Latest infrastructure service Tenders | Government infrastructure service Tenders

State Government

CTN :42813292

15 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :42984788

16 Dec, 2025 NA

Pithoragarh - Uttarakhand

Tender For corrigendum : supply of cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse confirming to , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , hard core of broken stone aggregate of size 45 to 63 mm , tmt steel bar 12mm dia , binding wire 20 gauge 0 point 9 mm annealed , pre cast pcc block type c1 , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8feet x 5feet , trowels as per isi mark , water level pipe 4mm 15 mtr long , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , gum boot , hand gloves rubber , drilling machine portabled , steel cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , portable generator set 5 kva , welding rod , welding goggles , welding gloves , portable concrete pump , 10 kl underground fol storage tank , columns , trusses , purlins , roof sheet , ms plate 5 mm thick , ms angle iron , self tapping screw 4 inch , self tapping screw 3 inch , industrial fuel transfer pump , electric wire 2 point 50 sqmm , modular switch and socket combination 05 amp , lightening conductor , pvc pipe 110 mm dia , pvc flexible hose water pipe 20 mm dia , gi elbow 20 mm , gi gate valve connector , gi socket 20 mm with thread , gi union 20 mm , fire extinguisher

CTN :43116244

24 Dec, 2025 NA

Jamnagar - Gujarat

Tender For supply of aluminium ladder , circular saw , impact hammer drill machine , hammer drill machine , angle grinder , tools bag , electric planner , digital analogue measuring , leaser distance meter , hacksaw frame , cutting plier , sledge stone breaker hammer , cold chisel octagonal , water pump plier , screw drivers , box wrench , magnetic spirit level with aluminium body , measuring tape , concrete drill bit

CTN :43033958

11 Dec, 2025 NA

Mahamayanagar - Uttar Pradesh

Tender For the work of shifting of line full deposite scheem at various place under edd-sadabad hathras. - safe carriage of following material from electricty store center hts to pit site of work through the kacha and pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.), 8.5/9 mtr. long pcc poles., 9/11 mtr. s.t. poles, acsr weasel conductor, earthing complete, shackle insulator, stay set complete, teoff channel, 33/11 kv pin insulator with pin, disc insulator with disc fitting, f bracket, 11 kv x-arm, 50/95/120 sqmm. ab cable, suspension clamp, dead end clamp, distribution box with clamp, pearcing connector, guarding angle with clamp, g.i wire 6/8/10 swg, neutral cum earth wire, cable jointing kit, 11 kv xlpe cable, 25 kva t/f, 63 kva t/f, 100 kva t/f, errection of following poles including cutting of kharanja/mettalic road/concrete portion while digging pit & complete h.t./l.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work., pcc poles 8.5/9 mtr., stp 9.0/11 mtr., errection and grouting of stays as per respo norms and as per direction of supervising engineer. grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost., fixing of earthing rod as per respo norms and as per direction of supervising engineer., safe installation of following new/repaired cousted t/f on newly constructed double pole in proper alignment direction & making all ht/lt connection., 25 kva t/f, 63 kva t/f, 100 kva t/f, laying, sagging and stringing and jumpering / binding etc. of new & old acsr weasal conductor / gi in 11 kv / lt lines as per respo manual and as per direction of supervising engineer., acsr weasal conductor, 50/95/120 sqmm. ab cable, xlpe cable, providing & fixing of following clamps, 11 kv x arms clamps for stp/pcc pole, nut,bolt & washer, 11 kv f clamp for stp/pcc pole, earthwire clamps, lt clamp with nut & bolt, cable jointing kit, cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer, guarding/reguarding of 11 kv line by laying, stringing, sagging and binding of 2 nos. parallel gi wire 6 swg after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (tillis) of gi wire at distance of 3 mtr., installation of extra t on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, t&p etc, required for proper completion of work. the "t" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material., dismentlling and removal of existing line from the various area, dismentlling of pole stp/pcc, back cartage, acsr weasel conductor scrap, iron scrap

CTN :43037356

11 Dec, 2025 NA

Mahamayanagar - Uttar Pradesh

Tender For the work of construction of line and other associate work under full deposite scheme at various place under eudd-hathras. - safe carriage of following material from electricty store center hts to pit site of work through the kacha and pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.), 8.5/9 mtr. long pcc poles., 9/11 mtr. s.t. poles, acsr weasel conductor, earthing complete, shackle insulator, stay set complete, teoff channel, 33/11 kv pin insulator with pin, disc insulator with disc fitting, f bracket, 11 kv x-arm, 50/95/120 sqmm. ab cable, suspension clamp, dead end clamp, distribution box with clamp, pearcing connector, guarding angle with clamp, g.i wire 6/8/10 swg, metering cubicle, ct-pt, 11 kv xlpe cable, 25 kva t/f, 63 kva t/f, 100 kva t/f, errection of following poles including cutting of kharanja/mettalic road/concrete portion while digging pit & complete h.t./l.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work., pcc poles 8.5/9 mtr., stp 9.0/11 mtr., errection and grouting of stays as per respo norms and as per direction of supervising engineer. grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost., fixing of earthing rod as per respo norms and as per direction of supervising engineer., safe installation of following new/repaired cousted t/f on newly constructed double pole in proper alignment direction & making all ht/lt connection., 25 kva t/f, 63 kva t/f, 100 kva t/f, fixing/ errection of following item, cost of labor, material and t&p which required for completion of work, teoff channel, 33/11 kv pin insulator with pin, disc insulator with disc fitting, f bracket, 11 kv x-arm, suspension clamp, dead end clamp, distribution box with clamp, pearcing connector, metering cubicle, ct-pt, laying, sagging and stringing and jumpering / binding etc. of new & old acsr weasal conductor / gi in 11 kv / lt lines as per respo manual and as per direction of supervising engineer., acsr weasal conductor, 50/95/120 sqmm. ab cable, xlpe cable, providing & fixing of following clamps, 11 kv x arms clamps for stp/pcc pole, nut,bolt & washer, 11 kv f clamp for stp/pcc pole, earthwire clamps, lt clamp with nut & bolt, cable jointing kit, cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer, guarding/reguarding of 11 kv line by laying, stringing, sagging and binding of 2 nos. parallel gi wire 6 swg after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (tillis) of gi wire at distance of 3 mtr., installation of extra t on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, t&p etc, required for proper completion of work. the "t" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material., dismentlling and removal of existing line from the various area, dismentlling of pole stp/pcc, back cartage, acsr weasel conductor scrap, iron scrap

CTN :43100691

17 Dec, 2025 8.48 Lacs

Multi City - Karnataka

Tender For supply of material for constuction of cc road in uluru village taluru gp at siriguppa talaku package 01 - crushed stone course aggregate 53 tqzur01ur01, granite metal 40 mm tqzur01, granite metal 20 mm tqzur01, gravel 2.36 mm bar murrum tqzur01, vibratory roller 8 tonne tqzur01, water tanker tqzur01, form work at 1 percent tqzur01, portland cement tqzur01, coarse sand zone iii tqzur01, broken stone aggregate 40 mm size tqzur01, broken granite metal 20 mm tqzur01, broken granite metal 10 mm tqzur01, polythene sheet 125 mm micron tqzur01, bitumen primer at 200 ml per joint for 23 joints tqzur01, bituminous sealant 800 ml per joint 23 joints tqzur01, de-bonding strips 3.75 m length into 10 mm width into 5mm thick cut out of rubber filler board or similar material including 5 percent wastage tqzur01, plasticizer bar super plasticizer tqzur01, joint filler board 20mm thick as per is 1838 4 into 3.75 into 0.200 3 sqm tqzur01, concrete mixer 0.4 bar 0.28 cum capacity tqzur01, needle vibrator tqzur01, screed vibrator tqzur01, plate vibrator tqzur01, concrete jiont cutting machine for initial and final cuts tqzur01, water tanker 6 kl capacity tqzur01, air compressor 1 hour initial add 1 hour final tqzur01, name board tqzur01

CTN :43116278

30 Dec, 2025 NA

Nagpur - Maharashtra

Tender For supply of excavation for foundation in earth, soils of all types, sand, gravel, soft murum , providing and laying in situ ready mix controlled grade of m 15 , providing and laying in situ ready mix controlled grade of m20 , providing and laying in situ ready mix m 30 , providing and laying in situ ready mix m 30 cement , providing and laying in situ ready mix m 30 controlled cement concrete , providing and laying in situ ready mix m 30 plain cement concrete , providing, cutting, bending, hooking, tying and laying in position tmt fe 500 , providing reinforced cement concrete crash barrier , providing and applying synthetic enamel paint to crash barrier , providing and laying of filter media with granular materials stone crushed aggregates , providing and laying weep holes of 100 mm dia , providing and laying in-situ m40 grade unreinforced plain cement , providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. , providing and laying filter material underneath pitching in slopes as per drawings and technical specifications etc. complete. , providing and laying pitching on slopes laid over prepared filter media , plain cement concrete 1 is to 3 is to 6 nominal mix in grouting appron , providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40kilogrameach complete as per drawings , back filling behind abutment, wing wall and return wall

CTN :43086738

26 Dec, 2025 6.38 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of nrlm shed av/58151 at sangankallu village - sn-painter class i, sn-add providing and removing scaffolding at 3percentage on labour, sn-white cement based putty at 2sqm kg at rs. 1050 per kgs, sn-add brush, putty, sand paper, roller at 5percentage on cost of paint, sn-add handling , loading and unloading at 1percentage on material, sn-add watering charges at 1 percentage on material, sn-plastic emulsion paint , sn-vitrified tiles 10 mm thick 600 x 600 mm, sn-adhesive for tiles, sn-grout for vitrified tiles, sn-spacers for vitrified tiles, sn-mason class i (with tools), sn-honnewood planks for panels 20 mm thick, sn-add cutting and other wastage 5precentage , sn-carpenter assistant, sn-add handling , loading and unloading at 2percentage on material, sn-mathi/nandi wood scantling, sn-mathi/nandi wood planks for panels 25 mm thick, sn-aluminium window frame section 1.20 mm thick, sn-nylon rollers, sn-rubber beading for shutters beading, sn-pvc beading, sn-alluminium tower bolt - 20 cm, sn-alluminium handles - 15 mm, sn-cleat angles, sn-chrominum plated screws, sn-5.50 mm thick plain glass, sn-add 15percentage wastage for glass, sn-fabricator, sn-add hom of welding and grinding machine at 2precentage on material, sn-portland cement, sn-coarse sand (zone iii), sn-mixer (concrete small used in culvert), sn-tmt bars fe 500, sn-binding wire, sn-silver oak or equivalent planks 38 mm thick, sn-casurina poles 100 - 150 mm, sn-casurina poles 75 - 100 mm dia, sn-broken stone aggregate 12 mm to 10 mm size, sn-plasticizer / super plasticizer, sn-mixer (concrete) - 1 cum capacity, sn-jungle wood runners and planks, sn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, sn-broken stone aggregate 20 mm size, sn-hom of vibrator 0.71 days

CTN :43079682

22 Dec, 2025 6.06 Lacs

Gokak - Karnataka

Tender For supplying materials of kitchen room and ac sheet in govt high school benachinmaradi k in benachinmaradi gram panchayat - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint., ready mix primer paint (ready mix red lead paint)., add hom of welding and grinding machine at 4% on materi, welder grade i,, fitter class 1, m.s rods,, add white cement for pointing at 2% on material, border tiles 30 x 10 cms,, glazed tiles 300x400, vitrified tiles 10 mm thick 600 x 600, mm, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., binding wire,., tmt bars fe 500,., add handling loading and unloading at 1% on material.,, mason class i (with tools).,.,, solid concrete blocks (40x20x20cms) 4.00 n/sqmm, add watering charges at 1 % on labour.,, add sundries charges at 1 % on labour.,, bond stone 20 x 20 x 45 cm.,, rubble stones.,, casurina poles 100 - 150 mm.,, add handling loading and unloading at 2% on material.,, casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size - bib cock 20mm nominal sieze bore, flats ms, chlorinated polyvinyl-chloride pipe 25mm outer dia, mixer(concrete)-1cum capacity, boulders.,, mixer (concrete small used in culvert.), handling loading and unloadding 3% on material, labour charges for lifting and placing in position and making connection at 7% on material.03, polyenthylene water storage tank of specified capacity l.12, pvc pipe of 4kgcum, 63 mm.00, add brush, putty, sand paper at 5% on cost of paint,, liquid wood filter, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add brush, putty, sand paper, roller at 5% on cost of paint.,, plastic emulision paint 01, add brush,putty at 5% on cost of distemper primer, distemper primer.,., mathi/nandi wood scantling,, hom of machinaries for planing,., add cutting and other wastage 5%,, mathi/nandi wood planks for panels 25 mm thick,, add hom welding and grinding machine at 2% on material, fabricator,., ., thick plain glass of 5.50mm, chromium plated screws,.,.,, cleat angles.,., alluminium handles - 15 mm.,., alluminium tower bolt-20 cm., pvc beading.01, rubber beading for shutters beading,.,., nylon rollers,., powder coated 60-70 micron,, add brush at 1% on cost of paint.,., enamel metal paint.,.,, add providing and removing scaffolding at 3% on labour.,, painter class i.,, add wire brush, fine steel woo

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Infrastructure Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations/Associations/Others