Latest hydraulic machine sale Tenders | Government hydraulic machine sale Tenders

CTN :43069811

15 Dec, 2025 11.00 Lacs

Bagepalli - Karnataka

Tender For tractor engine capacity cc 2858 or above type of fuel diesel vehicle emission compliance bharatstage tremiiia max engine power 39hp engine rp mat maxpower 1800 maximum enginetorque nm 180 engine rp mat maxtorque rpm 1200 power take off pto type transmission maximum pto power hp 36 72 rp mat maximum pto power 1800 operator station 800 engine aspiration system open station engine cooling natural fuel in jection water cooled fuel tank capacity ltrs inline length of tractor body mm 55liter width of tractor body mm 3770 millimeter ground clearance mm 1725 millimeter wheel base mm 410 millimeter size of front tyre with plyrating mm 1960 millimeter size of rear tyre with plyrating mm 6 00 x 168pr track width front mm 13 6 x 2812pr track width rear mm 1280 millimeter tractor transmission system 1360 millimeter number of forward gears setting partial constant mesh type of wheeldrivetwo wheel drive drive axle rear type of steering manual tractor brake dry discbrake type of clutch dry clutch clutch operation single lifting capacity at hitch point kg 1200kilogram turning radius mm 3600millimeter trailer type of trailer semi trailer singleaxle type of platform tipping platform capacity of trailer 5 tonnes type of axle assembly class b axle assembly wheeltrack mm 1500 number of wheels 2 operating pressure 13 8 tipping angle of body indegrees incase of tippingtype 42 5 dimensions overall width of trailers between extreme points meter 1 83 meter overall length of platform 3 05 meter overall height of trailers with tyre inflated from the supporting surface ground to top of platform meter 608 inch overall height of trailers with tyre inflated from the supporting surface 0 915meter ground clearance mm 300 meter construction parameters material used for fabrication of trailer as per clause 5 table 1ofis 8213 latest yes reto reflective marking tapesas per ais 090 yes lighting and lighting signalling device as perais 0 62 yes trailers shall be fitted with rear under run protective yes device rupd confirming to 4812 latest yes trailers shall have service and parking brake as perais 043 nomaximum load transfer from trailer to load toweye of trailer yes 20percent of trailer capacity isi marked ismc channel used for fabrication of chassis and frame mounting on chassis yes no of spring leave splates fitted nos 1 lashing hooks for towing download yes no of hooks 8 type of towing device paintedcolouronthetrailersasper ais 112 red one coat of red oxide and 2coat of super synthetic enamel paint yes the price should include the insurance and registration charges of the vehicle

CTN :43041140

10 Dec, 2025 NA

Kharagpur - West Bengal

Tender For supply of hydraulic scissor lift:- a) lift capacity: 1000 kg, b) maximum lift height: 1000 to 1150mm, c) minimum height : 270 to 350 mm, d) platform size length: 1300 to 1600 mm, e)width 420 to 510 mm, f) lifting type: hydraulic pedalling, e) material: mild steel f) turing radius: 900 to 1000 mm, g) with moving wheels

State Government

CTN :42814576

10 Dec, 2025 50.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of recumbent bikes (q3) , upright bike (q3) , commercial air bike (q4) , spin bike (q3) , lat pull down (version 2) (q3) , cable cross over (version 2) (q3) , seated calf raise machine (q4) , multi adjustable bench (v2) (q3) , dumbbell rack (q3) , rubberized weight dumbbells (q3) , rubberized weight plates (q3) , weight lifting set (v2) (q4) , barbell rack (vertical barbell holder) (q4) , flooring for gym (q4) , heavy duty commercial treadmill , commercial elliptical trainer , commercial air rowing machine , leg curl or leg ext , abdominal or back ext , power rack or smith machine , bumper plate rack for weight liftting floor , compitition bar men , compitition bar women , weight lifting platform , hip thruster , technique box set , soft playo box set , metal playo set , fractional change discs , powder stand pro

Central Government/Public Sector

CTN :42983582

04 Dec, 2025 NA

Bokaro - Jharkhand

Tender For cutting, dismantling and lifting of platform, beam and joist for civil foudation wore and repairng and repalcement of wb2 dismantling platform beam and joist and reinstallation of the same of ej area

Central Government/Public Sector

CTN :42956361

26 Dec, 2025 61.87 Lacs

Rajouri - Jammu And Kashmir

Tender For provisioning of electrical and mechanical eqpt against ber under ge 862 ews - supply, installation, testing and commissioning of serve controlled voltage stabilizer (confirming to bis 9815 (part-1) 1994, reaffirmation 2019 latest version) three phase, four wire (rybn), 50 hz, naturally oil cooled, outdoor, unbalanced type, cooper wound, metallic body duly power coated with lifting hooks two nos, digital display type, relay free smooth and silent operation with 1st filling of transformer oil up to level having following specification:-(a) capacity 300 kva (b) type - suitable for unbalanced load and unbalanced input(c) input voltage -360v-480v, input frequency 50 hz (d) output voltage - stabilized at any deigned/ desired voltage 415/+-1% (e) rated frequency - 50 hz(f) wave form distortion - nil (g) response time - not to exceed 20 milli seconds(h) sensitivity - (+/-) 1% (j) rate of correction - not less than 6 volt/second between phase and neutral (k) efficiency - more than 95% (l) type of load - three phase, unbalanced type(m) metering - digital display voltmeter/ammeter with multi-functional meter (n) operating temperature - for indoor use upto max ambient temp + 55 c (o) dimmer rating - 450 amp (p) dimension of tanks - as per oem design(q) oil capacity- as per oem design , (r) class of insulation - class f (s) mode of operation automatic/manual (t) winding temperature rise - max 55 c (10 c above operating temp) (u) transformer oil -is 335 marked (v) core-crgo m4 grade/crno (cold roll grain oriented)/ (cold rolled non-oriented)(w) auto transformer (variac) -100 percent copper wound electrolytic grade(x) losses - as per is norms (y) power factor - not less than 0.95(z ) protection - (i) over load protections (ii) short circuit protections (iii) high/low voltage cut off (iv) by pass arrangement in case of emergency (v) single phase sequence change /phase fail protection (vi) earth fault protection(aa) standard fitting & accessories e.g marking plate, lifting lugs, ci rollers, earthing terminals, cable box including suitable platform as reqd on site complete all as as specified & directed., supply, installation, testing and commissioning of serve controlled voltage stabilizer (confirming to bis 9815 (part-1) 1994, reaffirmation 2019 latest version) three phase, four wire (rybn), 50 hz, naturally oil cooled, outdoor, unbalanced type, cooper wound, metallic body duly power coated with lifting hooks two nos, digital display type, relay free smooth and silent operation with 1st filling of transformer oil up to level having following specification:-(a) capacity 100 kva (b) type - suitable for unbalanced load and unbalanced input(c) input voltage -360v-480v, input frequency 50 hz (d) output voltage - stabilized at any deigned/ desired voltage 415/+-1% (e) rated frequency - 50 hz(f) wave form distortion - nil (g) response time - not to exceed 20 milli seconds(h) sensitivity - (+/-) 1% (j) rate of correction - not less than 6 volt/second between phase and neutral (k) efficiency - more than 95% (l) type of load - three phase, unbalanced type (m) metering - digital display voltmeter/ammeter with multi-functional meter (n) operating temperature - for indoor use upto max ambient temp + 55 c (o) dimmer rating - 150 amp (p) dimension of tanks - as per oem design(q) oil capacity- as per oem design , (r) class of insulation - class f (s) mode of operation automatic/manual (t) winding temperature rise - max 55 c (10 c above operating temp) (u) transformer oil -is 335 marked (v) core-crgo m4 grade/crno (cold roll grain oriented)/ (cold rolled non-oriented)(w) auto transformer (variac) -100 percent copper wound electrolytic grade(x) losses - as per is norms (y) power factor - not less than 0.95(z ) protection - (i) over load protections (ii) short circuit protections (iii) high/low voltage cut off (iv) by pass arrangement in case of emergency (v) single phase sequence change /phase fail protection (vi) earth fault protection(aa) standard fi

State Government

CTN :42941379

11 Dec, 2025 23.50 Lacs

Srinagar - Jammu And Kashmir

Tender For fabrication of heavy duty platform with flooring and lifting ramp on mahindra blazo x m dura 35 gvwton , 8x4 cab chassis (cab chassis is available with the department)

CTN :42949870

09 Dec, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of pro punch , boxing bag with wall bracket , economy speed ball , spare bladder , speed ball platform set , foam rod , wrestling arena mat and cover square , mma grappling dummy , muay thai gloves , muay thai head guard , muay thai shin pad , foam chaku , boxing hand wrap , sig sauer 716 rifle dummy , ak dummy , pistol dummy , knife dummy , interlock flooring 29mx24m , eq equalizer , competition kettle bell 4 kg , competition kettle bell 8 kg , competition kettle bell 12 kg , hexagon rubber dumbbells 5 kg , hexagon rubber dumbbells 7.5 kg , hexagon rubber dumbbells 10 kg , hexagon rubber dumbbells 12.5 kg , hexagon rubber dumbbells 15 kg , olympic weight plate tree , curl bars , multi grip barbells , dead lift barbells , barbell lock , chalk stand , gymnastic rings , plyo boxes , flooring mat 40 pcs x 1 set , power lifting belt s m l xi , warranty , annual maintenance contract amc for 1 year

Central Government/Public Sector

CTN :42901048

15 Dec, 2025 31.24 Lacs

Kamrup - Assam

Tender For supply of strength and conditioning and biomechanics non consumable d d - functional movement screen , back belt universal weight lifting belt adjustable hinges required , back belt universal nylon belt adjustable hinges required , hyperextension bench or roman chair adjustable from 45 degree to 90 degree , sled , concept 2 skierg wall mount , gymware integrated package , exxentric kbox4 active system , smart indoor bike for warm up , force platform carrying case , electronic goniometer , pressure plate , stadiometer

Central Government/Public Sector

CTN :42906253

16 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For supply of single scissor lifting platform table

State Government

CTN :42756421

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of gym for strength and conditioning equipments - power racks, length minimum 1865 mm width minimum 1815 mm height minimum 2140 mm product weight 275 kg or more.max training weight 350 kg or more live arena 3x3 meterframe construction: heavy-duty steel construction for durability and stability during heavy lifting. made up of 75 mm x 75 mm square tubes size with 3mm thickness or more.the frame provides tighter 50 mm hole spacing and a long-lasting finish optimized for gliding attachments.power rack must have inbuilt 3 handle pull up bar, designed for veracity. the three handle pull up bar features 32mm hand in mixed configuration for supreme ergonomics. large six weight horns collars for convenient weight plate storage of four small horns. (standard six large horns). single bar hanger, double side hook for bar holder, adjustable support arm with locking features.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the quoted brand and model must have all three valid regulatory certificates: en 957-6:2010+a1:2014, bs en iso 20957-2: 2021, and astm f1749.note: the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., inserted platforms, length minimum 4415 mm width minimum 1095 mm thickness of wood 30 mm.dimensions of rubberized platform :length 1100 mmwidth 670 mmthickness of rubber 30 mm.feature: must have inserted wooden platform size as mentioned above, non slippery rubberized platform on both sides outside the rack as per sizes mentioned above. should be attaching snugly to the rack frame to create a complete lifting station.platform must be made of sealed plywood 30mm thick with rubber mat 30 mm thick, perfectly covered boundaries into a metal frame of 30 mm x 60 mm sq tube of 3 mm thickness. platform sheet metal should be a minimum 1.2 mm thick.it should be compatible with the specified power rack (as mentioned above) and should fit into the power rack without any gaps.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., platerform, length minimum 2090 mm width minimum 2460 mm height minimum 105 mm weight minimum 290 kgcompact footprint, reduce sound and vibration 1.8x quieter than 30 mm tiles.the platform should have efficient sound vibration reduction quality that helps to create inviting strength training environments by reducing the sound and vibration from dropped barbells and weights and clearly defining the lifting space for members, improving safety and facility flow.the custom multi-layered wood deck should be protected with a non-slip, hard wearing laminate and an inlaid rubber strip to guard deck edges, bumpers and plates from damage.solid construction with durable, high-quality materials stands up to heavy use in sports.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018. the vendor must provide detailed information about these certifications along with appropriate justification., landmine, plate mountable landmine length 335 mmwidth 81 mmheight 65 mmweight minimum 2.8 kgwarranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four

Hydraulic Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government