Web Analytics Made Easy - StatCounter

Industrial Facility Tenders

Get complete information related to latest Industrial Facility Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Industrial Facility Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Industrial Facility Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

corporations/Associations/Others

CTN :43711148 Due date: 28 Feb, 202628 Feb, 2026 18.57 Lacs
Tender For corrigendum : tender for supply of water proofing and repair maintenance of alimco pmdk building : : -demolishing mud phaska lime terracing in roof , dismantling old plaster or skirting raking out joints and cleaning the surface , providing and laying integral cement based water proofing treatment , providing and fixing on wall face unplasticised rigid pvc rain water pipes , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete , 15 mm cement plaster , structural steel work riveted bolted or welded in built up sections trusses , providing and fixing precoated galvanised iron profile sheets , providing and fixing ms grills of required pattern in frames of windows , renewing glass panes with putty and nails , reparing and maintenance of window with fabrication of damaged work , providing and fixing isi marked flush door shutters , providing & fixing decorative high pressure laminated sheet of plain , providing and fixing stainless steel sliding door bolts , providing and fixing stainless steel handle , providing and fixing stainless steel tower bolts , providing and fixing stainless steel door stopper , repair and maintencace of flush door shutter and chowkhat , repair and maintencace of m s channel at entrance , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , painting with synthetic of required colour to give an even shade , chequerred precast cement concrete tiles 22 mm thick in footpath , making plinth protection 50mm thick of cement concrete , brick work with common burnt clay fps , providing and laying in position specified grade of reinforced cement concrete , providing and fixing gi chicken wire mesh 24 gauge , taking out doors windows and clerestory window shutters , providing and laying anti skid ceramic glazed floor tiles , dismantling old plaster or skirting raking out joints and cleaning the surface , 12 15 mm thick plaster of 1 4 cement , coarse sand with water proofing compound , removing dry or oil bound distemper , water proofing cement paint , providing and applying white cement based putty of average thickness 1 mm , distempering with 1st quality acrylic distemper , finishing walls with acrylic smooth exterior paint of required shade , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , wiring for light point fan point exhaust fan point call bell point , wiring for group controlled looped light point fan point exhaust fan point call bell point , supply and fixing of 1200 mm ceiling fan with fan regulator , supply of pvc body brisk air exhaust fan , supplying and drawing following sizes of frls pvc insulated copper conductor 3x2 5 sq mm , supplying and drawing following sizes of frls pvc insulated copper conductor 3x4 sq mm , supplying and fixing gi box with modular plate 6 pin 5 6 and 15 16 a modular socket , fixing 25a modular socket outlet and 25a modular sp mcb c , supplying and fixing following way horizontal type three pole and neutral , supplying and faing 5 a to 32 rating 240 41 5 v 10ka c curve , supplying and fixing following rating four pole 415 v , supply and installation of 22 watt led batten and other accessories

CTN :44163340 Due date: 04 Mar, 202604 Mar, 2026 NA
Tender For supply of oil filter,fan belt 1171,belt accessory drive,air filter,element kit fuel filter,filter particle climate control,maximile ultra v4 1 l,ac water pump belt,scorpio m and m servicing with labour charge,repair and servicing work for tata storme oil change filter wash elect wiring cheeking and repair work,fogging machine repair with labour charge,self starter assy repair,repair of welding work body denting tail side repair roof repair new ms sheet welding and work with labour charge

CTN :44092846 Due date: 28 Feb, 202628 Feb, 2026 NA
Tender For providing of facility management service- manpower based (version 2) - industrial; facility management; semi-skilled,facility management service- manpower based (version 2) - industrial; facility management; skilled,facility management service- manpower based (version 2) - industrial; facility management; highly-skilled

CTN :44092956 Due date: 28 Feb, 202628 Feb, 2026 NA
Tender For providing of facility management service- manpower based (version 2) - industrial; facility management; unskilled

Central Government/Public Sector

CTN :44090920 Due date: 20 Mar, 202620 Mar, 2026 1.50 Lacs
Tender For providing of repair and overhauling service - repair & maintainance; unbranded; no; buyer premises, service provider premises - aer hp air system line moisture and oil separator body cracked. to be repaired. inway job includes removal/re-fitment of pipeline, welding and renewal of gaskets. mat: aluminium. aer, fer and amr hp air system line moisture and oil separator drain cocks (06 nos) not operating due to deterioration and corrosion. drain cocks to be renewed as per sample and overhauled for satisfactory operation. inway job includes removal/re-fitment of pipeline, strainer cleaning and renewal of gaskets. rexin cover of sofa sets, chairs of engineering office and mcr discolored, deteriorated and perished. to be renewed as per sample. material: rexin, area: 20 sq ft, sofa set: 03 nos, chairs: 07 nos channel of sliding rack in heavy engineering store damaged. to be renewed as per sample. material: ss, length: 18". tray to be fabricated for collection and drainage of condensate water below both ac compressors in amr. qty: 02 nos, material: gi sheet, dimensions: 3ft * 2ft * 1/4 ft.

CTN :44045315 Due date: 26 Feb, 202626 Feb, 2026 NA
Tender For supply of permanent cold patch material packed in 25 kg poly bag suitable for pot holes repair of bitumen surfaces. , sink stainless steel with drain board over all size 810mmx510mmx203mm , low level cistern pvc 10 ltr cap , hydraulic door closer cast iron non porous , looking mirror for bathroom size 600mmx450mmx5mm thick glass be mounted on acrylic sheet 3mm thick , plastic seat cover for wc white , bathroom mirror cabinet of size 522mm x 350mm , ptmt float valve 20 mm , cp toilet paper holder , multi polyplus one mtr width x 20 mtr length x 0. 80 mm or 2 mm thick roll 90 micron hmhdpe film , bath room corner glass shelves 9inch , pvc connection pipe with cp nuts 18inch , cp towel ring , delinator abs round body , gate valve brass 15 mm , shelf acrylic 13inches long and 4inches width , pvc connection pipe with cp nuts 12inch , pvc connection pipe with cp nuts 24inch , cp towel rack 600 mm , pvc water storage tank 500 ltr capacity , pvc water storage tank 1000 ltr capacity , cp towel rail with bracket 600 mm length , bath room corner glass shelves 12inch , bath room glass shelves 18inch , bib cock ptmt 15mm , bath room corner glass shelves 24inch , float valve pvc 15mm , ply wood commercial bwr of size 8 feet x 4 feet x6mm thick , looking mirror 48inches x15inches x 5mm , paint road marking white , pvc waste pipe flexible 32mm x 800 mm , ptmt towel rail 24 inch , galvanised steel wire cloth 0. 45 or 0. 5mm nominal dia of wire , cp urinal spreader 15mm , helical door spring size 150 mm , sliding door bolt 200mm aluminium , ptmt toilet paper holder , ptmt jet spray with fitting , pvc waste pipe flexible 40mm x 800 mm , paint synthic enamel smoke grey , ptmt pillar cock 15mm , paint synthetic enamel white , tower bolt aluminium 200mm , ptmt stop cock 15mm , tarpentine oil , ptmt stop cock 20 mm , hasp and stapple 100mm , hasp and stapple 75mm , bow handle aluminium 150mm //bid details2 / 41

Central Government/Public Sector

CTN :43716254 Due date: 27 Feb, 202627 Feb, 2026 46.35 Lacs
Tender For corrigendum : special repair to building no. t-58 at gta, development of water body in adjoining areas of 68 engr regt, provn of deficient e/m appliances in certain md accn at zone 7 and washroom to building no. p-10 at naa under ge (n) tezpur

Central Government/Public Sector

CTN :43974932 Due date: 24 Feb, 202624 Feb, 2026 3.30 Lacs
Tender For repair n maintenance of the hydraulic man lifter regd no od35e8795 and repairing of engine water pump, tie rod, uj cross, diesel filter etc of bs iv full body vehicle regd no od35d3983 tata truck of enm dept, aocp, ja

Central Government And Public Sector

CTN :43830591 Due date: 24 Feb, 202624 Feb, 2026 16.83 Lacs
Tender For procurement of consumables for repair and maintenance of hm equipment, electrical installations - single core control cable (copper) size 1.5 sqmm, 7 core, 2.5 sqmm, copper conductor pvc, insulated, unarmoured control cables 1.1 kv, pvc conduit 25 mm dia, pvc insulated aluminium conductor 2 core 16, sqmm, pvc bend 25mm, pvc clamp ( u - type), pvc junction box (four way) size 1 inch, pvc switch board (box type) 7x4, pvc switch board ( box type) 8 x 10, 5a switch ,type-modular, 5a/6a socket modular, 15a/16a switch modular, 15a/16a socket modular, pvc flexible conduit pipe 1", ceiling rose, angle holder (for r b-22 pin type lamp), led bulb/lamp 15w pin type, led flood light, 100 w, led street lights 70 watt, pvc gitti 35 mm, ms screw 35mm, pvc insulation tape, cable tie 200mm, aluminium lug 25 mm2, cable lugs, 35 sq.mm., aluminium cable lugs 70 sq. mm, aluminium cable lugs 95 sq. mm, aluminium cable lugs 120 sq. mm, pvc insulated aluminium conductor unarmoured, flat cable, 2 core, 10.0 sq.mm., 1.1 kv grade., pvc switch board(6x8), waterproof tape, hose clamp, drop out fuse element for 11 kv, drill bit sds plus 6 mm, drill bit sds plus 8 mm, drill bit sds plus 10 mm, hss drill bits, 6mm, hss drill bits, 8mm, hss drill bits, 10mm, elect. energy meter, single phase with lcd, display,lt direct connected, heat piller rod with steel holder & glass, hot air gun, power input- 2000w, 240v, pvc insulated and sheathed copper control, cable 4 core x 6 sq mm, changeover switch, 200a, 415v, glass fuse 5.0 amp, magnetic nut driver set (5-13 mm), 3 pole mpcb ,ac-3 duty,o/l setting range 4-, 6.3a,1no+1nc aux.contact, mcb sp c curve 6 amp, sp-mcb 'c' curve,10a, ac, mcb dp c curve 32 amp, mcb 4p c curve 32 amp, mcb 4p c curve 63 amp, pvc cable clip 10 mm, hex hd cap screw 50 mm length, hexagonal head screw 25 mm length, aluminium thimble/ lugs, 50 sqmm, aluminum lugs, 150sqmm, lugs big size 35 sqmm, lugs big size 50 sqmm, lugs big size 70 sqmm, lugs big size 120 sqmm, ss hinge for generator canopy, panel door lock, pin type, silicon spray, generator canopy door lock steel, drill chuck with key, rubber suction hose pipe 4 inch, hose connector 4 inch, phase sequence relay 415 volt ac, star-delta timer, 240v ac, dp-mcb 'c' curve, 10a, ac, aluminium conductor cable 2c,6sqmm, garden light 15 w, stay wire, gi wire used for supprt of 11 kv line, poles., stay set complete with gi rod, gi nut,gi anchor, plate,elbow/turn buckel., track spot light, pillar heater 3 pcs switch set, emergency led bulb (12 w), heater rod, pvc casing and caping 32 mm, casing pins, drill bit sds plus 12 mm, drill bit sds plus 16 mm, metal drill bit 6.5mm, coupling nut & bolt with rubber bush and spring, washer-85mmx16mm, angle grinder, 100 mm, welding goggles (black), safety goggles, digital clamp on meter for dc and ac current, meas. 0-1000a ,auto rang,lcd display, ac/dc v. 0-, 1000v, acsr conductor (rabbit), screw driver set, precision screw driver set, combination pliers 210 mm, line tester length 125mm, utility knife 19 mm blade, multimeter, gi bolt m16,length - 8 inches with nut and double, washer,half threaded, timer for street light, m.s. angle, ms pipe dia 40 mm, anchor fastener m12, m s flat 50x5mm, power contactor, magnifying glass, plum bob, bottom rubber seal (20 x 100 x 5200), top rubber seal (14 x 180 x 4500), top corner rubber seal (1set = 1l + 1r, teflon, cladded) (14 x 360 x 370 ), vaccum cleaner-suction power-2150mm of water, column, roller bearing, guide roller body/wheel as per enclosed, drawing (bhaled intake gate), guide roller body/wheel as per enclosed, drawing (dt service gate), tool kit belt, bearing 23040 for service gate sheave assembly, insect killer, cordless call bell, led beacon light
 Loading, Please wait...

Connect us via What's Up