Latest insulation tank Tenders | Government insulation tank Tenders

State Government

CTN :38557579

26 Dec, 2024 NA

Balaghat - Madhya Pradesh

Tender For building material - thanapsakpadah 2 inch pins iron bars tested iron/bars (pap danta j) 8 bars iron/bars (pap danta j) 10 bars iron/bars (pap danta jhd) 12 bds lappatma cement (chbp pap 1489/1991) 50 litres, 53 liters of sand per cubic meter. sand-clean as per standard, ballast 20 mm per cubic meter, ballast 40 mm. per cubic meter, stone dust (sajvadum knej) per cubic meter, murum hard per cubic meter, pottery size of baked brick 94 inch per thousand, brick (sal. i.t.b.) size (94) inch per thousand, sal/bija frame per square feet, palla door q1. 36'x70' feet 30 mm per piece board waterproof laminated, palla door q2. 29'x70' feet 30 mm per piece board waterproof laminated, pipe 1 inch c.p.v.c., l.p 20 feet per piece a pipe 1.5 inch c.p.v.c. 20 feet per piece a pipe two inch c.p.v.c. ? 20 feet per piece a pipe three inch c.p.v.c. 20 ft per piece a plastic water tank four layer 1000 litre per piece ppa plastic water tank four layer 500 litre per piece ppa plastic water tank 6 mm (2x2 ft) per sq. ft. double charge a granite per sq. ft. tata steel profile sheet 4x10 mm 25 gauge (0.5mm), tata steel profile sheet 4x12 mm 25 gauge (0.5mm), tata steel profile sheet 4x14 mm 25 gauge (0.5mm), tmt frame and counterfeiting parts, cement frame 36'x70' per piece, iron frame 36'x70' per piece paver block per piece

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

corporations/Associations/Others

CTN :38583998

20 Dec, 2024 NA

Multi City - Multi State

Tender For auction sale of wooden waste, mixed,ms scrap, light,ms scrap, heavy (04 loc),galvanised iron scrap,motor scrap,used valve scrap (big size),glass scrap,aluminium scrap (02 loc),used copper cable scrap (req. license),frp scrap,stainless steel scrap,plastic scrap, mixed,rubber scrap,all types of used air filter scrap,plastic containers 25 t0 50 ltrs,pvc tank,marine hose with ms flange (02 loc),ni-cd battery,lead acid battery,bunk (container) house

State Government

CTN :38565728

19 Dec, 2024 1.00 Lacs

Srinagar - Jammu And Kashmir

Tender For procurement of garden tools safety equipments at rsgc srinagar - supply of hedge cutter/ shear cutter wooden handle of std size and quality., supply of knife cutter for pruning gardening of standard size and quality, supply of double blade prunning saw of standard size and quality, supply of chain for chain saw size 22" of std quality, supply of chain saw plate 22" size of standard quality, supply of wipper long handle (scotch brite), supply of sickle with wooden handle of std quality and size, supply of two in one garden showel/ d-showel of standard quality, supply of free size over all uniform for spray operations (2xl) (french terocon) industrial boiler suit with reflective tape, supply of spray motor with following specifications:a: engine type: air cooled 4 stroke ohc petrol engine 25 degree inclined cylinder, horizontal shaft cost iron sleeve.b: bore x stroke 68 x 45mm c: displacement 163 cumd: compression ratio 9.0:1e: net power: 3.6kw (4.8 hp)/ 3600 rpmf: cont. rated power 2.5 kw (3.4 hp) 3000 rpmg: max net torque: 10:3 nm/ 1.05 kg fm/2500 rpmh: ignition system: transistorisedi: starting system: recoil starter (electric start optional)j: fuel tank capacity: 3.1 ltrk: full cons at cont rated power 1.4 l/hr-3600rpm l: engine oil capacity 0.6 ltr.m: dimensions (lxwxh) 312x 362 x 346mmn: dry weight 15.1kg.

CTN :38519046

31 Dec, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of copper wire no 18 19 , gate valve heavy duty , bearing 6202 , bearing 6203 , capacitor , fan belt b 99 105reqd for himco , socket 6 group , shaft 5 gear power trac , bearing 6208 , bearing 6008 nr , shifter , sycnroniser , back gear teeth 02 canvas , brake spring , spring bolt , washer plane 24 no , spring washer , nut bolt 5 24 no , nut bolt 1 half 24 no , nut bolt 2 24 no , clipe hose pipe , clip hose pipe half , bucket teeth side , bucket teeth middle , bucket teeth bolt with nut , bracket 1210 , head stud 8 , fan belt b 48 , intermediate shaft s 855 , needle bush , sleeve for outer shaft , out put shaft , needle roller , coupling for shaft , gear box packing , bearing 32008 n , drill chuck teeth machine , bearing 6008 no , gear lever s 855 , thermostat , hose pipe s 855 , fan belt , blade rotavator , nut bolt rotavator , intermediate shaft , sleeve , shifter fork , needle bearing s 855 , pto shaft rotavator , steering oil tank s 855 , pipe for steering oil tank , universal joint 100 mm , pto shaft complete for rotavator , harrow disc 24 , pressure washer washing pump , feed pump n h , clutch plate s 855 , cross with body alternator , nut bolt 3 3 8 , rubber sheet 1 8 4 3 , angle iron 2 1 4 , m s round , diesel tank cap bid number/ ( ( ) ): gem/2024/b/5684618 dated/* : 10-12-2024 bid document/ 1 1 / 50

CTN :38554819

03 Jan, 2025 1.50 Lacs

Jhansi - Uttar Pradesh

Tender For supply of water ro plant installation - ro water plant , water storage tank , mud candle , ro stand , iron fancing , automatic cutoff , installation

CTN :38602015

06 Jan, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of cpvc plain tee 25 mm x 20 mm , cpvc feemale thread adopter 15 mm x 20 mm , cpvc plug 15 mm , cpvc huck , cpvc elbow plane 20 mm x 25 mm , cpvc plane elbow 20 mm , cpvc socket plane 25 mm , cpvc reducer 25 mm x 20 mm , cp cup 15 mm, stainless steel , cp nipple 15 mm x 25 mm , cpvc end cap 25 mm , cpvc end cap 20 mm , cpvc cross bend 20 mm , cpvc cross bend 15 mm , long bend for cistern , solvent solution , waste coupling , suction valve 1 inch for water pump , inlet flexible pipe 1 inch , outlet flexible pipe 1 inch , fevicol ddl , puf panel insulated door of size 0.75 x 1.95 mtr, 40 mm thick including all fitment items , corrugated galvanised iron sheet size 10 feet x 3 feet x 0.63 mm thick, make jindal or tata or sail , corrugated galvanised iron sheet size 8 feet x 3 feet x 0.63 mm thick, make jindal or tata or sail , fiber reinforced plastic septic tank 2000 ltr capacity, cylinderical shape , hardwood scantling 3 inch x 2 inch x 10 feet long without knot well seasoned wood free from decay, fungal growth and without splits and cracks , hardwood scantling 2 inch x 2 inch x 10 feet long without knot well seasoned wood free from decay, fungal growth and without splits and cracks , hardwood scantling 3 inch x 3 inch x 10 feet long without knot well seasoned wood free from decay, fungal growth and without splits and cracks , hardwood planks 10 feet x 10 inch x 1.5 inch without knot well seasoned wood free from decay, fungal growth and without splits and cracks

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

CTN :38592052

06 Jan, 2025 NA

Dantiwada - Gujarat

Tender For auction for disposal of various items of scrapped/unusable civil and electrical scrap- scrap pile of electronic items-1 , scrap heap of different items of paper and aluminum 1 , scrap heap of different items of bead-1 , scrap pile of different iron items-1 , different types of plastic scrap heaps- , different types of waste wood piles 1 , heap of broken plastic syntex tank no.14 , scrap heap of paper barrels 1 , scrap heap of brass items 1 , aluminium/copper electric choke pile 1 , mix electric materials (switches, capacitors, boards, etc. pile-1 , aluminum copper wire pile 1 , pvc electric fitting pipe stack 1 , electric aluminum (70th / 150th / 250th tubelight) scrap pile 1 , electrical iron scrap heap 1 , electric cable wire scrap heap 1

Insulation Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government