm , white cement , lime , bitumen 80 to100 grade for filling joints in plinth protection , bituminous filler board 8 inch x 4 inch , solid pcc blocks 400x200x200mm , black granite 25mm thick 2 x 0.5mtr , ms tmt bars 12mm dia , ms tmt bars 16mm dia , ms tmt bars 8mm dia

Hotmix Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors