Latest hydraulic unit Tenders | Government hydraulic unit Tenders

State Government

CTN :39737118

26 Mar, 2025 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat nighoje tal khed dist pune - supplying and erecting modulartype switch6a / 10a, supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length, providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in, supplying and erectingled street light fitting suitable for 36w to 40w led street light, including lamp, with pf > 0.95 class ip 65 ., supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95,class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg. with driver, oprator and disel etc. for per day basis, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg. with driver, oprator and disel etc. for per day basis, labour chrages for led fitting on street light or ms light pole., dismentaling charges -led street light of pole., 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying & laying armoured cable 4c x 6 sq.mm., supplying & laying armoured cable 4c x10 sq mm, supplying & laying armoured cable 2c x 10 sq mm, supplying & laying armoured cable 4c x 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm complete , supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials. 4-4-3, supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole., supplying and erecting mains with isi mark wp2 x 6 sq. mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no. 8 swg 1-4-3, supplying and erecting mains with isi mark wp2 x 2.5 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying and erecting mains with isi mark wp2 x 10.00 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq. mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box for mcb, big size frp box for mcb, supplying and laying (including excavation of

State Government

CTN :39741725

25 Mar, 2025 NA

Nanded - Maharashtra

Tender For tata hitachi 120 h x no. 051230 regarding repair of machine servicing, under carrage, arm cylinder & hydraulic system etc. of this machine through external agency.

Central Government/Public Sector

CTN :39731060

28 Mar, 2025 1.36 Lacs

Wani - Maharashtra

Tender For providing of custom bid for services - ---- repairing of arm end barrel of be-1000 hydraulic excavator sl.no.10205

CTN :39276459

22 Mar, 2025 2.00 Lacs

Sagar - Madhya Pradesh

Tender For bid to ras tender for supply of hydraulic cylinder dco 1715-7695 , hose- 4x10000 50-v643 , thrust ring -130 051 011 394 , electric horn 24v dc , wiper arm , v-belt-avx 13x725 la optibelt , protective bag , upper intake manifold , clutch cover-mzf , fuel hand pump-9001

State Government

CTN :39724741

24 Mar, 2025 2.33 Lacs

Delhi - Delhi

Tender For repairing of bucket cylinder assembly, arm cylinder assembly and bucket etc. of long boom hydraulic excavator beml he-09 at site.

CTN :39523798

29 Mar, 2025 60.92 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for hydraulic power packs installed at wagon tipplers &ampamp side arm chargers of coal handling plant, katpp, jhalawar

CTN :39038230

29 Mar, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

Central Government/Public Sector

CTN :39725146

24 Mar, 2025 2.50 Lacs

Dhanbad - Jharkhand

Tender For repairing of arm assembly (brought from block-ii area) for be1000-1 hydraulic shovel machine sl. no. g-10255 at block-iv ocp of govindpur area-iii, bccl.

Central Government/Public Sector

CTN :39714933

24 Mar, 2025 NA

Bangalore - Karnataka

Tender For supply of executive chairs (high back) general requirement type of chair high back understructure tilt mechanism synchronic tilt mechanism locking mechanism upright locking seat dep th adjustment adjustable revolving mechanism designed with 360 degree-revolving type height adjustme nts pneumatic/hydraulic pedestal base glass filled nylon type of chair base with castor twin wheel castor material nylon number of twin wheel castor / studs (nos) 5 minimum diameter of twin wheel castor (mm) 5 0 mm minimum thickness (in mm) of ms plate joining the backrest with seat of the chair 6 millimeter seat seat base material hot pressed plywood seat material moulded pu density of pu used in seat (kg per cubic meter) >40<=50 actual density of pu used in seat (kg per cubic meter) 50 thickness of pu used in seat (m m) >40<=50 actual thickness of pu used in seat (mm) 50 millimeter minimum seat height from floor surfa ce (mm) >400<=500 actual seat height from floor surface (mm) 446 millimeter seat height adjustment (m m) 112 millimeter width of seat (mm) >400<=450 actual width of seat (mm) 480 millimeter depth of seat (mm) >400<=450 actual depth of seat (mm) 480 millimeter seat upholstery material mesh fabrics upholst ered material seat colour black backrest backrest type flexi back headrest type adjustable type backrest height fixed backrest support type fixed lumber support backrest base frame material injection moulded pl astic density of pu used in backrest (kg per cubic meter) na actual density of pu used in backrest (kg per c ubic meter) 0 thickness of pu used in backrest (mm) na actual thickness of pu used in backrest (mm) 45 m illimeter width of backrest (mm) >400<=450 actual width of backrest (mm) 495 millimeter backrest heigh t from the seat level >450<=550 actual backrest height 533 millimeter backrest upholstery material mesh fabrics upholstered material backrest colour black armrest armrest type and arm movement fixed armre st understructure material pp - polypropylene armrest top material pp - polypropylene warranty warranty period in number of years 1 year test report and certification oem of offered product is iso 9001 cer tified yes ]

Central Government/Public Sector

CTN :39670285

24 Mar, 2025 50.08 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of pump, part no.hpp99343015 , prv, part no.hpp99343028 , rotation unit assembly, part no.ru13343100 , control valve assly , part no.cv95343300 , telescopic leg assembly, part no.tl91343200 , main valve, part no.cv95343306 , water distribution sleeve, part no.ru13343106 , water seal, part no.ru13343107 , water housing, part no.ru13343108 , finger seal, part no.ru13343103 , o ring wds, part no.ru13343105 , key, part no.ru13343119 , ss hex nut, part no.ru13343123 , drive shaft, part no.ru13343104 , stud, part no.ru13343126 , chuck 22 a f , part no.ru13343102 , nut tightning adaptor, part no.ru13343128 , suction element , part no.hpp99343002 , r.l.filter , part no.hpp99343049 , r l filter element, part no.hpp99343050 , pressure gauge , part no.hpp99343054 , control valve, part no.cv95343314 , cylinder seal kit, part no.tl91343206 , control arm, part no.cv95343301 , valve liver carrier, part no.cv95343312 , control lever knob, part no.cv95343315 , coupling, part no.hpp99343021 , hydraulic motor , part no.ru13343120 , adaptor wh, part no.ru13343109

Hydraulic Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector