Latest hydraulic aggregate Tenders | Government hydraulic aggregate Tenders

State Government

CTN :45080806

15 May, 2026 NA

Multi City - Gujarat

Tender For annual rate of supplying labour and machinery for works of chhotaudepur (r & b) division, chhotaudepur and other division at tejgadh hot mix plant. (for labour and machinery) - hire charges of dumper for carting of dry/hotmix material from sevaliya department quarry to drum mix plant site sayajipura, vadodara to paver site including loading, unloading, transportation of material to paver finisher site, fuel and wages of operator etc. complete as directed. (payment is made for single way kilometer) ( for patch work & misc. work ) as per sor lead chart (a) upto 5 km, upto 5 to 10 km, upto 10 to 15 km, upto 15 to 25 km, upto 25 to 50 km, upto 50 to 100 km, upto 100 to 200 km, spreading hot ashphalt material on road with help of labour supply and providing machinary of 2 nos. of roller on daily basis for laying of asphaltic material including cleaning of road using air compressor and front end loader whenever required on on multiple site at a time, jcb for removing extra stuff on road and helping on plant side for smooth operation of plant with all respect including sprayer for emulsion spreading include smooth movement of material and labour on paver site including cost of oil, fuel and wages of operator etc complete., hire charges for front end loader including cost of oil, fuel and wages of operator etc complete. (a) front end loader 3.1 cum bucket capacity, (b) front end loader 2.1 cum bucket capacity, (c) backhoe-loader 1 cum bucket capacity, hire charges for hydraulic excavator including cost of oil, fuel and wages of operator etc complete. (a) hydraulic excavator of 1.2 cum bucket, (b) hydraulic excavator of 1.1 cum bucket, (c) hydraulic excavator of 0.9 cum bucket, (d) jack hammer (attachment of hydraulic excavator), hire charges for vibratory roller including cost of oil, fuel and wages of operator etc complete. (a) vibratory soil compactor (10 tonne), (b) smooth wheeled roller 8 tonne, (c) tandem roller 8 to 10 tone, (d) mini tandem roller, (e) pneumatic road roller, hire charges for tractor trolly including cost of oil, fuel and wages of operator etc complete., hire charges for backhoe loader 1 cum capacity including cost of oil, fuel and wages of operator etc complete., hire charges for paver finisherincluding cost of oil, fuel and wages of operator etc complete. (a) paver finisher mechanical, (b) paver finisher hydrostatic with sensor control -240 hp, (c) paver finisher hydrostatic with sensor control -170 hp, hire charges for air compressor including cost of oil, fuel and wages of operator etc complete. (a) air compressor -250 cfm, (b) air compressor -500 cfm, hire charges for generator including cost of oil, fuel and wages of operator etc complete. (a) generator 725 kva, (b) generator 500 kva, (c) generator 400 kva, (d) generator 250 kva, (e) generator 125 kva, (f) generator 100 kva, (g) generator 62.5 kva, (h) generator 33 kva, (i) generator 15 kva, hire charges tipper including cost of oil, fuel and wages of operator etc. comp. (for patchwork & misc. work) (a) tipper-18 cum, (b) tipper-14 cum, (c) tipper-10 cum, (d) tipper-5.5 cum, hire charges for crane including cost of oil, fuel and wages of operator etc complete. (a) crawler mounted crane 35 tonne capacity, (b) crawler mounted crane 80 tonne capacity, (c) crawler mounted crane 100 tonne capacity, (d) mobile hydraulic crane 3 tonne capacity, (e) mobile hydraulic crane 5 tonne capacity, (f) mobile hydraulic crane 10 tonne capacity, (g) mobile hydraulic crane 15 tonne capacity, (h) mobile hydraulic crane 20 tonne capacity, (i) mobile hydraulic crane 35 toone capacity

State Government

CTN :45067228

18 May, 2026 NA

Jummu - Jammu And Kashmir

Tender For supply of new lubricants for different department vehicles and machinery of jmc - m. oil 15w 40 , m. oil 20w 40 , hydraulic oil 68 , gear oil 90 , t.q. , break oil -dot 3 , coolant -conc , grease -ap3 , c.d. 30 , axle oil , urea diesel exhaust fuel def

CTN :45058091

11 May, 2026 1.35 Lacs

Gurdaspur - Punjab

Tender For supply of oil filter nk 7856 , fuel filter nk 7857 , air filter nk 7175 , ac filter nk 7171 , front disc brake pad nk 7859 , lever gear shifting control , joint assy universal 3010 000644 , relay valve 2530 72 0306882 , brake cylinder 443 612 193 017 , system protection valve x882300 , hydraulic aggregate ha 25-3v pump , cover assy 130 015 230 034 , spring 130 3 , gear shift lever 442 071 111 594

CTN :45045883

13 May, 2026 NA

Pune - Maharashtra

Tender For supply of 10341179 lv7 stln vf x 7483200 fuel injection pump 122kw bs 2 hyd ksb , 10335086 lv7 av 15 153982 connecting shaft complete , 10314238 lv7 av 15 578 903 910 752 62 jib lifting cyl right , 10347246 lv7 av 15 578 903 911 752 62 group distributor modify , 10328300 lv7 t 815 443 522 756 708 heater x7 1m s3 24v , 10330403 lv7 t 815 117 711 012 000 power steering rv 7826310 02 , 10324854 lv7 t 815 150 200 003 004 hydraulic aggregate ha 25 3v pump , 10330074 lv7 t 815 4x4 207 182 039 4 gear shift booster , 10519124 lv7 t 815 hmv 336 711 002 000 booster rv 78 26310 42

Central Government/Public Sector

CTN :45054908

12 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot miscellaneousellaneous scrap - cond and scrap all type of dismental machinery part comp. hydraulic elevating table portable air installation current transformer , hand rolling machine, air compressor, chord trolly, electric blower with motor, pump with motor, rectifier battery charging wasting house, pistal grip, portable electric drill, automatic fan winding machine, hand pallet, tanki, accl compressor, vacuum reservoir and other miscellaneous machinery part, different make and capacity - with motor, along with accessories with n/f attachment, broken , as is where is basis as it is. loading by purchaser

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :44342352

11 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : electro hydraulic operation table (major) - e bid for the procurement of machinery & equipments

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

CTN :44767631

02 May, 2026 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of 10531067 releif valve vpc 4a 7.4 bar , 10325619 sealing ring 12x16 , 10350106 synchromesh cone ii , 10302998 sealing ring 286x3 silicon rubber gr tse , 10519409 tapered roller bearing 32209a , 10331833 thrust ring , 10323483 dust seal boot , 10614936 bulb h4 24v 925946 , 10324801 window frame lh , 10324854 hydraulic aggregate ha 25 3v pump , 10614845 door filling rh , 10333402 tool box

corporations/Associations/Others

CTN :45004229

02 May, 2026 8.22 Lacs

Rajahmundry - Andhra Pradesh

Tender For desiltation of major drains from raghavendra swamy math to sharada peetham, via kambham satram, from godavari bund at kambham satram, crossing the road via sulabh complex and up to rajikula kalyana mandapam sulabh complex, from rajikula kalyana mandapam to tyagaraja gana sabha, via sitara hotel and up to hindu samajam rajamahendravaram municipal corporation. (with machinery excavator 200 long stick of total 12 mts length and shovel bucket size 0.85 cum / 200lc/ hydraulic excavator)

Hydraulic Aggregate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others