Latest ht gear repair Tenders | Government ht gear repair Tenders

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

Co-operative

CTN :40590432

18 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c i item on conversion and supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), chief engineer

CTN :40567990

23 Jun, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of overhauling of front axle and steering gear box , assy drive shaft lh and rh , assy crown wheel and pinion , differential spider , ball socket head assy , gasket front axle cover , supporting sleeve lh and rh , tapper roller bearing , coupling flange , axle shaft gear forged , sector shaft assy , seal kit turner cover consisting of 16 items , worm rack rhd , hydraulic reserver , coupling assy , seal o ring , gasket

CTN :40556718

21 Jun, 2025 NA

Amritsar - Punjab

Tender For supply of repair servicing to veh ba no 20c 108774n tata xenon - replacement of fuel filter , replacement of oil filter , replacement of air filter , filling of engine oil , filling of gear oil , replacement of gear oil , replacement of coolent , brake line set of two rear and front wheels , replacement of wheel cyling , replacment of wheel cyling kit front wheels , replacement of solenoid switch , replacmentof side indicator front and rear , replacment of head light bulbs 100 by 90 watt , reapir to door lock of right and left side window , replacmentof footmat as per sample , horn assy as per sample , stearing cover as per sample , side mirror make sultan , radiator leakage checking and labour charges for replacment of parts , lathe work and laboiur for replacement of spare parts , replacmentof defective altrnator stator assembly , replacment of tail lamp with complete accessories , checking of complete wiring system and replacement of old perished wiring , opening dismantling servicing and calbrationfo fuel injection pump , dismantlin g repairing servicing and refixing of stearing assembling inlcindg reapir to itie rod end set stearing worm gear front axle , complete allignment and b alancing and labour charge for replacemnt of parts , replacment of wiper blade complete

State Government

CTN :39332182

13 Jun, 2025 NA

Kheda - Gujarat

Tender For corrigendum : buy-back of set of worm shaft & worm wheel gear along with worm shaft key & locknut in set of coal mill type xrp 783 at wtps.

Central Government/Public Sector

CTN :38997469

07 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of ball screw assembly with nut , ball screw assembly drive bevel gear box , carriage assembly worm wheel set , carriage assembly drive pinion , collet

Central Government/Public Sector

CTN :40084464

04 Jun, 2025 NA

Mangalore - Karnataka

Tender For corrigendum : two years annual rate contract for the supply of spares for el-o-matic make valve actuators and actuator units - spare kit,for actuator model:pd1100,el-o-matic,pv421548a, spare kit for actuator,model:pd750,el-o-matic, fv421529a/b, repair kit for es40 actuator, repair kit for actuator,pe150, manual override moi for pe280 actuator, actuator spare kit for model pe 750, actuator spare kit for model pe60, repair kit, for actuator model es100/5/a,for uv14006/7/5/14/4/2/23/12 valves., spare kit for elomatic make pneumatic actuator model:es1600, spare kit for elomatic make pneumatic actuator model:es200, spare kit for elomatic make pneumatic actuator model:es600, spare kit for elomatic make pneumatic actuator model :ps4000, elo-matic limit switch with box ,model:nj2-v3-n for etp 3, uv373505c, slno21766 and es100/5/a ,es100/5/d elomatic actuator, uv373106a/b es600 elomatic actuator slno 2002 and 2003, xv412059 - es 850 actuator sl no 1167, uv373505c, slno21766 and es100/5/a ,es100/5/d elomatic actuator, xv412059 - es 850 actuator sl no 1167, spare kit for elomatic make pneumatic actuator model:ps2500, service kit,inter valve,type: butterfly,size:200nb,body moc: ivtl,cf8,iv no:1041562f1,etp3, service kit,inter valve,type:butterfly,size:400nb,body moc: ivtl,cf8,iv no. 1041562l1 ,etp3, service kit,inter valvei ,type:butterfly ,size:150nb,body moc:ivtl,cf8m,iv no:1041562d1,etp3, service kit,inter valvei,type: butterfly ,size:250nb,body moc: ivtl,cf8,iv no:1041562h1,etp3, service kit,inter valvei ,type:butterfly ,size:150nb,body moc:ivtl,sgi,iv no:1041562c1,etp3, service kit,inter valvel, type:butterfly ,size:50nb,body moc: ivtl,sgi,iv no:1041562 a1 ,etp3, elomatic actuator full unit model es100, spring for elomatic actuator model es100, manual over-ride, worm and gear type and clutch facility, body moc: cast aluminium, model:mo ii, make: el-o-matic, manual over-ride, worm and gear type and clutch facility, body moc: cast aluminium, model:mo iii, make: el-o-matic, spare kit for elomatic actuator,model, pe-1100/8, spare kit for elomatic actuator,model, ed-950, spare kit for elomatic actuator,model, ed-1600, spare kit for elomatic actuator,model, pd-2500, spring set for elomatic actuator,model, es-200/, spare kit for elomatic actuator pd 4000 for 8",300#, spare kit for elomatic actuator ed 600 for 2" 300#, spare actuator o ring kit 40mm, fs 300# fe pno for 1.5x300#, elomatic actuator mdl:, , actuator repairkit elomatic, 200/3 dcu, actuator repairkit elomatic, 350/6 dcu, o-matic actuator model es950/3/d, sr.no:1268, manual over-ride, worm and gear type and clutch facility, body moc: cast aluminium, model:mo- 0.5, with adaptor, mounting accessories ,hand wheel ..etc full unit suitable, actuator model es-40 sr no:, valve size 25nb sr no:130600, valve,make:el-o-matic-etp#, spare kit for elomatic make pneumatic actuator model:es40, spare kit for elomatic make pneumatic actuator model:es100, spare kit for elomatic make pneumatic actuator model:es25, actuator seal kit- es-200-elo-matic for valve 62uv001/62uv006/62uv011 for serial no 10622/10619/10623, actuator seal kit-dec es-600/4-elo-matic for valve 34hic002, actuator seal kit-dec es-40/4-elo-matic for valve 34uv063/34uv064/34uv067/34uv068, actuator seal kit- es-200/3/a-elo-matic for valve 56uv183/56uv199/56uv205 for serial no 11138/11137/11139, actuator spring-dec es-600/4-elo-matic for valve 34hic002, actuator spring-dec es-40/4-elo-matic for valve 34uv063/34uv064/34uv067/34uv068, actuator spring- es 600/3/a-elo-matic for 50uv970/50uv971 for serial no 2539/2538, actuator spring- es 4000/8/a-elo-matic for 50uv951/50uv952 for serial no 2864/2865, actuator seal kit for ng valves uv380158501/03/06/09/10 mdl no ps 4000/8/a, actuator seal kit for ng valves uv380158502 model no es 100/3/a, actuator seal kit for ng valves uv3801585011 & 12 model no pe-60/8/d, body soft part seal kit for ng uv380158511/12 size 1*300,model 60/8/d moc cf8/cf8/ss316/ptfe, body soft part seal kit with seat

State Government

CTN :40505667

04 Jun, 2025 15.69 Lacs

Kamalapur - Telangana

Tender For operation and maintenance lubrication of hoist equipment, overhauling of rollers , removal and refixing of rubber seals of gates, worm gear repair, sand blasting with painting to cross regulator km.202.178 on kmc, painting to dbms from dbm16 to dbm 20 and minor repairs to dbm16, dbm19 and kamalapur ot on kmc for the year 2024-25.

State Government

CTN :40251751

11 Jun, 2025 9.32 Lacs

Multi City - Telangana

Tender For corrigendum : supply of shanthi gears make 80 80 189 cd heli worm gear box (gf-315 rev 04/b0246 gear ratio 125/1) for gravimetric coal feeder for boiler

CTN :40532741

12 Jun, 2025 99.4 Thousand

Kolkata - West Bengal

Tender For premonsoon maintenance repair work of worm gear driven rope drum hoisting mechanism of 10 vent chemaguri sluice at chemaguri ps sagar dist south 24 pgs

Ht Gear Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government