Latest iccp system Tenders | Government iccp system Tenders

CTN :39739754

02 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of optics and opto mechanical components and equipments - 50:50 non-polarizing beamsplitter cube, 700 - 1100 nm, 1 or 25 mm specifications: cube side length - 25 mm or 1 clear aperture > 20mm wavelength range - 700 - 1100 nm ar coating (all four surfaces) with ravg 0.5% in the wavelength rangesubstrate material - n-bk7 beam deviation - 5 arcmin or lesssurface quality - 40-20 scratch-dig absolute t and r are within 47 10 %, kinematic prism mount for 1 or 25 mm cube beamsplitterspecifications:black anodized aluminum kinematic for vertical or horizontal mounting with two adjustersmounting platform plate with m4 tapped holesadjusters provide fine tip and tilt controlaround 100 tpi adjusters for 4 tip/tiltm4 through holes or taps in the back plate of mounts for post-mounting(it should be compatible with the item number 1), 1" or 25 mm broadband dielectric mirror, 750 - 1100 nm specifications:reflectance average > 99% or better for 750-1100 nmmaterial - fused silicasurface flatness - /10 surface quality - 10-5 scratch-dig or betterback surface - fine groundclear aperture - 85% or more of dimensionthickness - around 6 mm, 1" or 25 mm mirror mount with monolithic flexure arm, 3 adjusters, monolithic optic retentionspecification:tip, tilt, and z-axis adjustment with 100 tpimaterial heat-treated stainless steelcleanroom and vacuum-compatibleadjustment per revolution 7.7mrad/rev or lessfront plate translation 6mm or moreangular range 4 (it should be compatible with the item number 6), quadrant photodetector head, 1000 - 1700 nm, area 3.0 mm specifications:detector type - ingaaswavelength range - 1000 - 1700 nmdetector bandwidth > 100 khzactive area size - around 3.0 mmpeak responsitivity - 1 a/w or better within the operating wavelength rangetransimpedence gain - 10000 v/a or betteroutput - x, y, and sum analog signals through cable(s), ingaas switchable gain amplified detector, 800 - 1700 nm, area > 3 mm specifications:detector type - ingaaswavelength range - 800 - 1700 nmbandwidth - 10 mhz or largeractive area size - 3 mm2 or largergain adjustment and step - 10 db steps (8 to 10 position rotary)output - bnc (dc coupled), 0-5 or 0-10 v rangeoutput impedance - 50 ohmpeak response - 1 a/w or better within the operating wavelength range, 25.0 mm n-bk7 plano-convex lens, f=50 mmspecifications:focal length tolerance - 1%diameter - 25.0 mmroc - 25.8 1 mmmaterial - n-bk7ar coated for the 1050-1700 nm wavelength rangereflectance over coating range - 0.5 % or lesssurface quality - 40-20 scratch-digsurface irregularity - /4, 25.0 mm n-bk7 plano-concave lens, f=-50 mmspecifications:focal length tolerance - 1%diameter - 25.0 mmroc - 25.8 1 mmmaterial - n-bk7ar coated for the 1050-1700 nm wavelength rangereflectance over coating range - 0.5 % or lesssurface quality - 40-20 scratch-digsurface irregularity - /4

CTN :39467961

24 Mar, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : procurement of impressed current cathodic protection (iccp) system

Central Government And Public Sector

CTN :39662935

24 Mar, 2025 NA

Dibrugarh - Assam

Tender For supply of hex head bolt m12x100 high tensile. materials and specification.:- is:1364 (part -1) 2023 o r latest, ce with property class 10.9 to is: 1367 (part -3) 2017 or latest, coating as per mdts-057 make:-a ll approved vendors for axle end steel high tensile cap screws to be used in end hole of bg freight axles (i tem id 3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vender list available on uvam portal. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39663756

19 Mar, 2025 NA

Kapurthala - Punjab

Tender For supply of spring washer b8, coating as per mdts 057, as per drawing: is:3063-1994 grade 60c6, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. tra nsit damage , if any , shall be at the cost of supplier., quality plan: n.a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39663980

20 Mar, 2025 NA

Kapurthala - Punjab

Tender For supply of cheese hd screw m10x40, coating as per mdts-057, as per drawing: is:1366-1982 -4.8, packing instruction: as per standard packing. it should be ensured that item should n ot rub during transportation. the item should be packed with adequate strength. tran sit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39647080

17 Mar, 2025 NA

Kalka - Haryana

Tender For supply of hex head bolt m12x65-n high tensile, as per drawing: is:1364(part-1)-1992-ce-10 .9 coating as per mdts-057, packing instruction: as per standard packing. it should be ensu red that item should not rub during transportation. the item should be packed with ad equate strength. transit damage , if any , shall be at the cost of supplier. [ warranty pe riod: 30 months after the date of delivery ]

State Government

CTN :39627421

01 Apr, 2025 10.00 Crore

Jaipur - Rajasthan

Tender For neurosurgery item for neurosurgery department - super-selective high flow infusion catheters for cerebral/spinal avms (compatible with n-butyl cynoacrylates)- flow guided 150 - 180 cm long graded shaft stiffness should be compatible with 0.007, 0.008, 0.010"micro guide wire should have three segments, 1.2f, 1.5f, 1.8f, one tip marker microcatheter, 167 cmhybrid braided catheter for liquid embolic injection coil reinforced and braid reinforced0.0165/0.013 inch id, 0.014 compatible guidewire dmso compatible2.1f proximal od, 1.3f distal od, super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) with detachable tips 150-180 cm long graded shaft stiffness should be compatible with 0.007, 0.008, 0.009, 0.010" micro guide wire should have multi-segmented construction specify hydrophilic coating specify detachment mechanism, 1.2f, 1.5f, 1.8f, 1.2 f with combined packing of catheter and compatible wire, 1. 5 f with combined packing of catheter and compatible wire, super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) without detachable tips 150-180 cm long graded shaft stiffness should be compatible with 0.007,0.008, 0.009-inch micro guide wire specify hydrophilic coating, 1.2f,, 1.3f,, 1.5f,, 1.8f,, selective infusion micro catheters (compatible with particulate embolic agents e.g., pva particles) selective infusion micro catheters (compatible with particulate embolic agents e.g., pva particles relatively wide inner id 140-150cm long, distal tips-2f,, distal tips-2.2f,, distal tips-3f,, distal tips-4f, delivery microcatheter proximal od 2.95 for distal od 2.6fr 0.025 id with 160cm long compatible with reperfusion catheters, two tipped micro-catheter compatible with dmso/gluecompatible with dmso/glue, atraumatic microguide wires with torque device for use with micro catheter: sizes: 0.007 & 0.008 lengths: 150-180cms should have soft platinum floppy tip coating with hydrophilic polymer should have wires with varying degree of shaft support, sizes: 0.007 , sizes: 0.008 , atraumatic microguide wires with torque device for use with micro catheter: sizes: 0.010 , 0.012 lengths; 150-205cms should have soft platinum floppy tip coating with hydrophilic polymer should have wires with varying degree of shaft support specify the length of the distal radiopaque segment, 0.010 straight, 0.012 straight, 0.010 pre shape, 0.012 pre shape, atraumatic microguide wires with torque device for use with microcatheter size : 0.014 lengths; 150-205 cms, 215 cms should have soft platinum floppy tip coating with hydrophilic polymer, atraumatic microguide wires with torque device for use with microcatheter size: 0.018 , atraumatic microguide wires with torque device for use with microcatheter size: 0.014 extra support microfabricated nitinol distal hypo tube. two times more support than standard 0.014in guidewire superior tractability of large bore catheter easier to navigate through tortuosity, special atraumaticmicroguide wires with torque device for use with microcatheters: exchange lengths lengths; 260 300cms should have soft platinum floppy tip coating with hydrophilic polymer should have wires with varying degree of shaft support specify the length of the distal radiopaque segment hypo tube, sizes: - 0.010,, sizes: - 0.014 ,, sizes: - 0.018 , special microguide wire docking device- 0.010 /0.014 should allow easy introduction of guide wire into catheters docking device should have features to secure firmly in the operative field should have slits to hold the guide wire for single operator procedure specify the length, electrolytic detachable coils for intracranial aneurysm treatment: latest generation platinum coils sizes (diameter): all sizes available in the range lengths: regular and long lengths shapes: helical, 2d, 3d, complex soft and regular hand held detachment system, regular sizes, nano sizes, large, instant electrothermally detachable coated/bioactive platinum coils

CTN :39629910

17 Mar, 2025 10.00 Crore

Jaipur - Rajasthan

Tender For neurovascular item for neurosurgery deptt.-, super-selective high flow infusion catheters for cerebral/spinal avms (compatible with n-butyl cynoacrylates)- flow guided , , 150-180 cm long , , graded shaft stiffness , , should be compatible with 0.007, 0.008, 0.010"micro guide wire , , should have three segments , , 1.2f , , 1.5f , , 1.8f , , one tip marker microcatheter, 167 cm , , hybrid braided catheter for liquid embolic injection , , coil reinforced and braid reinforced , , 0.0165/0.013 inch id, 0.014" compatible guidewire , , dmso compatible , , 2.1f proximal od, 1.3f distal od , , super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) with , , detachable tips , , 150-180 cm long , , graded shaft stiffness , , should be compatible with 0 007, 0.008, 0.009, , , 0.010" micro guide wire , , should have multi-segmented construction , , specify hydrophilic coating , , specify detachment mechanism , , 1.2f , , 1.5f , , 1.8f , , 1.2 f with combined packing of catheter and compatible wire , , 1. 5 f with combined packing of catheter and compatible wire , , super-selective high flow infusion catheters for cerebral/spinal avms (compatible with dmso) without detachable tips , , 150-180 cm long , , graded shaft stiffness , , should be compatible with 0.007,0.008, 0.009-inch micro guide wire , , specify hydrophilic coating , , 1.2f, , , 1.3f, , , 1.5f, , , 1.8f, , , selective infusion micro catheters (compatible win , , particulate embolic agents e.g., pva particles) , , selective infusion micro catheters (compatible with particulate embolic agents e.g., pva particles , , relatively wide inner id , , 140-150cm long , , distal tips-2f, , , distal tips-2.2f, , , distal tips-3f, , , distal tips-4f , , delivery microcatheter , , proximal od 2.95 for distal od 2.6fr , , 0.025" id with 160cm long , , compatible with reperfusion catheters , , two tipped micro-catheter compatible with , , dmso/glue , , compatible with dmso/glue , , atraumatic microguide wires with torque device for use with micro catheter: sizes: 0.007" & 0.008" , , lengths: 150-180cms , , should have soft platinum floppy tip , , coating with hydrophilic polymer , , should have wires with varying degree of shaft support , , sizes: 0.007" , , sizes: 0.008" , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 2

Central Government/Public Sector

CTN :39605744

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil

corporations/Associations/Others

CTN :39606340

28 Mar, 2025 8.78 Lacs

Delhi - Delhi

Tender For supply of cpvc item - brass reducer tee15x15x15mm , brass reducer tee 20x20x15mm , reducer brass coupling 20x15mm , expansion loop 15mm nominal dia , end plug 15mm nominal dia , pipe clamp heavy saddle with powder coating 15mm nominal dia , solvent for jointing of pipes and fittings with one step cpvc solvent cement of 118ml tin is 14182 1994 , teflon tape thread seal 19mm wide for jointing of pipes and fittings

Iccp System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others