Latest hypalon coating roll Tenders | Government hypalon coating roll Tenders

CTN :40521848

09 Jun, 2025 NA

Delhi - Delhi

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation commissioning of equipments and devices for storage; buyer-providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levels formed by 3 nos . adjustable shelves . body units are bolted to under carriage . optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involves treatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating ,cold water rinse , passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns . the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx. 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration . a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together. 10 bodies.

State Government

CTN :40557200

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of cmt crt flooring 40 mm thick , providing and fixing in position tmt fe 500 bar reinforcmt , providing second class burnt brick masonry , providing internal cmt plaster 12mm thick in single coat , providing internal cmt plaster 20mm thick in single coats in cmt mortar , providing sand faced plaster externally in cmt mortar , providing and applying water proofing treatment , providing and fixing on walls ceiling floor 15 mm dia , providing and fixing on walls ceiling floor 25 mm dia. , providing and fixing on walls ceiling floor 40 mm dia. , providing and fixing p.v.c. rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing p.v.c. rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing 100 mm dia stabiliser pipe p.v.c. soil ventwaste pipe , providing and constructing brick masonry inspection chamber , providing and fixing mild steel grill wrk for windows, ventilators , providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm , supply and fixing of rock stone finished full body , providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. , providing and laying telephone black amba white cadburybrown ruby red ocean brown granite stone of 18 to 20 mm thick , providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm , providing and fixing tbl top white wash basin of size 120x635x405mm rubber plugs and brass chain , providing and fixing white european type wallhung pan , providing c.p. handshower health faucet 1 m pvc tube with wall hock jaquar make , providing c.p. toilet paper holder jaquar make continental , providing c.p. soap dish hooker jaquar make continental , providing and fixing divertor with overhead shower , providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories , providing and fixing 3.5 to 4 mm thick veneer finish wall panaling made out of 50 x 25 mm , providing and fixing rollar blinds ami make or approved make and shade , providing and fixing false ceiling with ecofriendly lightweight calcium silicate tiles , scrapping the old plastered internal surface with sand paper and coating. , providing and applying two coats of wall care putty on plastered surface , providing and applying plastic emulsion paint of approved quality, colour and shade , providing and applying two coats of exterior weather shield paint , providing and fabricating structural steel wrk in rolled sections like joists, channels, angles, tees , providing and fixing colour coated zinkalume r az150 , providing and applying two coats of flat oil paint , providing and fixing in position aluminum sliding vindov of 3 tr , providing and fixing solid core flush door shutter , providing and fixing single or double leaf panelled door shutter , providing and fixing in position powder coated aluminium louvered windows , providing and fixing overall 26height and 22depth,supported on aluminum pips ,troly basket made out of 5 mm ss rod ss kichen troly , providing and fixing of main tbl at 3600lx1400dx750ht made up of 18plus18mm thick mdf top with pvc membrane , providing and fixing single lair or birth of size 2025lx1000dx650h with cushn and bolster. , providing and fixing lair or birth side tbl of size 400lx 400dx 415h the lair or birth side unit is made up of 18mm thick prelam particle board with both side decorative lamina , providing and fixing dressing tbl of bid details/ 2 / 52 size 400lx 400dx 1800h. , providing and fixing wardrobe with mirror of size 900lx 600dx 1965h the wardrobe side panels and doors are made up of 18mm thick prelam particle board with both side decorative laminate. , providing and fixing cauche

State Government

CTN :40563490

09 Jun, 2025 24.16 Lacs

South Tripura - Tripura

Tender For fdr/mtc. of different roads under jatanbari pwd (randb) sub-division/sh-land slide clearance, bats filling,wbm,patch re-carpeting, grouting, sand seal coating,surface drains,wire crates etc. during the year 2025-26. group-ii

CTN :40534672

24 Jun, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - cloth,glass, hardener,enamel, hardener,adhesive, sealing and marking compound, gloves,mens, plastic bag, towel,paper, prussian blue paste , bearing surface, boric acid, anti-static bag, glycerol, petrolatum,liquid,technical, primer coating, coating compound,nonslip, coating compound,nonslip, surfacer,liquid, lacquer, polyurethane coating, lacquer, lacquer, paint, rubber, cutting fluid, grease, general purpose, remover,paint, desiccant container , dehumidifier, cartridge,dehydrator, cartridge,dehydrator, cloth,glass, potassium dichromate,technical:c, metal conditioning compound, coating compound,oxide black, deck covering underlay aggregate, sealing compound, grain,abrasive, impression inspection compound , surf, pumice,technical, solder,tin alloy, floor oil, hardener hv998-1, hardener,adhesive, biocide,fuel additive, cloth,abrasive, adhesive, sealing compound, antiseize compound, lubricant,solid film, grease,general purpose, enamel, enamel, tag,marker, insulation blanket,thermal, insulation blanket,thermal, adhesion promoter/nuclass:2g302, preservative coating,rubber, sealing compound, sealing compound, sealing compound, parting compound, sealing compound, dispenser kit,wedging materials, barrier material,water vaporproofed, soap,saddle, hp quick disconnect (hose), remover,paint, barrier material, waterproofed, flexi, cleaning cloth, tape,antiseizing, barrier material water vaporproofed, adhesive, inspection penetrant

CTN :39993528

31 May, 2025 NA

Jodhpur - Rajasthan

Tender For bid to ras custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion ce

Central Government/Public Sector

CTN :39950504

04 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of one coach set of aluminium extrusions and mouldings for lwscn-p p2 amrit bharat coaches, consists of : 1. extrusion to drg no.755-4-2-002,alt-c, item no. 1 1, lenght-1700 mm - 46 nos. 2. extrusion to drg no.755-4-2-002,alt-c, item no. 10, lenght-17 80 mm - 23 nos. 3. moulding to drg.no.755-4-3-002, alt-a, item no. 13, a)length-1850mm -20 n os , b)length-2110mm -10 nos , c)lenghth- 600mm -10 nos. 4. moulding to drg.no.755-4-3-00 2, alt-a, item no. 17, length-1850 mm - 20 nos. 5. extrusion to drg.no.aaa-4-4-586, alt-nil, le ngth-2000 mm - 60 nos. 6. flat moulding to drg.no.icf/std-4-3-008, alt-s, item -1, length-200 0 mm without holes-20 nos. 7. aluminium extrusion to drg.no.aaa-4-4-550, alt-nil,length 2 000mm (h)-60 nos. 8. aluminium extrusion to drg.no. icf/mrvc/c/bt-4-2-010, alt-nil, item-2, l ength- 2000 mm (p)-34 nos. 9. cover and ectrusion to drg no. 755-4-4-001,col-1, alt-g, item no.34 to 36. 10. extrusion to drg.no.dmu/tc/ss(529)-4-2-009,item no.1,length -2000 mm- 5 n os. 11. flat moulding to drg. no. 975-4-3-003,alt-a,item no. 5 - 4 nos. 12. aluminium extrude d angle moulding to drg.no.cc43353,anx-2,alt-a, length- 2000 mm -6 nos. 13. covering for emergency brake pull box to drg no. 581-3-5-035, alt-c-10 nos. 14. pelmet to drg.no 755-4- 4-002,alt-a, item no.9 - 2 nos. powder coating color shade to be in ral 0909005. necessary protective films to be provided in all visible surface of the item. [ warranty period: 30 mo nths after the date of delivery ]

CTN :40141352

28 May, 2025 NA

East Sikkim - Sikkim

Tender For bid to ras supply of road furniture - solar delinator solar edge indicator size 1200 mmas per irc 67 2022 technical details of solar guide posts made of mild steel of 75 76 od and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.the guide post shall have 8 red leds on equalivant gap total 48leds for brighter viewing of the motorists in fog. the leds shall start blinking as it gets dim. the solar delineator shall have solar panel on top of the surface for recharging. further it should have 2 strips of 150mm each of type xi sheeting specifications as per irc 67 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time also. , delinators size 1200mm as per irc 67 2022 roadway indicators as guide poles guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be concealed so that there should not be any exposed surface without powder coating the posts shall have an ellipsoidal design with the height of the pole shall be 900 mm above the ground with about 300mm base which can be anchored onto the ground as per irc 79 2019 mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves as per fig 1 of irc 79 2019 , delinators size 900 1000 mm as per irc 67 2022 roadway indicators as guide poles. guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts shall have an ellipsoidal design with the height of the pole shall be 800 mm above the ground with about 200mm base which can be anchored onto the ground as per irc 79 2019. mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time. to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting. the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves. as per fig 1 of irc 79 2019 , retroreflective tape 2 inch red 45 mtrs per roll , retroreflective tape 2inch yellow 45 mtrs per roll , retroreflective tape 2inch green 45 mtrs per roll , retroreflective tape 2 inch white 45 mtrs per roll , convex mirror size 40 inch or higher mirror thickness 05 mm or higher with mild steel pipe fittings length 98 inch dia 5 inch post suitable for convex morror mounting. , speed limit 40 kmph caution sign board of size 600 mm as per irc 67 2022 , speed limit 30 kmph caution sign board of size 600 mm as per irc 67 2022 , u turn prohibited caution sign board of size 600 mm as per irc 67 2022 , give way caution sign board of size 600 mm as per irc 67 2022 , stop caution sign board of size 600 mm as per irc 67 2022 , falling rocks caution sign board of size 600 mm as per irc 67 2022 , overtaking pro

Central Government/Public Sector

CTN :40447158

13 Jun, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of surface protection paint coating (clear)

State Government

CTN :40372927

05 Jun, 2025 24.26 Lacs

Ambasa - Tripura

Tender For fdr of different roads within the jurisdiction of jawharnagar pwd (r&b) sub-division during the year 2025-26/ sh:- clearing of land slide, restoration of damaged road formation, bamboo palasiding, constn. of unlined surface drain, placing of gunny bags, filling of bats in/c grouting, metaling, carpeting, seal coating etc. at different spots.

State Government

CTN :40417459

04 Jun, 2025 66.55 Lacs

Multi City - Karnataka

Tender For providing polymer based high performance corrosion protection epoxy coating on external surface of the penstocks from miv side to tb-5 at mghe works.

Hypalon Coating Roll Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government