Latest inner race Tenders | Government inner race Tenders

CTN :44448127

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of zu-23mm gun latch lock pin (23-mm gun 2a14) (ordnance 2a14/2a14m), retracting cable (cradle assy 01/2a13,fig, trigger spring right hand (cradle assy, trigger spring left hand (cradle assy, screw (right hand attachment assy, adjusting washer (carriage assy 02/2a13), spring (carriage assy 02/2a13 fig-10), lever spring (box holder assy 03/2a13,, washer (plateform & wheel bogie assy, gasket (plateform & wheel bogie assy 0, end piece spring (plateform & wheel bogie-assy, 04/2a13 fig-14), crank shaft front cup with spring in assy 55x80-10, (wheel with hub assy 04-12/2a13 fig 15), packng ring (whlboggie change over buffer assy, 05-/2a13 fig-19), gasket(elevation mechanism-assy 06/2a13 fig 20), shaft (turning mechanism), pusher (turning mechanism) 07/2a13 fig 21), lubricator 1.3ts, spring (cartridge boxes assy 09/2a13 fig-22), spring (part of general assy-assy00/2a13), light returner (parts of general assy 00/2a13, fig-, 1), nut m14x1,5.12.40x.06 (platform and wheel bogie, assy 04/2a13 fig-18), bearing, tail light glass (lamp), elastic stop, lubricator, retracting spring, spring (arm yoke rh assy 01-13 & lh assy 01-14, fig-6), pin (box holder assy 03/2a13 fig-12), locking plunger spring (plateform and wheel, bog), washer (plateform and wheel bogie-assy 04/2a13), gasket(wheel boggie change over buffer- 05-2a13, handle base (elevating mechanism assy 06/2a13), thumb piece, link ejector left hand (part of general assy-), right hand link ejector (part of general assy), level gasket(top carriage), spring latch(23-mm gun (2a-14) ), elevating pin 5x40, plug, worm wheel with shaft, lamp holder, plug (two pin), lamp holder, lamp holder, switch, bulb mn 2.5-0.15, tab lock washer (cradle assy 01/2a13), adjusting washer, trunnion (right hand back attachment assy, screw (right hand rear attachment assy 0, screw (right hand rear attachment assy 01-, ring (carriage assy 02/2a13 fig-8), inner ring (top carriage), outer ring (carriage assy 02), gasket (plateform & wheel bogie-assy 04/2a13, cover gasket (plateform & wheel bogie-assy, bearing 7508h (platform and wheel bogie assy, bearing 7306, hook spring, valve spring (wheel bogie change over buffer, spring (cartridge box assy 09/2a13 fig-22), handle spring (part of genral assy-assy 00/2a13, carrier clamp, bearing ring, glass cover proctective, gasket, jacket assembly lh (cradle assy 01/2a13, fig-5), clamp, trigger shaft (cradle assy 01-2a13), latch pin (cradle assy 01/2a13,fig-7), screw (cradle assy 01/2a13), protacting ring (retracting mechanism rh & lh, assy 01-10 &01-11, fig-5), body cover (retracting mechanism rh & lh assy, lock pin (carriage assy 02/2a13 fig-8), clamp spring (carriage assy 02/2a13 fig-8), cradle lock, spring (box holder assy 03/2a13, fig-12), screw (plateform & wheel bogie-assy 04/2a13), washer (plateform and wheel bogie-assy 04/2a13 ), end piece (jack assy assy 04-7/2a13 fig 14), locking ring (wheel with hub assy 04-123/2a13 fig 15), plug (whlboggie change over buffer assy 05-/), transmission lever (elevating mechanism assy 06), pinion shaft (elevation mechanism-assy 06/2a13), lever (turning mechanism 07-2a13 fig 21), latch (cartridge boxes assy 09/2a13 fig-22), spring (cartridge boxes assy 09/2a13 fig-22), washer (part genral assy-assy-00-2a13 fig-2), screw m5x8.66.50.06, lamp filament 12 v, 21w, pin, washer, brake tie rod (carriage assy 02), bushing (carriage assy 02/2a13 fig-8), spring, lock spring, ring (carriage assy 02/2a13 fig -8), outer race (carriage assy 02), wire, inner race (carriage assy 02), trigger spring, lock pin (box holder assy 03/2a13 fig-12), tie rod (platform and wheel bogie assy 04/2a13 fi, outer screw (plateform and wheel bogie-assy 04, nut (wheel bogies change over buffer assy 05/2a13, lock (over size)elevating mechanism assy 06/2a13, gasket (turning mechanism assy 07/2a13, fig 21), cover assy lh, cover right hand (cartridge boxes class `b'), lamp electric filament

CTN :44449312

27 Mar, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of support roller bearing nutr 3580 size 35x80x28(inner race 29mm) make: skf/fag/ntn/ina/iko/timken.

Central Government/Public Sector

CTN :44464988

30 Mar, 2026 NA

Ludhiana - Punjab

Tender For supply of plain inner racer for rb-5020

Central Government/Public Sector

CTN :44432442

18 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - mixed ms general scrap consisting of de/nde end shield, pinions, lybyrinth set, bearing inner racer, screw coupling, sander assembly, knuckle pin, nuts and bolts, axle box housing, loco gear case, axle box covers, racer, abutment ringh, other ferrous general scrap of wap-7 and wag-9 loco and miscellaneousellaneous loco items, ms parts of pantographs, jali, nut and bolt of aux. compressor spares, defective angle cock, loco pipe, brake rigging, traction housing, pin, tie bar, helical spring, cattle gaurd, coupler , yoke, knuckle, screw coupling, buffer, scrap tmb case, angle with jali, fastners and motor end shield, defective nut, bolts, angle cage, tube light assembly, contractor switches, ms rack off sizems rack small sixe, ms bench local made, ms locker, fir hydrant pipe, electric pannel, ms bars, document binder machine, stand maual cutter and other miscellaneousellaneousscrap. quantity- 80 mt approx. remark- delivery on actual weight basis. reference- ds-8 note no- n16822-25-25238 dated 02.02.2026.

Central Government/Public Sector

CTN :44415361

19 Mar, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - .scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets , dust bin stand , tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs,cut pieces of ms cupboards,rack etc , plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire , electric point , shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx

CTN :44389404

20 Mar, 2026 NA

Parganas - West Bengal

Tender For tender for supply of jet piston cooling , gear crankshaft assembly , pulley crankshaft , rod connecting , casing timing , cover plate pto , seal rear oil , retainer valve spring , tooth bucket , bridge piece , adjuster screw , pedestal , unit oil seperator cyclone , thermostat abi , oil pan assembly twin skin , gear injection pump 65t , seal injector , pipes hp 1 and 2 , pipes hp 3 and 4 , step , pipe turbo oil drain , toeplate 2350 mm wide 16 holes (weld-on) , bearing liner , strainer - fuel filler , filler fuel tank , sensor fuel level , cap fuel tank , cap filler breather , plate cover , element filter 125 micron torque 15-20 nm , foot stabiliser , sideshift , hose hybrid righthand , inner , hose hybrid lefthand , outer , hose hybrid righthand , inner , bracket engine mounting righthand , bracket engine mounting left hand , grille front , lock grille , hinge assembly , rightside , bracket hose guide left side , bracket hose guide right side , bracket hinge , hose 06 bsp lp 105 , hose steer valve to lvb , mounting cab lower a-post , roof moulding , liner roof assembly , support roof liner , door seal right hand , window frame left hand side , seal window left hand side , handle assembly side window , handle righthand (m6) , window tinted glass right hand side , gauge sight 41mm af hexagon torque 9-10 nm , bracket retainer left hand , bracket retainer right hand , loctite 243 as required , latch left hand assembly , pivot block , cover excavator control lever , cover inner fender , rightside , console front , cover inner fender , leftside , cover stowage front , console instrument , cover fuse box , cover assembly , loader control , mirror rear view , rear valance , lift ram , pin slew lock , plate clamp , guard hose lh , guard hose rh , pin pivot , pin pivot 45x300mm , pin pivot , pin pivot , bearing trunnion ram pivot , harness panel cold start , cover battery , cable battery (+ ve) , switch ignition , panel 12v 2 position , relay 12v flasher , switch flashing reverse , mount throttle , cover steer column , link loader control , cable parking brake , ring clamp-loade , throttle cable assembly , spring , pad foot throttle pedal , bearing thrust , bearing , switch column , hose 08 bsp hp 545mm lvb to wa feed pipes , hose lvb to wa feed pipes , hose lvb to wa feed pipes , hose assembly suction , hose tank side , pipe support , hose 10 bsp lp 1860 , hose 1/4 bsp 1270mm hydra clamp pressure , pump hydraulic , pump gear-14cc , pump seal kit for doze r , cylinder , kit seal , kit-seal , plunger cushioning , cylinder , cylinder dipper , bush , ram-as suppli crowd , filter element , hose grease , pivot pin , hub wheel lefthand , hub wheel righthand , bearing needle roller nk 45/30 , gear sun , bearing roller , gear crown wheel and pinion , 13t/33t ratio 13/33 , bush tension flanged - external , ring backup , hose 330mm , valve adapter block assembly ss700 low ratio , sensor speed , bearing taper roller , bearing taper roller , gear 1st 44t ss700 , bearing inner race , fork selector 1st , fork selector 3rd , shaft selector , pad wear , upper 5mm thick , colour green , strainer suction , pad wear , upper 6mm thick , pad wear , upper 7mm thick , bearing needle thrust , switch oil pressure , m12 , case rear machined , spool adapter solenoid , bush selector fork , lever gearshift , lever bottom gearshift , pad wear , lower fix , piston -clutch , bearing taper roller , piston , bearing needle roller , disc spring , spline , plate shim , clutch 1.2mm a/r , dipstick , drive plate , converter w300 2.52 ratio , connector banjo , brake hose 1/4 x760m , mounting rubber , belt front , pulley cooling fan 1.16 1 d 143mm , sensor vacuum - 80m bar , hose ccv outlet , installation silencer turbo , extension exhaust , spring extension , bracket exhaust mounting , bracket exhaust mounting , hose scavenge , buffer , mount sensor , cooler trans / hydraulic oil , fan cowl , bracket mounting centre , plate anti re-circ , hose lp 2400 mm , bracket hose guid

Central Government/Public Sector

CTN :44397925

17 Mar, 2026 NA

Delhi - Delhi

Tender For auction sale of others - pl no 98050126 u/s scrap miscellaneous ferrous items of loco spare & other ferrous items/parts consisting of nuts, bolts, special repair frame, bur frame, electronics rake frame of special repair, bur, vcu, brake rigging items, slack adjuster top, all type hanger levers, equalizing plate, cross lever, hanger plate, brake shoe, hanger lever pin, axle box cover inner race, clamping plate, axle guide, torque arm, sphere block, tie bar, released material of tbu/pbu, dampers, spring deflector, holding ring, inspection cover, impeller, end shield cover, compressor spares, servo motor, tm spare items, horn stay plate, rope sealing, bogie parts, cut pieces of sariya etc. with attachment if any.qty. 60mt. note:- non ferrous and rail will not be delivered. for stock holder sse/s/tkd. ss-11 no-sse/s/tkd/35/25-26/28 date 09.02.2026. ds-8 no. 015056 dt. 09.02.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. note:-cutting may be allowed for easy loading at the time of delivery. material are lying in delhi (tkd) state.

Central Government/Public Sector

CTN :44397969

18 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - melting 98050114 %u2013 ms melting scrap: ms melting scrap released from assorted unserviceable rolling stock, track fittings, machinery, coach and locomotive components including pivot pin covers, pick axle, crow bar claw, released p-way keys, two way keys, dog spikes, rail clips, rail tensor, rail trolley parts, rail tongs, fish plates, joggle plates, heavy perforated ms plates, ms plates, iron plates, steel pattis, rail trolley wheels, channel sleeper fittings, damaged channel sleeper bridge pieces, t-head bolts for channel, bolts, screws, nut bolts, washers, clamps, securing bolts, cotter pins, knuckle pins, cbc supporting device parts, draft gear, draft key, draft yoke, draft hook, draw bar, draw hook beam, coupling links, coupling rods, shaku coupler parts, buffer spindle, spring loaded buffer assemblies, buffer and draw gear parts, centre pivot foundation box, centre housing, bogie bolster, bogie bolster hanger, hanger blocks, bolster suspension pins, laminated springs, support springs, leaf springs, lb springs, primary and lateral bump stops, emu rubber sandwich assemblies, brake rigging parts including brake heads, brake levers, brake cylinder assemblies, bmbc parts, brake pads, traction links, traction levers, traction motor pinion parts, traction motor gear case assemblies, gears, gear box, bearing cartridges, dismantled bearing spares with collars, phonic wheels, ctrb parts, equalising stay rods, anchor links, diagonal rods, gc bars, irs point machine slide parts, point electric detector parts, junction boxes for point machine, signal machine parts, locking slides with block, base plates, face plates, buffer plunger face plates, elbows, channels, guide t sections, parallel guide bars, sej brackets, z brackets, heavy brackets, stiffener plates, support brackets, reinforcement structures, mechanical linkages, cutter chain machine parts, pqrs machine parts, ttm machine components including hydraulic cylinders and hydraulic jacks, mechanical jacks, bottle jacks, piston rods, torque wrenches, spanners, lifting rollers, crane chains and hooks, loco chains, hook bolts, wire ropes, rope slings, pantograph cylinders, compressor cylinders and valves, westinghouse brake unit parts, condenser washers, nrv, dv, diesel generator set parts, metco traverser parts, bcm cotter chains, poh items of bg coaches, motor coach collars, icf collars, axle box front covers, centre pivot components, cattle guards, machine bases, platform cabin parts, mixed engine materials, hardware items, screw coupling parts, bearing end shields, dirt collectors and other miscellaneous ms melting items and railway ferrous scrap, materials broken, worn, bent or corroded and may contain small aluminium or other minor non-ferrous attachments with grease, oil, dirt and rust, all materials unserviceable and beyond economical repair ber, sold on as is where is basis, loading by purchaser, custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :44211110

12 Mar, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of pines collet-drg no-3m-12a-25-14428-01 , pines collet retainer ring-drg no-2-m-12a25-05433 , cnc mco main spindle-drg no-3m-12b-16-7889 , cncmco front inner race lock nut-drg no-4m12b1619624-0-0 , cncmco front outer race lock nut-drg no3m12b1607887-0-0 , cnc mco front thrust ring-drg no-3m12b1607886 , cnc mco rear thrust ring-drg no-4m 12b- 16-7946 , cnc mco collet lock nut -4m 12b- 16-19256 , cnc mco bearing lock nut-drg no-4m 12b- 16-19794 , cnc mco front drum-drg no-4m 12b16-7885 , cnc mco rear drum -drg no-4m 12b- 16-7892 , auto weld tension roller-drg no-4-m-10a65-29980 , auto weld roller-drg no-4-m-10a65-29983 , auto weld feed roller 8 mm-drg no-4-m-10a65-29985 , auto weld wire feed assembly right side3m10a3012973-0-0 , auto weld wire feed assembly left side3m10a3012972-0-0 , auto weld knurling roller-drg no-4-m-10a65-30187 , cnc mco inner sleeve 15 deg-drg no-4m 12b- 16-28360 , cnc mco inner sleeve -25 deg-4m 12b- 16-19623 , mco pu roller -3m02f1413653-0-0 , mco v roller -4m02f1428242-0-0