Latest instrument stand Tenders | Government instrument stand Tenders

Central Government / Public Sector

CTN :44773989

13 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of outer stationary plate for mk-50 draft gear to m/s besco drg no : besco fig.19 , item no. 6, alt : -- --, ( item to be supplied with work test certificate). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44755513

27 Apr, 2026 94.91 Lacs

Bangalore - Karnataka

Tender For tender for supply of c422lch1022 fabrication and supply of sheet metal detail parts : -bonding strip top , bonding strip top , bonding striptop lh , bonding strip bottom , bonding strip bottom , bonding strip bottom , doubler taxi light , bonding strip , bonding strip , doubler , bonding strip , bonding strip stage i , inner face sheet fwd lh , inner face sheet fwd rh , inner face sheet aft lh , inner face sheet aft rh , outer face sheet fwd lh , outer face sheet fwd rh , outer face sheet aft lh , outer face sheet aft rh , corrugated sheet lhs , corrugated sheet rhs , plate , bonding strip front spar lh , bonding strip front spar rh , bonding strip rear spar lh , bonding strip rear spar rh , doubler base support , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , bonding sheet , strip electrical continuity , lap shear test specimen

Central Government/Public Sector

CTN :44770979

24 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 2013437 , 2014093 , 2014095 , 2014134 , 2014365 , 2013419 part name : bucket assembly type : right hand material : e 250 a,is:2062-2006 drawing reference : 3300290003 rev-b equipment name : dehydrator a.technical specification: 1.dimensions :as per ga drawing & its part drg.no:3300290004 b.special instructions: 1.the plate used should be free from all kinds of defects. 2.after complete welding,sand blasting is to be done to all the body surfaces. 3.then it is to be painted with 2 coats of industrial cream colour rubber paint. 4.the technical notes mentioned in the ga drawing & part drawing should be followed/maintained. 5.material test certificate shall be submitted from government/government approved laboratories only., part name : side door(rh) material : e 250 a,is:2062-2006 drawing reference : m/image of 3301140035,r-i equipment name : bhs screen a.technical specification: 1.dimensions for side door (rh) :as per mirror image of the drawing b.special instructions: 1.the door shown in the drawing is lh side door & rh side door is mirror image to lh side door. 2.welding shall be done as shown in the drawing. 3.the technical specifications mentioned in the drawing should be strictly followed/maintained. 4.test certificate shall be submitted from government/government approved laboratories only., part name : side door(lh) material : e 250 a,is:2062-2006 drawing reference : 3301140035 rev-i equipment name : bhs screen special instructions: 1.welding shall be done as shown in the drawing. 2.the technical ) /bid number : gem/2026/b/7412988 * /dated: 06-04-2026 & & / bid document 1 / 22

CTN :44767557

16 Apr, 2026 NA

Barmer - Rajasthan

Tender For supply of bore hole gl to 10m depth , bore hole 10m to 20m depth , hard rock bore hole , trial pit , collection of undisturbed sample , collection of disturbed sample , earth resistivity test , standard penetration test , natural moisture content test , determination of atterberg limits , specific gravity test , dry and bulk density test , consolidating tests , grain size analysis gsa mechanical sieve , grain size analysis gsa hydrometer analysis , standard proctor test , modified proctor test , direct shear test , triaxial test uu , unconfined compression tests , chemical analysis soil , chemical analysis ground water , free swell test , cbr test of subgrade soil , porosity of rock samples , water absorption of rock samples , unconfined compressive strength tests rock , dry density test rock , point load index rock , specific gravity test rock , plate load test , soil investigation report , key plan drawing , boundary marking of 13 acres , topographic survey 13 acres , boundary wall pillar , bench mark pillar

CTN :43994952

15 Apr, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itot in fitter tradeat iti tarsali, gujarat, india - ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric), ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric)

CTN :43994967

15 Apr, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government/Public Sector

CTN :44753589

13 Apr, 2026 NA

Haridwar - Uttarakhand

Tender For tender for supply of aluminium alloy d d -aluminium alloy plate n.std-astm b209 (m) size- 25.4 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std-astm b209 (m) size- 28.75 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate (plate as per din 1725 & din 1745 also acceptable ) n.std-astm b 209 (m) size- 6.35x2000x6000mm dim.- txwxl grade- al-5083 h112 , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-70 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 size- thk-70 mm , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 125 grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-2mm dim.- t grade- gr-al 5083 h 112 , aluminium alloy round (round as per din-1725 & din- 1747 also acceptable ) n.std-astm b 221 (m) size- d-400mm dim.- d grade- al- 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-15 mm dim.- t grade- gr-al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-100 mm dim.- t grade- gr-al 5083 temper f , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 40x5 dim.- odxt grade- al 5083 h112 , aluminium alloy plate n.std-astm b209 (m) size- 9.50 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std- astm b209 (m) size- 19.05 dim.- t grade- alloy 5083 (h-112) , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 340 dim.- d grade- al 5083 h112 , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 330x27.5 dim.- odxt grade- al 5083 h112 , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 150 dim.- d grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-10 mm dim.- t grade- gr-al 5083 h 112

Central Government / Public Sector

CTN :44761121

14 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of stiffener plate with fasteners as per rdso drg.no.rdso/cg/drg/ 24034, alt-02. with pitch between holes (p) =100 + / - 0.5 mm & hole distance from edge(a)=25 + / - 01 mm) suitable for (oem-sona blw, sanrok,ftirtipl). note : (1) ''serial number''(starting from 01 to till the last plate sl.no) to be stamped with permanent ink along with mfg. details (as per note 08 of rdso drg.) and size of the pitch. (2). hardness test report (as per note 05 of rdso drg. for each plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of national accreditation board for testing and calibration laboratories (nabl) accredited certified lab and test reports to be sent along with the material. (3) material to be door delivered within 60 days from the date of issue of purchase order. (4) inspection by consignee as per nabl certificate. (warranty period : upto 30 months from the date of delivery.) [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44761122

14 Apr, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of stiffener plate with fasteners as per rdso drg.no.rdso/cg/drg/ 24034, alt-02. with pitch between holes (p) =90 + / - 0.5 mm & hole distance from edge(a)=30 + / - 01 mm) suitable for (oem-frointer, nwfp,jupiter). note : (1)''serial number''(starting from 01 to till the last plate sl.no) to be stamped with permanent ink along with mfg. details (as per note 08 of rdso drg.) and size of the pitch. (2). hardness test report (as per note 05 of rdso drg. foreach plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of national accreditation board for testing and calibration laboratories (nabl) accredited certified lab and test reports to be sent along with the material. (3) material to be door delivered within 60 days from the date of issue of purchase order. (4) inspection by consignee as per nabl certificate. (warranty period : upto 30 months from the date of delivery.) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44679019

13 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of set of wearing plate for adjusting body bogie clearence as per drg no. icf/sk3-0-5-007. one set consists of (1) item no. 3-qty-6nos. material and specification as per drawing. test certificates for the material, surface hardness must be from nabl approved lab. [ warranty period: 30 months after the date of delivery ]

Instrument Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector