Latest hr sheet Tenders | Government hr sheet Tenders

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

Central Government/Public Sector

CTN :43028979

24 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of steel plate : : -hr sheet 2mm , hr sheet 3 15 , ms plate 4mm , ms plate 6mm , hot rolled 6mm , chequred 8mm , ms plate 8mm , ms plate 10mm , chequred 10mm , ms plate 12mm , msplate12mm , ms plate 14mm , ms plate abr16mm , ms plate 16mm , ms plate 20mm , ms plate 25mm , ms plate 28mm , ms plate 32mm , ms plate 36mm , ms plate 40mm , ms plate 50mm , ms plate 70mm , ms plate 80mm , ms plate 100mm

State Government

CTN :43019455

17 Dec, 2025 34.11 Lacs

Raichur - Karnataka

Tender For procurement of structural steel for boiler & auxiliaries for bm-2 of rtps - ms chequered plate 1250x5000x6mm, chequred plate 8 mm, ms plate 3mm_, ms plate 12mm_, ms plate 10mm, ms plate 6mm, hr sheet 2.5mm, hr sheet 3.15 mm, ms flat 100mm x 6mm, ms flat 100x10 mm, ismb 150 x75 mm, ms angle (isma)_25x25x6, ms angle(isma) 25x25x3, ms angle (isma)110x110x10, ms angle (isma)_75x75x6, ms angle 40x40x5mm, ms round(solid) 12mm_, ms round (solid) 10mm, ms round(solid) 8mm, ms round (solid) 6mm_

State Government

CTN :42967712

11 Dec, 2025 7.38 Lacs

Raichur - Karnataka

Tender For procurement of steel required for maintenance of unit 5 to 8 of rtps - ms round(solid) 8mm, ms round (solid) 10mm, ms round (solid) 16mm, ms angle 50x50x6mm_, ms angle isma 75x75x6, ms channel ismc 100x50mm_, hr sheet 3.15 mm, ms plate 16 mm, ms plate 20mm conforming to is-2062 2006, ms chequered plate 1250x5000x6mm

State Government

CTN :42649204

08 Dec, 2025 23.46 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : manufacture & supply of steel flat products i.e. h.r. sheets, h.r. plates and hard plates to all thermal power stations of mppgcl for two years on rate contract basis. - hr sheet for atps, chachai, 2.00 mm, 3.15 mm, hr plate for atps, chachai, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 32 mm, 36 mm, 45 mm, hard plate (sail hard-1995 or equivalent) for atps, chachai, 10 mm, 12 mm, hr sheet for stps, sarni, 2.00 mm, 2.90 mm, 3.15 mm, hr plate for stps, sarni, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 25 mm, 32 mm, hard plate (sail hard-1995 or equivalent) for stps, sarni, 6 mm, 10 mm, 12 mm, 16 mm, 20 mm, hr sheet for sgtps, birsinghpur, 2.00 mm, 2.90 mm, 3.15 mm, hr plate for sgtps, birsinghpur, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 32 mm, 36 mm, 40 mm, 45 mm, hard plate (sail hard-1995 or equivalent) for sgtps, birsinghpur, 10 mm, 12 mm, 16 mm, 20 mm, hr sheet for sstpp, khandwa, 2.00 mm, 2.90 mm, 3.15 mm, hr plate for sstpp, khandwa, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 32 mm, 36 mm, 40 mm, 45 mm, hard plate (sail hard-1995 or equivalent) for sstpp, khandwa, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm

CTN :42895992

15 Dec, 2025 10.00 Lacs

Ujjain - Madhya Pradesh

Tender For supply of dual desk for government iti of ujjain zone - furniture, dual desk - overall dimensions:- l:-1054 x w980 x 760 mm ht. knock down class room dual desk is (plpb) edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top- injection moulded plpb edge. size:- 1054x450x18 mm thk. plpb.seat-injection moulded plpb edge. seat height :- 450 mm, seat size:- 1054x304x18mm thk. plpb. back injection moulded plpb edge. back size :- 1054x 154x18 mm thk. plpb. shelf - shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffener | mm thk crca. modesty-modesty 0.8 mm thk: crca sheet. square perforation. tie members- horizontal tie member 25x 25 x 1.6mm the. crca pipe. for rigid joint of frame structure threaded 4mm thick sleeve welded in tie members. round pipe & tie members joined together via notching in square pipe for matching of profile on round & square pipe in seat & back. footrest- footrest pressed formed crca section 1.5 mm thk. side frame -side frame section in bullnose edge taper, pressed formed 1mmthk. crca sheet welded with 25x50x1.2mm the tube. back rest pipe 25 x 1.6 mm thk. back rest upper mouth has been closed in metal cap shape with heat induction for avoiding sharp edges. cap & levellers - all in pipe caps are curved plpb material. provision for levellers in the cape 4 no.s of pvc grommet has been provided at bottom for preventing scratched on floor & product as well. construction: the product comes in knock down conditional for ease of transportation. finish - no sharp edges in the product. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface and product should look as per the photograph.

corporations/Associations/Others

CTN :42939335

08 Dec, 2025 NA

Bardhaman - West Bengal

Tender For tender for supply of procurement of structural steel materials d d - ms angles , 65x65x6 mm , ms angles , 50x50x6 mm , plate mill platessailhard 16mm125.6 , mill plate sail hard 20 mm , ismb 150 mm , m s channel , 100x50mm , hr sheet 3.15 mm , hr sheet is 1079 gro size 2.5 mm thk , ms angles , 75x75x6 mm , m.s. angles , size 90 x 90 x 6 mm , angle 90x90x6 , m s channel 250mm x 80mm , plate sail hard 12 mm

CTN :42755004

05 Dec, 2025 3.12 Crore

Bardhaman - West Bengal

Tender For supply of ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 8 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 10 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 12 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 20 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,ms plate, 25 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,chequered plate, 6 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2.5 mm,hr sheet, 2

Hr Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

corporations/Associations/Others