Latest insulation varnish Tenders | Government insulation varnish Tenders

State Government

CTN :40314448

14 Aug, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v

Central Government/Public Sector

CTN :41121589

14 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of crngo - 0.5 mm x 560 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 630 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 710 mm x coil crngo steel sheet; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 790 mm x coil crngo steel sheet; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 890 mm x coil crngo steel sheet; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 1015 mm x coil crngo steel sheet; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916rev 08 (grade 50c350). coating thickness should be as per clause 3.3(b) of spec aa10916., 0.5 mm x 1060 mm x 1060mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3b of spec- aa10916., 0.5 mm x 1130 mm x 1130mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3b of spec- aa10916., 0.5 mm x 1235 mm x 1260mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10916 rev 08 (grade 50c350). coating thickness should be as per clause 3.3b of spec- aa10916., 0.65 mm x 560 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 630 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 710 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 790 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917rev 07 (grade 65c530). mtc must be furnished along with each lot of delivery, 0.65 mm x 890 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917rev 07 (grade 65c530). mtc must be furnished along with each lot of delivery, 0.65 mm x 1015 mm x coil crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 920 mm x 920 mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 970 mm x 970 mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties as per material specification aa10917 rev 07 (grade 65c530)., 0.65 mm x 1060 mm x 1060 mm crngo steel sheet ; both side insulated crngo steel with insulation thickness and other properties

Central Government And Public Sector

CTN :39752667

02 Aug, 2025 NA

Damanjodi - Odisha

Tender For bid to ras supply of high build epoxy insulation floor coating

CTN :41279847

07 Aug, 2025 NA

Gonda - Uttar Pradesh

Tender For supply & fitment of items for cab ac maintenance of electric locos at loco shed gonda cons isting of 5 items -01 set: (i) change over switch 4 pole 415v 40 amp. - 25 nos. (ii) super enameled copper wire 30 swg -20 kg. (iii) bearing 6002 - 50 nos. (iv) insulating paper -4 kg. (v) insulation varnish -3 kg. [ w arranty period: 30 months after the date of delivery ]

CTN :41146373

11 Aug, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of nano ceramic thermal insulation coating for hot and cold insulation

corporations/Associations/Others

CTN :41160524

04 Aug, 2025 NA

Muktasar - Punjab

Tender For purchase of material for general maintenance of electrical equiments installed at various sub-stations under p&m div malout. - crc 2-26, crc 5-56, crc lectra cleaner, urethane based insulation coating, make: crc or equivalent, pu foam insulation sealent, make: cosmos or equivalent, silicon grease, make: crc or equivalent, battery cleaner, make: crc or equivalent, battery protector, make: crc or equivalent, epr self-amalgamating tape, make: scapa or equivalent

State Government

CTN :41165836

29 Jul, 2025 69.65 Lacs

Delhi - Delhi

Tender For maintenance and electrical consumption charges of street light on pwd road under cnd division (sh- supplying and coating electrical insulation of street light poles, delhi).

CTN :41075431

05 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of modified xletfe white 22awg 19 by 0 point 16 single core , electrical cable copper multi strands silver coated extruded modified xletfe blue 22awg 19 by 0 point 16 single core , electrical cable copper multi strands silver coated extruded modified xletfe white 24awg 19 by 0 point 13 single core , electrical cable copper multi strands silver coated extruded modified xletfe blue 24awg 19 by 0 point 13 single core , heat shrinkable moulded boot straight fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 202k 121 25_01 , heat shrinkable moulded boot straight fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 202 k 142_25_01 , heat shrinkable moulded boot straight fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 202 k 153_25_01 , heat shrinkable moulded boot straight fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 202 k 132_25_01 , heat shrinkable moulded boot y transition fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 342 a 024 20 by , heat shrinkable moulded boot t transition fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma 322 a 134 20 by , heat shrinkable moulded boot 3 way fluid resistance modified elastomer black with inner wall glue by adhesive properties raychem comma pt no 462a_034 , heat shrink tube black 01 inch 12 point 5 by 25 mm raychem dr_25 , heat shrink tube black 3 by 4 inch 9 point 5 by 19 mm raychem dr_25 , heat shrink tube black 1 by 2 inch 6 by 12 mm raychem dr_25 , heat shrink tube black 3 by 16 inch 2 point 5 by 5 mm raychem dr_25 , heat shrink tube black 3 by 8 inch 5 by 10 mm raychem dr_25 , heat shrink tube white 16 by 32 mm , heat shrink tube white 12 by 24 mm , heat shrink tube white 9 by 18 mm , heat shrink tube white 6 by 12 mm , heat shrink tube white 4 by 8 mm , heat shrink tube white 2 by 4 mm , heat shrink tube black 12 by 24 mm , heat shrink tube black 10 by 20 mm , heat shrink tube black 5 by 10 mm , heat shrink tube clear 16 by 32 mm , heat shrink tube clear 12 by 24 mm , heat shrink tube clear 9 by 18 mm , heat shrink tube clear 6 by 12 mm , heat shrink tube clear 4 by 8 mm , heat shrink tube clear 2 by 4 mm , heat shrink tube clear 1 point 3 by 2 point 5 mm , silver plated copper shield braid 16 by 24 mm pmlo , silver plated copper shield braid 10 by 16 mm pmlo , silver plated copper shield braid 6 by 10 mm pmlo , silver plated copper wire mesh 30 mm width pmsr , copper ring tongue terminal comma crimp type tin coated with yellow insulator for 6 mm od shield round braid 7 point 6 mm id x 14mm od x 1mm , stainless steel band for braid crimping as per drg a4_515_drg_54357 , 2 by 3 core shield braid heat shrinkable solder ring splice butt with insulated clear sleeve and both side blue colour tint rings 28_38 awg shsb_1 , 2 by 3 core shield braid heat shrinkable solder ring splice butt with insulated clear sleeve and both side blue colour tint rings 18_22 awg shsb_2 , 2 by 3 core shield braid heat shrinkable solder ring splice butt with insulated clear sleeve and both side blue colour tint rings 14_16 awg shsb_3 , 2 by 3 core shield braid heat shrinkable solder ring splice butt with insulated clear sleeve and both side blue colour tint rings 10_12 awg shsb_4 , 2 by 3 core shield braid heat shrinkable crimping splice butt with insulated clear sleeve and both side blue colour tint rings 24_26 awg //bid details 2 / 57 shsb_4 , 2 by 3 core shield braid heat shrinkable crimping splice butt with insulated clear sleeve and both side blue colour tint rings 18_22 awg shsb_1 point 25 , blue tint for splice joint compound spray acrylic conformal coating ac iii in bectron , kapton tape 24 mm width , insulation tape pvc black 18mm width , s1125 adhesive kit no 8 silicon paste part a _grey part b_blac

CTN :41143357

11 Aug, 2025 NA

Kanchrapara - West Bengal

Tender For ptfe insulated silver plated copper wire , size 1.5 sq. mm. dia with insulation 2.2 mm min, i nsulation lamination 1st coating plastic paper thickness 0.1mm, 2nd coating ptfe, temperature up to 260 degree c, volt 600. use for control circuit of lhb type rmpu as per rdso specification no. rdso/pe/spec/a c/0061-2005(rev-1). supply should be qty. 1/3 black & qty. 2/3 white colour. [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :41145066

04 Aug, 2025 NA

Saharanpur - Uttar Pradesh

Tender For supply and application of high strength monolithic electrical insulation flooring of approved c olor (05mm screed and 1mm floor top) at floor after making surface preparation to make the surface unifor m and leveled before floor coating. details specification and make of material as per annexure -'a'. [ warr anty period: 30 months after the date of delivery ]

Insulation Varnish Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector