Latest interactive system tool Tenders | Government interactive system tool Tenders

Central Government/Public Sector

CTN :45025198

07 May, 2026 NA

Hubli - Karnataka

Tender For supply of digital vernier caliper water and dust proof with external measurement range of 0-600 (mm). (a) jaw type- type a - with jaws on both sides for external and internal measurements (b) least count / resolution - 0.01 millimeter (c) accuracy- 0.01 millimeter (d) provided with blade for depth measurement- yes (e) reading 0.01 mm/0.0005 inch degree of protection ip 66, display type - lcd, battery operated. (f) power source - alkaline batteries. (g) material of the main parts of calipers such as beam, sliding jaw and depth measuring blade- hardened stainless steel conforming to is: 3651 (latest) for metallic parts. (h) warranty- 2 years. (i) make: baker/ insize/ mitutoyo/ precision/ starrent (j) calibration certificate to be provided from nabl accredited (k) oem / authorized dealers only to quote with service backup. [ warranty period: 24 months after the date of delivery ]

State Government

CTN :44055546

11 May, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various consumable items for unit 1 to 7, wtps. - fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cable tie for electricals wires & cables., test leads (probes) for digital multimeter, hand drill machine size 13mm, long rang rechargeable torch with charger., rechargeble torch, carbon cleaner spray, fevi kwik tube 3 grams, 16 amp 240 volt, 3 pin plug top, araldite 180 gram/tube, digital vernier calipers size - 0-300 mm mitutoyo make, digital vernier caliper, size - 0-150 mm, freemans make measure tape 15 metre long, fevicol sr 998 (200 ml/tin), fevi bond, champion teflon tape roll size 1/2"x12 mtr, hss hacksaw blade size 300x12.5x0.63 mm, oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., red oxide, light gray paint size 4 liters light gray paint size >> 1 liter., rustolene, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, pin terminal 1.5 mm2, pin terminal 2.5 mm2, fork terminal insulated 1.5 mm2, u type copper lug 2.5 sq.mm, 2.5 mm2 round lugs, ring terminal 1.5 sqmm, emery paper smooth fine size 38 mm x 50 m length, emery paper rough sizesize 220 x 280 mm, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, cable lugs 0.5 mm2 pin type, dowells make, cable lugs 0.5 mm2 u - type, dowells make, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, seamless copper tube -size: 3/8 inch od x 18 swg thickness withstand capacity: 1000 psi ., 1/4 inch od, 18swg thick, anneled pvc sheathed seamless copper tube having minimum 15 meter long, seamless tube a 213 tp316 1/4 inch od x 2.1mm thick, m.seal putty fast curing 100 gms/pack, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), pvc insulated copper unshethed flexible wire 1.0 sqmm,1100v, copper armoured,flexible power cable 3cx1.0 sq. mm., tube cutter, tube bender, copper cable 3 corex2.5 sqmm, power cable 3 corex1.5 sqmm, crc-226 contact cleaner in 415 ml/300 gram spray bottle., puff seal have polyurethene based foam sealing compound, cab

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Central Government/Public Sector

CTN :45011194

15 May, 2026 4.99 Lacs

Multi City - Multi State

Tender For supply of emery paper cloth 150 , emery paper cloth 180 , emery paper cloth 320 , emery paper cloth 600 , teflon tape , multipurpose penetrating lubricant spray 400 ml , industrial grade silicon sealant 25gm , non asbestos gasket sheet non metallic 075mm , o ring kit inch , o ring kit mm , square o ring kit inch , square o ring kit mm , sledge hammer 2 lbs , vernier caliper , thread gauge combined , mechanical bearing puller 6 , mechanical bearing puller 8 , mechanical bearing puller 10 , pneumatic impact wrench , cordless impact wrench , cordless portable hand drill , hydraulic cylinder for puller 50t , electrode 7018 315mm , nozzle tip cleaner , gas cutting torch , cutting nozzle 116 , cutting nozzle 18 , flash back arrestor for oxygen gas torch side , flash back arrestor for acetylene gas torch side , flash back arrestor typecg91oxygrh , flash back arrestor typecg91fuellr , oxygen regulator , acetylene regulator , ball peen hammer 3lbs , ball peen hammer 5lbs , sledge hammer 5 lbs , sledge hammer 10 lbs , gland packing graphite 6mm , white dry asbestos gland packing 8 mm , asbestos graphite gland packing 10mm , 12mm graphite gland rope square cross , gland packing 14mm ptfe , asbestos graphite gland packing 16mm , gland packing extractor , safety torch , cutting wheel 4 , grinding wheel 100x4x16 , grinding wheel 355x28x254mm , chipping hammer , gas welding googles , cable cutter , band saw blade , bolt with nut high tensile set ofm6m8m10m6x2550m8x3050m10x3050 , bolt with nut high tensile set of m12m14m12x406075100m14x5075 , bolt with nut high tensile set of m16m18m16x5075100m18x75100 , plasma nozzle , tin cutter , 3 jaw self centering 300mm chuck , combination plier 6 , water pump plier 10 , safety goggles ) /bid number : gem/2026/b/7473926 * /dated: 27-04-2026 & & / bid document 1 / 51

CTN :44986796

29 Apr, 2026 NA

Gwalior - Madhya Pradesh

Tender For enquiry for purchasing of various equipment's of gwalior testing laboratory gwalior, mpmkvvcl. - temperature scanner, with rtd (2 channel), thermo hygrometer, digital micrometer, digital thermo meter, dumble cutting die spare, steel scale-1 mtr, steel scale-300 mm, 5 meter tap insulator, digital vernier caliper, cut off saw/cutting grinder, stop watch for galvanizing, multi meter, digital weighing balance

CTN :44928435

08 May, 2026 NA

Kavaratti - Lakshadweep

Tender For supply of workshop tools, machinery and accessories to fisheries department, kavaratti island, ut of lakshadweep - square file smooth., square file rough., flat file, rough., flat file, smooth., flat file, rough., flat file, smooth., flat file, smooth., flat file, rough., flat file, smooth., flat file, rough., round file, smooth., round file, rough., round file, smooth., round file, rough., round file, smooth., round file, rough. 8", double end spanner set (mm) 6 mm 32 mm, double end spanner set (inch) 1/4 - 1 1/2", ring spanner set (mm) 6 mm 32 mm, ring spanner set (inch) 1/4 1 1/2", combination spanner set, box spanner set 6 mm 32 mm, pipe wrench, pipe wrench, pipe wrench, pipe wrench, torque wrench, cutting plier 6 , cutting plier 8 , screw driver 10 , screw driver 12 , hollow punch set, stud remover set, cir clip plier 8 inner,, cir clip plier 8 outer, cir clip plier 6 outer, cir clip plier 6 inner, cir clip plier 10 outer, cir clip plier 10 inner, vice grip plier 12 , screw spanner 12 , nose plier 8 , t spanner set (7mm to 14mm) (pack of 8), hex key set, tubular spanner set, indexable parting tool set,, straight round nose turning tool,, high speed steel tool bit (3piece set),, threading & boring tool set,, 4 flute end milling cutter,, taper shank (twist) drill bit,, hss straight shank drill bit set., centre drill bit set., tap and die set.mm., tap and die set. bsw., tap and die set. bsf., drill chuck with arbor., 1/2 inch 1.1mm bsw carbon steel die nut., 5/8 inch 1.1mm bsw carbon steel die nut., pillar / column drilling machine floor type., portable cut off saw., portable welding machine,, metal-arc earthing clamp,, welding holder., 10 ton 3 jaw hydraulic gear puller., 3 ton engine hoist (crane)., bench vice 6 ,, bench vice 12 ,, vernier caliper 0-300mm,, dial gauge indicator with stand,, pitch gauge (mm),, pitch gauge (inch),, piston ring compressor 4 ,, piston ring expander,, nozzle cleaning set,, angle grinder 4 ,, bench grinder,, welding cable,, welding hand shield,, 3 jaw puller,12 ., stainless steel scale 24 , bench grinding wheel(rough),, bench grinding wheel(fine),, air impact wrench, pneumatic type,, arc welding glass (black)., arc welding glass (plain)., arc welding gloves,, safety goggle.

CTN :41540491

27 Apr, 2026 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : supply of multi product calibrator ( 61/2 digit) (pt no 5560a) , insulation tester 500v (pt no-5g/203) , dc power supply (pt no-10k/9331293na) , hand held multi meter 4.5 (pt no-hp3468a) , temperature and humidity indicator (pt no-5a/3820 na) , stand universal (pt no-63b/412 na) , dti stang magnetic (pt no-1b/5168 na) , dial indicator test(pt no-1b/5150 na) , slip gauge (metric) (pt no-63b/62 na) , level spirit adjustable(0-150) (pt no-1b/4235 na) , mirror inspection jointed (pt no- cf143 a) , caliper micrometer inside(2-12" ) ( pt no-1a/2733na) , micrometer outside (0-150mm) (pt no-1a/2732 na) , micrometer inside (caliper type) (pt no-1a/2721 na) , surface plate 36" x48" (pt no-1b/4173 na) , vernier depth gauge (0-200mm) (pt no-1a/3906 na) , cylinder bore gauge (6-10mm) (pt no-1b/4561-5 na) , filler gauge taper mm (pt no-1b/4600 na) , micrometer outside (pt no-1a/9100073 na) , hand magnifying glass (pt no-1b/niv/mg) , clinometer (pt no-1a/4046 na) , combination set (pt no-1b/1816 na) , electronic torque wrench tester (pt no-6c/0101 na) , engineering tool (pt no-1l/0001 na) , quick vice 5" (pt no-1c/2607-1c9506589-na) , tensiometer calibrator (pt no-63b/103 na) , weighing machine (pt no-6c/3849na) , weight 100gm-50 kg (25 in no. ) (pt no-63b/0014 na) , spring balance 1-10 kg (pt no- 1h/niv/sp) , gauge screw thread (pt no-1b/4048 na)

Central Government And Public Sector

CTN :44995629

15 May, 2026 NA

Bangalore - Karnataka

Tender For supply of vernier caliper size: 0-300mm, least count-0.02mm with calibration certificate traceable to nabl . make: mitutoyo / tesa / facom [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :44981289

07 May, 2026 NA

Gautam Budnagar - Uttar Pradesh

Tender For providing of calibration services - electrical, mechanical; voltage, current, power (ac/dc), frequency, power factor, phase angle, resistance, undefined, vernier caliper, stopwatch, ac dc high voltage testor; nabl labs; hybrid (detailed in scope of work)

Central Government/Public Sector

CTN :44998314

15 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of digital vernier caliper with range of 0 to 500 mm, least count of 0.01 mm, accuracy up to +/-0.03 mm carbide -tipped jaws for od and ld measurement, large and clear lcd readout, with thumb roller, supplied in fitted plastic case with necessary calibration certificate to be submitted at least for 1 year validity from nabl or nabl accredited laboratory. [ warranty period: 30 months after the date of delivery ]

Interactive System Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector