Latest infrastructure alarm machine Tenders | Government infrastructure alarm machine Tenders

Central Government And Public Sector

CTN :38601153

30 Dec, 2024 NA

Delhi - Delhi

Tender For supply of sitc of micro processor based intelligent addressable main fire alarm panel central processing unit , sitc analog addressable photo-thermal detector , sitc of intelligent addressable thermal detector , sitc of addressable manual call point , sitc of addressable fire control module , sitc of addressable horn cum strobe , sitc of fault isolator , sitc of response indicator on surface recessed ms box , sitc of intelligent analog addressable type monitor modules , wiring for fire alarm system , 4 x 1.5 sq.mm , dismantling of the existing fire detectionand alarm system

CTN :38476287

26 Dec, 2024 11.48 Lacs

Multi City - Multi State

Tender For invitation of quotation for supply of cat b stores - ac motor 3 phase 415v 1hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 2hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 3hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 5hp, 1420 rpm make: hindustan/delta, ac motor 3 phase 415v 7hp make: hindustan/delta, ac motor 3 phase 415v 7.5hp make: hindustan/delta, ac motor 3 phase 415v 15hp make: hindustan/delta, ac motor 3 phase 415v 30hp make: hindustan/delta, ac motor 3 phase 415v 40hp make: hindustan/delta, ac motor 3 phase 415v 3hp with water pump, ac motor 3 phase 415v 3hp 2800 rmp, tyre inflator-led double display with following specification:- (a) led display to indicate set and measured tyre pressure. vandal proof, ip-65 rated front panel metal buttons. (b) multi unit measurement facility-psi, kpa, bar and kgcm. (c) fail-safe circuitry to prevent air leakage, if sensor fails. (d) electronically adjustable screen brightness. (e) loud buzzer alarm system to alert the user about errors and when inflation is complete. (f) measurement range: 0-150 psi. (g) minimum tire pressure to start inflation: 5 psi. (h) resolution: 1 psi. (j) accuracy: +/-1 psi. (k) operating environment-50 to 65 c. 95% rh. (1) display: 3" x 3" led display. (m) power supply: 220v ac, 60 hz, single phase. (n) dimensions (only functional module) 8" x 8" x 4.5" mm (approx). double acting, reciprocating, high pressure air compressor with following specifications:- (a) max pressure: 175 psi (b) air tank capacity: 300 l (c) fad (cfm): 28.00 (d) electric motor & fittings -10 hp, 3 phase. high pressure car washer-3hp, 1ph. minimum technical specification:-

Central Government/Public Sector

CTN :38583382

26 Dec, 2024 NA

Multi City - Multi State

Tender For supply of smoke detector unit and fire alarm system complete with all accessories, 110 v dc conforming to rcf specification no edts-087 rev-'b' with corr-1, suitable for lhb type and other power cars; make:-integ, agni, precision only.

CTN :38586319

24 Dec, 2024 NA

Tiruvallur - Tamil Nadu

Tender For supply of alarm signalling unit bac-6a assy bac6 000ty / bac6a. 000cb

Central Government/Public Sector

CTN :38583126

11 Jan, 2025 NA

Mumbai - Maharashtra

Tender For supply of charging unit to sanrok part no. 2ed-254-3523 for automatic smoke/fire detection with alarm system.

Central Government / Public Sector

CTN :38518143

20 Dec, 2024 39.40 Lacs

Haldia - West Bengal

Tender For providing of custom bid for services - 9040c24c79 servicing and maintenance of honeywell internationali pvt ltd make fire detection alarm fda system installed at various locations under dyip unit area in iocl haldia refinery

Central Government/Public Sector

CTN :38537749

03 Jan, 2025 NA

Multi City - Multi State

Tender For work of stripping & fitment of air spring assembly & painting of its identification plate, stripping & fitment of brake caliper unit, brake emergency alarm pull box, isolating cock, non return valve, fiba unit of lhb coaches and provision of additional dirt collector in bp line before fiba devise in lhb coaches at jagadhari workshop northern railway for two year

CTN :38245441

19 Dec, 2024 42.21 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spares for ece make elevators installed in main plant for unit 5 and 6 csctpp, chhabra - a. common items, rccb 32 amp 3 pole for controler, cop single digit display with pcb, cop double digit display with pcb, transformer 500va input415 output 220/90/20 volt, brake liners for tm 40 machine (set), lop button up with pcb industrial type, lop button dn with pcb industrial type, lop set up and down industrial type (size 287mm x 98mm), lop set up and dn with pcb slim type (size 287mm x 98mm), lop button up with pcb slim type, lop button dn with pcb slim type, lop double digit pcb, lop single digit display with pcb, cop button slim type mark g, 1,2,3, do dc button industrial type, do dc button slim type, fan switch industrial type, fan switch slim type, auto / attendant key switch slim type, door track roller size 48 mm dia and 14 mm, eccentric roller size 48 mm dia and 14 mm, door beak roller size 48 mm dia and 14 mm, door guide shoe, reed switch fin type, door sensor complete set, dbr for 15 kw vfd, guide shoe liner - 16 mm, guide shoe liner - 10 mm, cwt guide shoe - 10 mm, alarm pcb complete set, coupler sket lh csk-vf00.ci000 skate set automatic horizontal sliding car door model 40/10 vf, capacitor 470 mfd, d locking key, magnet brake coil ( type: tmb-490, volt 80 dc,amp: 3.6a insu;lation type: class f), fermator motor drive (make:- fermator, model no:- cvf-vf4ac0000), fermator motor (make: fermator,type 125/40, model: yvp90-6s voltage 230v, freq: 50hz rpm: 900), fermator door drive belt, car fan dia 300 mm, car fan grill size 365 x 365 mm, door lock contact male and female (make:- fermator, model no:-005546, 1a, 230 vac, 50/60 hz, 200vdc ), limit switch with lever roller type with no/nc contact limit switch 2 amp and 110 dc, door drive pulley (single teeth), synchrimision rope, bmo pcb, vmvf2 card, pfard card, vfvr2b assy card, apcld card, apex-1 card, apex-2 card, ard for 4 floor, car door track 800 mm opening, car door track 1000 mm opening, landing door track 800 mm opening, landing door track 1000 mm opening, osg 8mm rope breaking strength of rope 69kn desighn factor of safety 13.98, osg set for 8mm rope, osg set for 6mm rope, b. service building lift requirement (nrj 2630), vfvr1 card, inverter board for adcon ard, kds controller mother board, c. boilrt-5 lift requirement(nrj 2434), coupler sket rh, ard for 11 floor, controller card, d. boilrt-6 lift requirement(nrj 2435), bridge rectifier 3512, arl-300 lite card, fixed contact assy. 1a/110 v, moving contact assy 1a/110 v, concentric roller fermator, cam arrangement (pickup) pm lh fermator( lh rh coupler), micro switch mtpc-27, fermator motor, reed switch pencil type with led, fermator door driver belt, ard for 11 floor, e. jnt-1 lift (g+3), vfvr1 card, inverter board for adcon ard, kds controller mother board, coupler sket rh, ard for 4 floor, reed switch pencil type, f. sch-1 lift (g+6), vfvr1 card, inverter board for adcon ard, kds controller mother board, coupler sket rh, ard for 7 floor, reed switch pencil type, g. jnt-21 lift (g+3), controller for g+3, cop for g+3, lop, normal inspection box, reed switch, limit cut angle, magnet, vfd main drive, h. sch-21 lift (g+6), controller for g+6, cop for g+6, lop, normal inspection box, reed switch, limit cut angle, magnet, vfd main drive

CTN :38211280

18 Dec, 2024 42.21 Lacs

Baran - Rajasthan

Tender For corrigendum : supply of spares for ece make elevators installed in main plant for unit 5 and 6 csctpp, chhabra- rccb 32 amp 3 pole for controler, cop single digit display with pcb, cop double digit display with pcb, transformer 500va input415 output, 220/90/20 volt, brake liners for tm 40 machine (set), lop button up with pcb industrial type, lop button dn with pcb industrial type, lop set up and down, industrial type (size 287mm x, 98mm), lop set up and dn with pcb slim, type (size 287mm x 98mm), lop button up with pcb slim type, lop button dn with pcb slim type, lop double digit pcb, lop single digit display with pcb, cop button slim type mark g, 1,2,3, do dc button industrial type, do dc button slim type, fan switch industrial type, fan switch slim type, auto / attendant key switch slim type, door track roller size 48 mm dia and 14, mm, eccentric roller size 48 mm dia and 14, mm, door beak roller size 48 mm dia and 14, mm, door guide shoe, reed switch fin type, door sensor complete set, dbr for 15 kw vfd, guide shoe liner - 16 mm, guide shoe liner - 10 mm, cwt guide shoe - 10 mm, alarm pcb complete set, coupler sket lh csk-vf00.ci000 skate set, automatic horizontal sliding car door, model 40/10 vf, capacitor 470 mfd, d locking key, magnet brake coil ( type: tmb-490,, volt 80 dc,amp: 3.6a insu;lation type:, class f), fermator motor drive (make:- fermator,, model no:- cvf-vf4ac0000), fermator motor (make: fermator,type, 125/40, model: yvp90-6s voltage, 230v, freq: 50hz rpm: 900), fermator door drive belt, car fan dia 300 mm, car fan grill size 365 x 365 mm, door lock contact male and female, (make:- fermator, model no:-005546, 1a,, 230 vac, 50/60 hz, 200vdc ), limit switch with lever roller type with, no/nc contact limit switch 2 amp and, 110 dc, door drive pulley (single teeth), synchrimision rope, bmo pcb, vmvf2 card, pfard card, vfvr2b assy card, apcld card, apex-1 card, apex-2 card, ard for 4 floor, car door track 800 mm opening, car door track 1000 mm opening, landing door track 800 mm opening, landing door track 1000 mm opening, osg 8mm rope breaking strength of rope, 69kn desighn factor of safety 13.98, osg set for 8mm rope, osg set for 6mm rope, service building lift requirement (nrj, vfvr1 card, inverter board for adcon ard, kds controller mother board, boilrt-5 lift requirement(nrj, coupler sket rh, ard for 11 floor, controller card, boilrt-6 lift requirement(nrj, bridge rectifier 3512, arl-300 lite card, fixed contact assy. 1a/110 v, moving contact assy 1a/110 v, concentric roller fermator, cam arrangement (pickup) pm lh, fermator( lh rh coupler), micro switch mtpc-27, fermator motor, reed switch pencil type with led, fermator door driver belt, ard for 11 floor, jnt-1 lift (g+3), vfvr1 card, inverter board for adcon ard, kds controller mother board, coupler sket rh, ard for 4 floor, reed switch pencil type, sch-1 lift (g+6), vfvr1 card, inverter board for adcon ard, kds controller mother board, coupler sket rh, ard for 7 floor, reed switch pencil type, jnt-21 lift (g+3), controller for g+3, cop for g+3, lop, normal inspection box, reed switch, limit cut angle, magnet, vfd main drive, controller for g+6, cop for g+6, lop, normal inspection box, reed switch, limit cut angle, magnet, vfd main drive

CTN :38499251

20 Dec, 2024 62.65 Lacs

Delhi - Delhi

Tender For construction of super specialty block (3 basements ground floor 11 upper floors and helipad on terrace floor) in rml hospital complex, new delhi including main building works, water supply, sanitary installation, internal electrical installations, lifts, firefighting system , automatic fire alarm system, air-conditioning system, advance health care services, development and bulk services and horticulture works. (sh: providing 20kl lmo unit)subwork/packages:providing 20kl lmo unit

Infrastructure Alarm Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector