Latest identification board Tenders | Government identification board Tenders

CTN :38021574

18 Dec, 2024 NA

Nagpur - Maharashtra

Tender For bid to ras bid to ras bid to ras corrigendum : supply of acrylic board - rdc champion board , governor felicitation board , direction board , glimpass board , ncc logo plates , fire logo plates , mcb plates , fevibond , mirror acrylic , unity and discipline board

State Government

CTN :38594431

23 Dec, 2024 3.20 Lacs

Prayagraj - Uttar Pradesh

Tender For fabrication and grouting of fire hut supply and fixing of equipment display board, supply fixing and fabrication of direction indicator along with installation of cctv camera at 132 kv substation hetapatti, under electy. trans. division-i, prayagraj.

Central Government And Public Sector

CTN :38587105

03 Jan, 2025 NA

Guntur - Andhra Pradesh

Tender For supply of granite bench and direction sign board at archaeological monument

CTN :38589611

03 Jan, 2025 16.90 Lacs

Jammu - Jammu And Kashmir

Tender For supply of hose assy,hose assy,hose assy,hose assy,hose case drain,hose assy,hose assy,solenoid brake valve,control lever vertical assy,control lever w a lh,control lever w a rh,gaiter,spring,plate lh,plate rh 3h0150,auxiliary cable,rubber bush,rubber pad,rubber beeding,front glass top roof glass,front cab bush,panel board lh,panel board rh,console lh,console rh,rubber beeding,cab lifting pump,hose assy,hose clip jubilee clamp,hose assy,benjo bolt,seat assy,m8 hex screw l 20,m6 hex head bolt l220,restrant bar foam,switch restrant bar,sight glass,packing ring copper washer,dowts seal,rubber cap,special bolt door,grease nipple m10,direction indicator light,head light work lamp,horn,hour meter,dummy switch,front wiper switch,internal light switch cabin light,dual indicator hyd clig fuel filter,fan switch,hyd oil temp gauge,water temp gauge,work light switch,beacon light switch,parking brake switch,dual indicator battery heater glow,dual indicator water temp oil pressure,fuel gauge,4 way ignition switch,cabin harness for sk

corporations/Associations/Others

CTN :38542922

31 Dec, 2024 38.55 Lacs

Agra - Uttar Pradesh

Tender For construction of main gate, direction board and other repair work at epip agra.

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

State Government

CTN :38539640

20 Dec, 2024 NA

North 24 Paragana - West Bengal

Tender For preparation of concept design and presentation of theme for exhibition rooms of interpretation center consisting of proposal for mural work diorama wall mounting ceiling installation direction board etc in connection with utsadhara project

CTN :38421325

20 Dec, 2024 20.00 Lacs

South Tripura - Tripura

Tender For supply of hardware items- supply of all kinds of hardware items for different construction work under rd satchand division during the year 2024-25 isi marked butt hinges in/c screw-100x58x1.90mm(mowjee/equivalent brand), isi marked butthinges in/c screw -75x47x1.70mm (mowjee/equivalent brand), isi marked butthinges in/c screw -50x37x1.50mm(mowjee/equivalent brand), isi marked door window handle 125mm(heavy quality)in/cscrewanodized steel (mowjee / equivalent brand), isi marked door window handle 125mm(heavy quality)in/cscrewaluminum (mowjee / equivalent brand), isimarkedm.s.slidingdoorbolt-300x16mm(mowjee/equivalent brand), isi marked m.s.sliding door bolt - 250x16mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-200x10mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-150x10mm(mowjee/equivalent brand), isimarkedtowerbolt-barreltype-100x10mm(mowjee/equivalent brand), hooks & eyes-200 mm long, hooks & eyes-150 mm long, isi marked parliamentary hinges with screw-(125x125x27x2.8)mm(mowjee / equivalent brand), isi marked parliamentary hinges with screw- (75x100x20x2.24)mm(mowjee / equivalent brand), m.s. ring (50mm dia), black iron wire, gi wire (22 swg), coir rope, gi plain sheet (0.3 mm thick), chicken net of 1st category, pvc mosquito net of 1st category, nails-upto 1//long, nails-upto 1// to 2//long, nails-above 2//long, holding down bolt (16 mm), m.s. hold fast, barbed wire (9.38 kg / sqm), giwire(suitable for filter,20mm swg weaves with 4nos per25mm in both direction), hollow square pipe (25 mm x 25 mm) of standard specification., joint bolt 40 mm, joint bolt 25 mm, m.s. fan clamp (16 mm dia), polythene, steel handle cum fixer with necessary fittings for steel window., j hook 6 mm dia fitted to 40 mm dia pipe, j hook 6 mm dia fitted to 32 mm dia pipe, cc jail, ms fan light pivot, iron gumla, velcha, iron bucket, hacksaw blade, hacksaw frame, board pin, dhari mat (1.37m x 1.83 m), gi screw, door lock link( upto 50 mm width / dia), door lock (link)( more than 50 mm width / dia), plain glass (3 mm thick), plain glass (4 mm thick), plain glass (6 mm thick), colouring glass with shade (3 mm thick), colouring glass with shade (4 mm thick), one way colouring glass (3 mm thick), one way colouring glass (4 mm thick), one way colouring glass (5 mm thick), one way colouring glass (6 mm thick), glass panes (frosted) 3mm thick and 25 mm width for tiles fitting., glass panes (frosted) 4mm thick and 25 mm width for tiles fitting.

Central Government And Public Sector

CTN :38292574

19 Dec, 2024 68.32 Lacs

Angul - Odisha

Tender For providing of custom bid for services - ustom bid for services -enabling contract for erection & commissioning of ba/bb board for unit # 3 & unit # 6 (mc-5261)- item 1 dismantling & removal ba: dismantling and removal of existing installation of floor mounted cubical type 6.6 kv, 3 phase, 50 hz, vacuum circuit breaker ba board containing 16 nos breaker panel, and approximate size 14000 mm x 2150 mm x 2800 mm (lxdxh) at ei. 7.5 mtr in unit switchgear room at electrical annex building of power house. all the scrap generated from this is to be shifted to the designated place at scrap yard as per the direction of the mic. 2.00 set, item 2 dismantling & removal bb: dismantling and removal of existing installation of floor mounted cubical type 6.6 kv, 3 phase, 50 hz, vacuum circuit breaker bb board containing 17 nos breaker panel, and approximate size 14500 mm x 2150 mm x 2800 mm (lxdxh) at ei. 7.5 mtr in unit switchgear room at electrical annex building of power house. all the scrap generated from this is to be shifted to the designated place at scrap yard as per the direction of the mic. 2.00 set, item 3 installation including issue-ba: installation including issue from nalco s store, transportation to erection site, storage at site, erection of floor mounted cubical type 6.6 kv, 3 phase, 50 hz, vacuum circuit breaker ba board containing 16 nos breaker panel, and approximate size 14000 mm x 2150 mm x 2800 mm (lxdxh) at ei. 7.5 mtr in unit switchgear room at electrical annex building of power house including supply of all erection accessories and consumable etc for complete and satisfactory installation of the switchboard in all respect.testing of all the 6.6kv panels including ct, pt, breakers, spds, logics and interlocks, auxiliary relays, numerical relays, cables(both ht and lt) 2.00 set, item 4 installation including issue-bb: "installation including issue from nalco s store, transportation to erection site, storage at site, erection of floor mounted cubical type 6.6 kv, 3 phase, 50 hz vacuum circuit breaker bb board containing 17 nos breaker panel, and approximate size 14500 mm x 2150 mm x 2800 mm (lxdxh) at ei. 7.5 mtr in unit switchgear room at electrical annex building of power house including supply of all erection accessories and consumable etc for complete and satisfactory installation of the switchboard in all respect.. testing of all the 6.6kv panels including ct, pt, breakers, spds, logics and interlocks, auxiliary relays, numerical relays, cables(both ht and lt) 2.00 set, item 5 dismantling of 6.6kv 3cx185 sqmm: dismantling of 6.6 kv (ue) grade xlpe insulated, armoured, aluminium conductor frls cables of following sizes on cable trays at cable trench/structures after removal of clamps, trefoil clamps etc. the cables shall be kept properly at the designated place as per the direction of mic and later hand over the same at the central store scrap yard. 3cx185 xlpe cable 3000.00 meter, item 6 dismantling of 6.6kv 1x500m: dismantling of 6.6 kv (ue) grade xlpe insulated, armoured, aluminium conductor frls cables of following sizes on cable trays at cable trench / structures after removal of clamps, trefoil clamps etc. the cables shall be kept properly at the designated place as per the direction of mic and later hand over the same at the central store scrap yard. 1cx500 xlpe cable 2500.00 meter, item 7 cable laying including issue 3cx185sqmm: cable laying including issue from nalco s store, transportation to erection site, storage at site of 6.6 kv (ue) grade xlpe insulated, armoured, aluminium conductor frls cables of following sizes on cable trays in cable trench/structures including supply of cable installation accessories viz clamps, trefoil clamps, nylon ties, identification tags, hooks, saddles, spaces, rawl plugs, anchor fasteners, bolts, nuts, washers, sealing materials for pipe sleeves, etc and all other consumable materials to render the system complete in all respect. 3cx185 sqmm xlpe cable. 3000

Identification Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

corporations/Associations/Others

State Government

Central Government And Public Sector