Web Analytics Made Easy - StatCounter

Inserts Tenders

Get complete information related to latest Inserts Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Inserts Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Inserts Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :42119703 Due date: 11 Oct, 202511 Oct, 2025 NA
Tender For supply of rawal plug 40mm long , bracket for whb , extention nipples 15mm x 50mm , hex nipple cp 15mm x 50mm , suspenders for for e-board ceiling , clips holder for e-board ceiling , e- board false ceiling size 60cmx60cmx4mm , glass panes 3mm , half threaded screw 35mm , full threaded screw 25mm , low plug 35mm , half threaded screw 25mm , sand coarse locally available best quality , fine aggregate sand for concrete , 20mm thick 2nd class hard wood planks clean swan 25cm wide and 2.40 to 3.00 mtr long , ditto but with waste hole of ptmt minimum weight 100 gms , wire nails of any size , aluminium extruded handle 100mm size , aluminium extruded barrel tower bolt 150mm , glue for lime , 12mm thick particle board , sheet assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket and railing 60mm long , french polish , distemper , 18mm pre laminated particle board, grade 2 quality, interior grade, commercial type , exterior emulsion paint weather proof of 1st quality isi marked of the following make - asian oblique apex ultima oblique berger oblique indigo , painting brush 10cm flat size , painting brush 7.5cm flat size , painting brush 2.5cm flat size , lime unslaked best quality fat lime , wooden screw 25mm to 40mm long size as reqd 100 nos per pkt , wooden screw 15mm to 20mm long size as reqd 100 nos per pkt , writing brush flat size no 1 , writing brush flat size no 2 , writing brush flat size no 3 , writing brush flat size no 4 , pvc bracket plain for 20mm dia rod , pvc bracket angle for 20mm dia rod , fancy bracket plain for 25mm dia rod , fancy bracket angle for 25mm dia rod , centre support for 25mm dia rod , lime colour blue in 100 ml packet , rubber cill door bottom , stell peg set of six , indigo platinum series fllow coat emulsion paint of isi marked of colour rred oblique grey oblique white oblique yellow etc. make - indigo oblique asian oblique berger oblique granostone , sand paper , scrapper , roller for paint , ppgi roof sheet corrugated , plain sheet , self tapping screws , wooden beading , spindle no 3 , spindle no 2 , hasp and staple , wooden battens n.exc 3 sqm , pvc lipping , f oblique cistern washer , f oblique cistern handle , bib cock washer all types , veneer board 8 feet x4 feet x1mm , wall rounted rectanglur glass sholves , 20mm nominal graded crushed stone aggregate //bid details 2 / 84

CTN :42113332 Due date: 21 Oct, 202521 Oct, 2025 NA
Tender For supply of consumables for etv icp oes : : - p n e40 f 004 graphite contact inlet , p n e40 f 003 graphite contact outlet , p n e40 v 003 10 set of 10 premium graphite tubes , p n e40 f 016 ceramic inserts inlet , p n e40 f 011 ceramic inserts outlet , p n e40 f 017 aerosol ceramic alumina tube , p n nt2 o 004 special green o ring for furnace door , p n nt2 o 016 set of 3 pcs alumina o-rings for ceramic tube , p n 21 809 0965c fs13 6 ball cup adapter , p n 1121356040 sheath gas device

Central Government And Public Sector

CTN :42093593 Due date: 14 Oct, 202514 Oct, 2025 4.29 Lacs
Tender For supply of purchase of tools for power house mechanical workshop c c - half round smooth file with handle size 6 inch , half round bastard file with handle size 6 inch , flat smooth file with handle size 6 inch , flat bastard file with handle size 6 inch , triangular smooth file with handle size 6 inch , triangular smooth file with handle size 12 inch , half round bastard file with handle size 12 inch , half round smooth file with handle size 12 inch , flat smooth file with handle size 12 inch , flat bastard file with handle size 12 inch , power hack saw blade 350x32x1.60mm 6tpi , tap set adjustable handle 15inch length for m4 to m18 size , tap set adjustable handle 40inchlength for m18 to m35 size , tap set 14 mm , tap set 16 mm , tap set 18 mm , tap set 20 mm , tap set 27 mm , tap set 30 mm , tap set 8mm , tap set 10mm , tap set 12 mm , tap set 6 mm , drill bit 2 mm , drill bit 4 mm , drill bit 6mm , drill bit 8mm , drill bit 10 mm , drill bit 12 mm , drill bit 14 mm with taper shank , drill bit 16 mm with taper shank , drill bit 17 mm with taper shank , drill bit 18 mm with taper shank , drill bit 20 mm with taper shank , drill bit 22 mm with taper shank , drill bit 24 mm with taper shank , drill bit 26 mm with taper shank , drill bit 27 mm with taper shank , drill bit 28 mm with taper shank , drill bit 30 mm with taper shank , drill machine keyed chuck for 1.5 to 13mm drill bit size , indexable carbide thread turning inserts for right hand metric external thread for pitch 1 mm , indexable carbide thread turning inserts for right hand metric external thread, for pitch 1.25 mm , indexable carbide thread turning inserts for right hand metric external thread, for pitch 1.50 mm , indexable carbide thread turning inserts for right hand metric external thread, for pitch 1.75 mm , indexable carbide thread turning inserts for right hand metric external thread, for pitch 2.00 mm , indexable carbide thread turning inserts for right hand metric external thread, for pitch 2.50 mm , suitable 1inchx1inch shank for indexable carbide insert for right hand metric external threading , inside spring caliper 6 inch , inside spring caliper 12 inch , outside spring caliper 12 inch , allen key set 1.5mm to 10mm

CTN :42094971 Due date: 20 Oct, 202520 Oct, 2025 NA
Tender For supply of 6 items c c - bracket 176.93.014cb , rack assy 188.93.074cbcb , clamp 172.93.358 , clamp 172.93.209 , clamp 175.93.043cb , support right hand 176.93.017cb

Central Government/Public Sector

CTN :42097797 Due date: 27 Oct, 202527 Oct, 2025 NA
Tender For tender for supply of parting tools and inserts for lathes and vtl c c - cut off blade - parting tip width (w) 4mm and parting travel can be given up to (cd) 40mm , blade holder for cut off blade - parting tip width ( w ) 4mm and parting travel can be given up to (cd ) 40 mm -sbn 3229-32k , 4mm inserts suitable for the above mentioned parting tool holders , holder key for cutting blade holder , cut off blade - parting tip width (w) 6mm and parting travel can be given up to (cd) 60mm , blade holder for cut off blade - parting tip width ( w )6mm and parting travel can be given up to ( cd ) 60mm , 6mm inserts , grade k-20 suitable for above mentioned parting tool holders , holder key for cutting blade holder , cut off blade - parting tip width (w) 8mm and parting travel can be given up to (cd) 100mm , blade holder for cut off blade - parting tip width 8mm and parting travel can be given up to ( cd ) 100mm , 8mm inserts , grade k-20 suitable for above mentioned parting tool holders , holder key for the above cutting blade holder

Central Government/Public Sector

CTN :42098689 Due date: 09 Oct, 202509 Oct, 2025 NA
Tender For p6a1y43069-disc milling cutter,heller inserts and spares

Central Government/Public Sector

CTN :41759290 Due date: 07 Oct, 202507 Oct, 2025 21.63 Lacs
Tender For corrigendum : tender for supply of 33kv line maintenance between jaduguda and narwapahar for two years : : - replacement of 33kv pin insulator including supply of necessary fixing materials. this includes binding of acsr dog conductor also , replacement of 33kv disc insulator including supply of necessary fixing materials in existing 33kv line , replacement of 33kv cross arm including supply of necessary fixing materials , replacement of packing pieces in existing cross arms , replacement of pg clamp for dog conductor including supply of necessary fixing materials , installation of complete stay set including supply of necessary fixing materials. this includes digging of stay pits and grouting of stay rod in cement concrete foundation also as required , installation of gi wire 7/10 swg for stay including supply of necessary fixing materials , installation of gi wire 8 swg for guard wire , installation of gi wire 7/14 swg for earth wire including supply of necessary fixing materials , replacement of back clamp for cross arm & top bracket (50mm x 10mm flat) including supply of necessary fixing materials , installation of d.p. channel (100mm x 50mm x 6mm) 1 x 3 mtrs including supply of necessary fixing materials , installation of d.p. channel support clamps including supply of necessary fixing materials , replacement of earth clamps for earth wire including supply of necessary fixing materials , replacement of side stay clamp including supply of necessary fixing materials , replacement of angle stay clamp including supply of necessary fixing materials , replacement of cross bracing for d.p. structure including supply of necessary fixing materials , replacement of clamp for x-bracing including supply of necessary fixing materials , installation of earthing pit using pipe earth electrode as per drawing including connection to earth wires and supply of necessary materials required it , laying & tensioning of acsr dog conductor including fixing / binding at insulators in the 33kv line (per km consist 3 conductor of ryb phases). , tensioning of dog conductor and supporting & fixing on insulators including binding as required in the section (per km consist 3 conductor of ryb phases). , cutting and removal of hages , trimming of trees and branches of size more than 4inch dia and disposal of un-serviceable materials to ucil canteen building as per direction of eic , cutting and clearing jungle grass including uprooting of rank kegetation , long grass , bush wood , trees and saplings upto 4inch dia measured at a height of 1 meter above ground level as per direction of eic , erection of m.s. rail pole 105 lbs , 13 meters long including drilling of 2 nos holes of 5/8inch dia as required at one end of rail pole for fixing of f- clamps , installation of ab switch on double pole structure. this includes fixing of required channels and clamps and other fixing as required and for proper operation. this includes connection of dog conductor alsodog conductor also , installation of 33kv lighting arrestor on double pole completed with line and earth connections , maintenance of ab switch on double pole structure , 33kv line patrolling from narwapahar to jaduguda , replacement of earth spike along the 33kv line & connection to pole , number of rail pole with painting of pole upto 6 feet height for colour coding of line

Central Government/Public Sector

CTN :41939374 Due date: 06 Oct, 202506 Oct, 2025 NA
Location: Goa - Goa Goa - Goa
Tender For corrigendum : supply of outfittings items for furniture and interior : : - roller shutter 840x755 powder coating ral 7035 light grey , basket , storage tray , permanent beam , removable beam , bracket , hook , bar , board for damage control party diagrams , grip , shackle , angle , thumb pin , lug boss , belt with buckle , belt with tip , band for spta p z - 1000 , band for spta p z -1500 , band for spta p z -2000 , band for spta p z -2500 , band for spta a p z -3000 , band for spta p z -3500 , band for spta p z -4000 , band for spta p z -4500 , band for spta p z -5000 , suspension , pad for cylinder , brackets ii , hinge , brackets , screen upper fastener , board fastener , special nut , support assembly for acoustic buoys store , support

CTN :41396437 Due date: 01 Oct, 202501 Oct, 2025 NA
Tender For bid to ras supply of biometric access cont systems d d - fingerprint and rf card based time attendance and access control solutions , em prox card personality module , access control license for 100 user , pc workstation , power over ethernet switch , unshielded twisted pair cable 305 mtrs , protective box , electromagnetic lock for door , door release switch , support bracket , rf cards

CTN :41520028 Due date: 01 Oct, 202501 Oct, 2025 NA
Tender For bid to ras corrigendum : supply of tool holder and inserts : : - mtjnl3232p22 , tnmg 220412 , tnmg 220408 , lh cop tool 55deg pdjnl 3232 p15 , inserts dnmg 150608 with nose raduis 0.8 , rh copying tool pdjnr 3232 p15 , mtenn3232p22 , burnishing tool lh , burnising tool rh , burnishing tool neutral , s32upclnl 12- boring bar dia 32 mm , cnmg inserts r0.08mm
 Loading, Please wait...

Connect us via What's Up