Latest humidity indicator Tenders | Government humidity indicator Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43028928

13 Dec, 2025 3.33 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of multiple items -tool box steel , plier long nose , self locking crimping tool , combined plierx9 , tools set , wire striper , rubber gloves , battery charger , rubber mat , temperature humidity indicator , drilling machine , mccb 200amps , hot air blower with attac , rat repient elctric

Central Government/Public Sector

CTN :42771648

06 Dec, 2025 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of balance supplies main supply and mandatory spares bbu items of ac system c c--50 mm as per sr no 100 of annexure-1 , gate valve - 32 mm as per sr no 101 of annexure-1 , balancing valve - 200 mm dia as per sr no 102 of annexure-1 , balancing valve - 125 mm dia as per sr no 103 of annexure-1 , balancing valve - 150 mm dia as per sr no 104 of annexure-1 , balancing valve - 100 mm dia as per sr no 105 of annexure-1 , balancing valve - 80 mm dia as per sr no 106 of annexure-1 , balancing valve - 25 mm dia as per sr no 107 of annexure- 1 , balancing valve - 65 mm dia as per sr no 108 of annexure-1 , non return valve - 100 mm dia as per sr no 109 of annexure-1 , non return valve - 200 mm dia as per sr no 110 of annexure-1 , non return valve - 150 mm dia as per sr no 111 of annexure-1 , non return valve - 125 mm dia as per sr no 112 of annexure-1 , non return valve - 40 mm dia as per sr no 113 of annexure-1 , non return valve - 25 mm dia as per sr no 114 of annexure-1 , control valve 2 way as per sr no 115 of annexure-1 , control valve 2 way as per sr no 116 of annexure-1 , control valve 2 way as per sr no 117 of annexure-1 , control valve 3 way as per sr no 118 of annexure-1 , control valve 3 way as per sr no 119 of annexure-1 , control valve 3 way as per sr no 120 of annexure-1 , humidity sensors as per sr no 121 of annexure-1 , geyserstat as per sr no 122 of annexure-1 , local humidity indicator as per sr no 123 of annexure-1 , all bearings as per sr no 124 of annexure-1 , brake assembly and its liners as per sr no 125 of annexure-1 , wire rope as per sr no 126 of annexure-1 , limit switch as per sr no 127 of annexure-1 , all bearings as per sr no 128 of annexure-1 , brake assembly and its liners as per sr no 129 of annexure-1 , terminal plates as per sr no 130 of annexure-1 , greasing arrangements as per sr no 131 of annexure-1 , motor of each type and rating as per sr no 132 of annexure- 1 , bearings de drive end and nde non drive end for each type and rating of motors as per sr no 133 of annexure-1 , stator winding coils for all type of lt motors as per sr no 134 of annexure-1 , dust seals and gaskets for each type of motors as per sr no 135 of annexure-1 , terminal plates as per sr no 136 of annexure-1 , greasing arrangements as per sr no 137 of annexure-1 , motor of each type and rating as per sr no 138 of annexure-1 , bearings de and nde for each type and rating of motors as per sr no 139 of annexure-1 , stator winding coils for all type of lt motors as per sr no 140 of annexure-1 , dust seals and gaskets for each type of motors as per sr no 141 of annexure-1 , terminal plates as per sr no 142 of annexure-1 , greasing arrangements as per sr no 143 of annexure-1 , motor of each type and rating as per sr no 144 of annexure-1 , bearings de and nde for each type and rating of motors as per sr no 145 of annexure-1 , stator winding coils for all type of lt motors as per sr no 146 of annexure-1 , dust seals and gaskets for each type of motors as per sr no 147 of annexure-1 , terminal plates as per sr no 148 of annexure-1 , greasing arrangements as per sr no 149 of annexure-1 , motor of each type and rating as per sr no 150 of annexure-1 , bearings de and nde for each type and rating of motors as per sr no 151 of annexure-1 , stator winding coils for all type of lt motors as per sr no 152 of annexure-1 , dust seals and gaskets for each type of motors as per sr no 153 of annexure-1 , terminal plates as per sr no 154 of annexure-1 , greasing arrangements as per sr no 155 of annexure-1 , motor of each type and rating as per sr no 156 of annexure-1 , bearings de and nde for each type and rating of motors as per sr no 157 of annexure-1 , stator winding coils for all type of lt motors as per sr no 158 of annexure-1 , dust seals and gaskets for each type of //bid details 3 / 164 motors as per sr no 159 of annexure-1 , terminal plates as per sr no 160 of annexure-1 , greasing arrangements as per sr no 161 o

Central Government/Public Sector

CTN :43040227

16 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of humidity indicator assembly for air drye [humidity indicator assembly for air dryer, knorr bremse part no. 1.4.3087 or ftril part no. 291220.00a. ]

State Government

CTN :42824868

05 Dec, 2025 4.95 Lacs

Multi City - Karnataka

Tender For a) supply of 9 nos. of programmable digital multi-function meter and installation, testing and commissioning of mfm meters for individual units b) supply, installation, programming, testing and commissioning of 1 no. masi bus large display mw indicator and 1 no. of programmable digital mw meter of measuring range 0-150mw(dpm-96x96) for total display of station load c)supply, installation, testing and commissioning of three nos. of input summation cts 15va with one no. of transducer d)supply & installation of modbus to ethernet converter e)supply of mounting and wiring accessories like cables, lugs, ferrules, hose pipes etc f)installation of all the meters including laying of cables, wirings, testing, programming & commissioning as per scope of work

Central Government/Public Sector

CTN :42590243

08 Dec, 2025 NA

Ajmer - Rajasthan

Tender For corrigendum : supply of kit humidity indicator for faiveley make air dryer to ftrtipl pt no-790029105a or prag pt no- 4104120 or sil pt no-09891301 or any other make compatible to faiveley air dryer in hhp loco.

Humidity Indicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector