Latest intake gate Tenders | Government intake gate Tenders

State Government

CTN :38557579

26 Dec, 2024 NA

Balaghat - Madhya Pradesh

Tender For building material - thanapsakpadah 2 inch pins iron bars tested iron/bars (pap danta j) 8 bars iron/bars (pap danta j) 10 bars iron/bars (pap danta jhd) 12 bds lappatma cement (chbp pap 1489/1991) 50 litres, 53 liters of sand per cubic meter. sand-clean as per standard, ballast 20 mm per cubic meter, ballast 40 mm. per cubic meter, stone dust (sajvadum knej) per cubic meter, murum hard per cubic meter, pottery size of baked brick 94 inch per thousand, brick (sal. i.t.b.) size (94) inch per thousand, sal/bija frame per square feet, palla door q1. 36'x70' feet 30 mm per piece board waterproof laminated, palla door q2. 29'x70' feet 30 mm per piece board waterproof laminated, pipe 1 inch c.p.v.c., l.p 20 feet per piece a pipe 1.5 inch c.p.v.c. 20 feet per piece a pipe two inch c.p.v.c. ? 20 feet per piece a pipe three inch c.p.v.c. 20 ft per piece a plastic water tank four layer 1000 litre per piece ppa plastic water tank four layer 500 litre per piece ppa plastic water tank 6 mm (2x2 ft) per sq. ft. double charge a granite per sq. ft. tata steel profile sheet 4x10 mm 25 gauge (0.5mm), tata steel profile sheet 4x12 mm 25 gauge (0.5mm), tata steel profile sheet 4x14 mm 25 gauge (0.5mm), tmt frame and counterfeiting parts, cement frame 36'x70' per piece, iron frame 36'x70' per piece paver block per piece

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

corporations/Associations/Others

CTN :38465204

18 Dec, 2024 97.5 Thousand

Saharanpur - Uttar Pradesh

Tender For corrigendum : servicing of draft tube gate and intake gate and supply of pulley and power cable for intake gate at khara shp saharanpur

State Government

CTN :38574765

02 Jan, 2025 17.50 Lacs

Udhampur - Jammu And Kashmir

Tender For complete refurbishment & motorization of two no. penstock intake gates with other allied works at forebay of chenani hydro electric project stage i, udhampur (as per detailed scope of work)

CTN :38600919

20 Jan, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of high back leatherette with wheels and height adjustable in brown colour office chair size 56x26x24 inch , office chair leather type with arm rest steel frame without wheels dark brown colour size 39x20x19 inch , revolving office chair leather type height adjustable back support size 39x18x18 inch , door sign red and blue light for office , led advertising illuminated poster display aluminum frame

CTN :38329012

18 Dec, 2024 NA

East Sikkim - Sikkim

Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l

CTN :38588945

03 Jan, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of bust with stand brig uday singh comma col chewang rinchen and capt haneef uddin,steel inauguration plate,solar street light with panel,iron benches,wooden window 2 x 3 feet,front iron sliding gate,wooden door 6 x 3 feet,steel gold plated national emblem,sand model 4 x 6 feet,steel plates of history,flower pots,i love tyakshi letters with green grass mat,heritage park letters with green grass mat,glass showcase with led light,mcb switch,photo frame,martyr name plate,green grass mat,tiles 2 x 2 feet,national flag large 6 x 4 feet and flat pole 20 feet,national flag small 3 x 2 feet,steel boundary pole with chain,dharohar hut letters,indian army, hq 14 corps and hq 102 inf bde logos,construction of boundary wall bricks comma cement comma concrete and iron,labour charge for construction of heritage park

CTN :38588950

03 Jan, 2025 10.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of bidding half round,ply board 6 mm,ply board 6x3 12mm,ply board 8x4 12mm,kundi,door handles,hinges,fiber glass 8 x 4,fiber glass putty,nails 1 inch,nails 1.5 inch,nails 2 inch,screw no 35 and 8,black screw,screw full size,cutter blade,bidding corner,nails no 17,nails no 2.6,ply board 12 mm 8 x 4,ply board 15 mm,locks,screw steel,nut and bolt 2 inch,tube lights,acrylic sheet 8 x 4,tiles 02 feet x 02 feet,cement,pvc roll 10mm,wooden window frame,door 3 feet x 5 feet,book racks,window iron jaali,fans,sitting table,wire casing,electricity wire 90 mtrs,repair and replacement of broken window and doors,tpt and labour charges

CTN :38588868

04 Jan, 2025 NA

Haridwar - Uttarakhand

Tender For supply of projection of bullet hardening windscreen with steel frame, bidding and silicone tube of maruti gypsy,projection of bullet hardening side door glass with steel frame, bidding and silicone tube of maruti gypsy,bullet hardened carbon steel sheel for side door of maruti gypsy,bullet hardened carbon steel for all remaining portion of the vehicle cabin, less roof and floor of maruti gypsy,cutting, welding, denting and painting of maruti gypsy,projection of bullet hardening windscreen with steel frame, bidding and silicone tube of tk 2.5 ton tata,projection of bullet hardening side door glass with steel frame, bidding and silicone tube of tk 2.5 ton tata,bullet hardened carbon steel sheel for side door of tk 2.5 ton tata,bullet hardened carbon steel for all remaining portion of the vehicle cabin, less roof and floor of tk 2.5 ton tata,cutting, welding, denting and painting of tk 2.5 ton tata

Central Government/Public Sector

CTN :38518515

31 Dec, 2024 39.99 Lacs

Cuddapah - Andhra Pradesh

Tender For construction of rooms and shelter at velpula ground earth work in excavation by mechanical means , providing and fixing float valve , filling by brought out excavated earth in layers , providing and laying in position pcc, supplying and filling in plinth with sand, providing and laying in position specified grade of rcc, shuttering in foundations, footings, bases of columns etc, shuttering in in superstructure columns, steel reinforcement for rcc, providing and applying plaster of paris putty of 2 mm , applying priming coats with primer , wall painting with acrylic emulsion paint of approved brand , finishing walls with 100 per premium acrylic emulsion paint , white washing with lime to give an even shade, structural steel work, brick work with common fly ash bricks, half brick masonry with non modular fly ash bricks , 15 mm cement plaster, providing and fixing cp brass , providing and fixing c.p. brass stop cock , providing and laying ceramic glazed floor tiles , providing and fixing isi marked flush door shutters , providing frosted glass panes 4 mm thick, providing and fixing factory made pvc door frame , 25 mm thick pvc flush door shutters , indian type water closet, providing and fixing white vitreous china pedestal type european type, providing and fixing wash basin , providing and fixing pvc waste pipe, providing and fixing 600x450 mm beveled edge mirror , neat cement punning, with gi barbed wire, providing and fixing on wall face un plasticised rigid pvc swr, providing and fixing gi pipes 20 mm dia nominal bore, providing and fixing gi pipes 40 mm dia nominal bore, providing and fixing ball valve, providing and placing on terrace polyethylene water storage tank , providing and fixing precoated galvanised iron profile sheets , providing and fixing 20mm thick polished, machine cut cuddapah slab, painting with synthetic enamel paint , making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm, making plinth protection 50mm thick of cement concrete , developing lawn including necessary watering

Intake Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector