Latest insulating kit Tenders | Government insulating kit Tenders

corporations/Associations/Others

CTN :36240588

31 May, 2024 NA

Ambala - Haryana

Tender For auction sale of gi tower scrap etc.,2v 600ah vrla battery cell scrap etc.,acsr conductor scrap etc.,11 kv xlpe power cable scrap etc.,dirty t/f oil scrap etc.,11kv xlpe aluminium power cable-scrap etc.,2v 200ah lead acid battery cell-scrap etc.,220kv circuit breaker sf-6 type aux voltage 220v etc.,33kv current transformer, off size-scrap etc.,acsr conductor off size-scrap etc.,33kv circuit breaker vcb type aux voltage 220v etc.,surveyed off car innova 7 seater etc.,unequal tower leg angle iron-scrap etc.,insulation resistance tester 5000v-scrap etc.,66kv circuit breaker sf-6 type aux voltage 220v etc.,33kv circuit breaker, bocb, auxillaryvoltage-220v etc.,dirty transformer oil - scrap etc.,tyres nylon-scrap etc.,fax equipments, make -brother, model- fax- etc.,application processors (cpu +monitor+key board+mouse) etc.,dirty/used transformer oil filled in 46 no. etc.,dirty/used transformer oil filled in 58 no. etc.,dirty/used transformer oil filled in 54 no. etc.dd store, hisar),dirty/used transformer oil filled in 34 no. etc.,empty steel drum @209 ltr capacity etc.,empty steel drum @ 200/220 ltr. etc.,empty transformer oil drum @209 ltr etc.,dirty/used transformer oil filled in 38 no. etc.,dirty/used transformer oil filled in 210no. etc.,dirty/used transformer oil filled in 198 no. etc.,dirty/used transformer oil filled in 37 no. etc.

corporations/Associations/Others

CTN :36200376

22 May, 2024 NA

Ambala - Haryana

Tender For auction sale of gi tower scrap etc.,2v 600ah vrla battery cell scrap etc.,acsr conductor scrap etc.,11 kv xlpe power cable scrap etc.,dirty t/f oil scrap etc.,11kv xlpe aluminium power cable-scrap etc.,2v 200ah lead acid battery cell-scrap etc.,220kv circuit breaker sf-6 type aux voltage 220v etc.,33kv current transformer, off size-scrap etc.,acsr conductor off size-scrap etc.,33kv circuit breaker vcb type aux voltage 220v etc.,surveyed off car innova 7 seater etc.,unequal tower leg angle iron-scrap etc.,insulation resistance tester 5000v-scrap etc.,66kv wave trap inductance-1mh rated current-400a - scrap etc.,66kv circuit breaker sf-6 type aux voltage 220v etc.,33kv circuit breaker, bocb, auxillaryvoltage-220v etc.,dirty transformer oil - scrap etc.,tyres nylon-scrap etc.,fax equipments, make -brother, model- fax- etc.,application processors (cpu +monitor+key board+mouse) etc.,dirty/used transformer oil filled in 46 no. etc.,dirty/used transformer oil filled in 58 no. etc.,dirty/used transformer oil filled in 54 no. etc.dd store, hisar),dirty/used transformer oil filled in 34 no. etc.,empty steel drum @209 ltr capacity etc.,dirty/used transformer oil filled in 65 no. etc.,empty steel drum @ 200/220 ltr. etc.,empty transformer oil drum @209 ltr etc.,dirty/used transformer oil filled in 38 no. etc.,dirty/used transformer oil filled in 210no. etc.,dirty/used transformer oil filled in 198 no. etc.,dirty/used transformer oil filled in 37 no. etc.

CTN :36176234

22 May, 2024 NA

Tiruvallur - Tamil Nadu

Tender For custom bid for services - cpclh24198 carrying out hot tag items and structural replacement jobs in plant16 17 18 19 77 86 87 m and i shutdown 2024 at cpcl manali-carrying out hot tag items & structural replacement jobs in plant-16, 17, 18, 19, 77, 86 & 87 m&i shutdown 2024 at manali refinery of cpcl-supply, erection & dismantling of steel scaffolding: the job includes transportation of scaffolding materials in contractor's scope of supply,erection of scaffolding at site covering the areas specified including providing vertical posts of pipes at interdistance of 1.5 m and horizontal numbers at a interdistance of 0.5 to 0.75m ,providing tierods at corners to give sufficient strength to the structure,placing the steelplanks/frp gratings on top for making sufficient area.dismantling scaffolding after completion of job and returning the scaffoldingmaterial to specified place including all tools ,tackles,consumables,labours and contractor's supervision as directed by the engineer-in-charge. 1.for measurement in sqm:2(length+width)xheight area covered by the scaffolding is to be taken. 2.scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. blinding and de-blinding - the job includes collection & transportation of required quantity of materials like blinds, gaskets, fasteners, etc., from owner's storage point, loosening & tightening of studs (cold / gas cutting if required), wedge opening, cleaning of flanges, insertions and removal of blind & gaskets, providing new gaskets after removal of blinds, overhauling of fasteners using oil, replacing the defective studs / nuts to ensure zero leak of joints including hot bolting. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects, transportation of unused materials to owner's storage point and dumping the generated scrap material to designated area as per eic instructions. removal of flanged valves (other than safety valves): the job includes removal of flanged valves at all grades & elevations by de-bolting / cold cutting / gas cutting and transportation of the valve to the maintenance valve shop or any other designated place inside the refinery premises for repair / disposal. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, dumping the generated scrap material to the designated area, all consumables and labour to complete the job in all respects., installation of flanged valves, dismantling & removal of piping: the job involves removal of existing above ground, under ground, overhead insulated or uninsulated or steam traced piping including all types of fittings like elbows / tees / reducers, etc., flanges, valves, all types of instruments, supports by cold cutting / gas cutting / grinding, etc., at all locations at all grades & elevations without damaging any other portion of the existing unit, lowering down the same to ground level, transportation of the same to the designated area as per the instructions of engineer-in-charge. the insulation materials to be removed from the pipes and transported to their respective designated locations as per eic. the job also includes supplying of all types of tools & tackles, lifting arrangements like chain pulley blocks, machineries, all consumables and labour to complete the job in all respects., carbon steel piping work - above & under-ground: the job includes transporation of all free issue materials from owner's storage point to work site, handling at site, cutting, bevelling, fabrication, laying, welding & erection of carbon steel piping at all locations under ground and above ground level, overhead, over sleepers, piperacks, crossovers, pipe sleeves, trenches, stand posts, connec

corporations/Associations/Others

CTN :36177272

29 May, 2024 NA

Guna - Madhya Pradesh

Tender For auction sale of mix ms scrap : iron scrap, lighting fitting etc,mix scrap rubber and plastic :,u/s panel rack and panel frame -7nos,u/s packing cartoon,u/s air intake filter (cylinderical)-864 nos,u/s ms drums 210l cap (closed mouth) - 70 nos,u/s wooden scrap,u/s scrap mix cable - 600 kg,u/s mix aluminium scrap,mix used/scrap stainless steel fire hose nozel -ss-540 kg,used/scrap telephone booth 2big and 1 small- 3 nos,e-waste scrap,battery (hazardous waste) : - 87 nos,old and used n2 dyer molecular sieves desiccant packed in 10 ms drum,old and used glass wool insulation

CTN :35956802

18 May, 2024 NA

Durg - Chhattisgarh

Tender For corrigendum : custom bid for services - esp hv rectiformer repair at nspcl bhilai ppii - work includes fault finding, repairing, overhauling, testing and replacement of the items as described below for the said transformer to make it functional in all respects. 1)hv winding: preparation of new set of coils as per existing winding and insulation class as per requirement. coils should be made with electrolytic grade new copper. rewinding of hv winding with the new coils. 2)lv winding: repair/re-insulation of lv winding after removal of old insulation. proper annealing of old copper to be done before starting re-insulation job. 3)providing fresh inter layer insulation. 4)providing and fixing new insulation supports of fiber reinforced (frp) wherever missing /damaged. original dimension must be maintained. bakelite materials are to be replaced wherever necessary. 5) sundry items like cotton/glass tape, varnish, bakelite sheets, silica gel, tube, nuts and bolts etc. required for repair are to be supplied by the vendor. however, scrap generated out of these works will be kept by the vendor. 6) complete re-insulation of ac reactor. 7) hv & lv bushings of wsi make or equivalent are to be provided by the vendor. 8) dismantling of defective core and preparation of new transformer core if required. material will be supplied by the vendor. 9) new high voltage resistance column (hind rectifier/ bharat electronics/ ador make) is to be supplied by the vendor. 10) rectifier diode bridge (hind rectifier/ bharat electronics/ ador make), feedback diode stacks are to be replaced by the vendor. 11) studs coming out from the lv bushings for lv cable termination needs to be replaced if threads found damaged. 12) there should be no oil leakage from any part of the transformer after assembly and filling of oil. 13) any unspecified works, to make the transformer more reliable has to be done by the vendor i. works to be done/ items to be replaced: i. replacement of gaskets of suitable thickness at all flanges, joints, top covers with rc-70c grade anchor cork make or equivalent by the vendor ii. all fasteners are to be replaced by the vendor (with gi material). iii. all hv, lv and control bushings oil seals are to be replaced with new ones by the vendor iv. silica-gel breather of capacity 0.5 kg is to be replaced with new one with new silica-gel v. replace view glass/ gasket of the oil conservator. the oil level should be clearly visible in the oil tank gauge glass. vi. oti (precimeasure or equivalent make) and buchholz relay (make- sukrut or equivalent) shall be replaced by the vendor. vii. transformer will be sent with oil filled. if any top up is required at vendor's works will be in scope of vendor. the oil to be used for top up shall be of new ehv grade transformer oil (as per is: 335) with minimum 50kv bdv value and maximum moisture content 15 ppm. after completion of repair job, filtration of complete oil has to be carried out for achieving oil parameter of minimum 50kv bdv value and maximum moisture content 15 ppm. vii. painting inside the tank with epoxy paint and outside with synthetic enamel paint with colour code ral 5012 is to be done. ii. tests to be conducted: i) hot spot test of core at rated amp-turn after removal of all windings. ii) resistance & inductance measurement of all windings. iii)ratio test. iv) induced over voltage test as per is 2026 (part iii) 1981. v) short circuit test. vi) no load current and loss test. vii)insulation resistance test, pi value before and after above tests. viii) bdv of oil as per relevant is code and standard. ix) high voltage test on hv winding as per is 2026 (part iii) 1981. x) voltage and current feedback circuit rectification /calibration and testing up to transformer terminal block

corporations/Associations/Others

CTN :36137282

21 May, 2024 NA

Cuttack - Odisha

Tender For auction sale of ms scrap (mixed ),cast steel scrap (ladle),cast steel scrap (cyclone separator),cast iron slab,broken electrode paste,power copper cable with pvc insulation,copper scrap (pressure ring and contact clamp),aluminium bronze (pressure ring),compactor roll segment,aluminium scrap,gi, gci and meta color sheet (cut pcs),s s scrap mixed grade,electrical scrap (motor and stator etc),manganese steel,electrical scrap (light fitting, indoor and outdoor unit of ac),ms tank,conveyor belt (cut pcs)

State Government

CTN :36125621

13 May, 2024 NA

Muzaffarpur - Bihar

Tender For quotation for sale of routine scrap material (other than capital items/equipment) -news papers (all types), magazines etc. ,shredding paper / mix of white all colors and of all thickness complete ,old books registers /files /folders and all stationeries etc. ,empty plain card board boxes of diff. sizes, shapes etc. (brown/ white colour) from small to big (corrigated boxes), miscellaneousllaneous broken glass scrap, broken ,bottles, sheet glass 4mm to 12mm in all sizes ,broken switches, electrical switch board, fan regulators, plug, sockets etc. ,fused bulbs (cfl, ordinary bulbs, tube lights of all types ,empty gunny bags (large and small) ,,wooden santlilng, stripes, pieces, logs, pattis, ply, teak wood etc. of various sizes, packing material (indian/ imported) of all types of miscellaneous items ,condemned cotton pillows with or without cover complete ,condemned cotton waste linen ragged white / green / blue/ toned / soiled / etc. (all colours) ,condemned terricot waste linen ragged white / green/ blue / toned / soild / etc. (all colours) ,condemned thick drill clothes / blankets (all colour) ,condemned cotton/foam/coir mattresses with or without cover complete, old cartridge / rollers etc. of all sizes and make ,wax blocks of all sizes, shapes complete ,tyres per kg ,all types of glass bottles and other glass scraps ,used oil (machine) ,old battery, broken cast iron pipes including collar, bend, bracket etc. ,g. i. a/c ducting including collar, bends, galvanized sheets etc. ,old m.s. / g. i. pipes (assorted length & sizes) including all fitting etc. ,broken aluminum wire pieces with pvc insulation in pieces and full length complete including broken switches ,miscellaneous aluminum scraps, hollow pipes, soil alum. (nonmagnetic, stripes, screws, false ceiling, runner, panels complete) ,aluminum a/c filters ,stainless steel (nonmagnetic) vessels, angles, bracket, utensil, drums, angles etc.,misc. copper scrapes, plates, stripes, sheets glass 4mm to 12mm in all sizes complete,miscellaneous bass scarps, plates, stripes, sheets, angles, pipes complete, broken hard plastic, broken black or white colour cans including ,clear plastic of 5 liters to 20 liters, empty plastic containers /can (5 liters) black & white ,miscellaneous plastic scrap, plates, stripes, sheets, pipes etc. ,empty plastic oil tins of 15ltrs ,empty plastic containers of all types

corporations/Associations/Others

CTN :36112280

16 May, 2024 NA

Thiruvananthapuram - Kerala

Tender For auction sale of vpi vaccum pressure impregnation (mzr-1),damaged and unserviceable co2 cylinders (pgk-1),damaged and unserviceable 1.5 ton window type air conditioner (pgk-2),110kv ct without oil (pgk-3),old,used,damaged and unserviceable 3x300 sqmm aluminium xlpe cable (pgk-4),110kv ct without oil ( 7 nos.) (plb-1),old and damaged copper stator coils with insulation (mdy-1),structure of 10 tonne clyde derric crane (kkd-1),various scrap (cst-1),ug cable (cu.) xlpe (khe-4)

CTN :36100477

25 May, 2024 NA

Multi City - Bihar

Tender For circular lifting magnet for lifting cold as well as hot material up to 600deg c in foundry environment . deep field coil design, copper wound for 220v dc operation, must include 03 leg chain and bail assembly, ext ernal electrical connectors and surge suppressor, heavy duty cast magnet designed for severe scrap handling d uty similar to ohio make model 66dcwx, confirming to the following specification for single magnet characteri stics- 1. cold current - 105 amps max. 2. cold power- 18.5 kw 3. self-weight should not be more than 5ton in clusive of chain, bail and other accessories 4. duty cycle: min. 50%, 24 hrs./ day 7 days/ week, to allow extra ha ndling time of hot materials at 10minutes lift cycle 5. diameter of magnet: 66inches -1 inch +3inch (1650mm -25. 5mm/+50mm) 6. lifting capacities shall not be less than (a) pig iron: h m s - 5200 lbs. (2359kgs) (b) broken/cu t scrap: 2700 - 3300 lbs. (1225-1497kgs) (c) steel turnings: 1700 lbs. (771kgs) note: the tolerance in lifting c apacity must be +/-25% of the above mentioned ranges at all operating conditions. 7. magnet conductor shall be of premium electrical grade copper with 99.99% purity with class h insulation for maximum coil life under severe operation. 8. magnet shall be of high grade cast steel welded construction for strength and waterproof. 9. heavy duty, nonmagnetic bottom plate & sealing plate, made of wear resistant & work hardened manganese steel shall be used to protect the coil from damage caused by impact including bumping plate. 10. additional protection from moisture & impact is to be provided to the coil with the use of non-magnetic manganese sealing plate.11. heavy duty, annealed alloy steel 3-legged chain with a master hook bail is to be provided.12. suspension lugs should be heavy-duty & pins shall be provided to connect the chain to the magnet. 13. suitable rating surge suppresser (me tro cell) shall be introduced in the magnet. 14. electrical connectors: - plug-in type connectors made from a size of 25 sq. mm 2 - conductor type "w" magnet cable, 2000v dc rated for durability and ease of replacement. 15. e xternal connectors to be clamped and protected with a shield. 16. 08 hrs. heat rise to be performed to verify mag net integrity. temperature rise test, high voltage test and insulation resistance test should be performed and reco rded for traceability and future reference. note: 1. magnet must be same or similar in all respects to the 66 inch ( 1676 mm) dcwx model, ohio make magnets. 2. all relevant tests and test certificates shall be submitted alon g with the supply. 3. the manufacturer shall carry out continuous load test. 4. warranty: 24 month from the date of commissioning and proving out of m&p. 5. stage inspection by tpi before closing the magnet and inspection r eport to be submitted by the firm to rwp/bela with the supply. 6. tenderer shall indicate the service support avail ability. stage inspection by tpi before closing the magnet (as 100% of po qty.) [ warranty period: 24 months after the date of delivery ]

Insulating Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

corporations/Associations/Others