Tender For supply of materials for development of a public cemetery and construction of a crematorium in tirthakunde village of khanapur taluka. - rubble stones.,, quarry spalls.,, broken stone aggregate 40 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 12 mm to 10 mm size,, coarse sand (zone iii),, portland cement,., mixer (concrete) - 1 cum capacity.,, silver oak, or equivalent planks 38 mm thick.,, jungle wood runners and plank.,, casurina poles 100 - 150 mm.,, ms flat,., bolts and nuts,, plasticizer / super plasticizer.,., hom of vibrator 0.71 days.,, solid concrete blocks (40x20x20cms) 4.00 n/sqmm, mixer (concrete small used in culvert.), granite / trap broken metal 100 mm and down size, base plate/ base plate, anchor bolts 750mm.,, corbon electrodes.,, welder grade i,, hom of welding and grinding machine.,, add-01, hom of cutting and grinding machine.,, ready mix primer paint (ready mix red lead paint).,, painter class i.,, enamel metal paint.,, unit cost as per the specification,, plastic emulision paint 01, tractor - 40 hp.,, gravel 2.36 mm/murrum,, laboratory asst. (sslc passed)/mate/supervisor,, wheeled dozer (d50 beml),., motor grader 3.35 meter blade.,, water tanker,, vibratory roller 8 tonne,., crushed stone course aggregate 53.,, granite metal 40 mm.,, granite metal 20 mm.,, rcc pipes np2 600mm dia including collars.,, mason class ii (with tools).,., mason class i (with tools).,.,, a 12x12xgauge g.i.wire 100 mtr at ts.800/per m, fitter class i-02, tmt bars including 5 per cent or overlaps and wastage, crane charges., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., tmt bars fe 500,., gusset plates 6 mm thick.
Tender For supplying materials to solid waste management unit at kolur village of koppal district - broken stone aggregate 40mm size., broken stone aggregate 20,mm size., broken stone aggreate 12, mm to 10,mm size, coarse sand (zone -lll), portland, cement., mixer (concrete) - 1,cum capacity., add watering charges, at 1 % on material., silver oak or equivalent, planks, jungle wood,runners and planks, casurina poles, 75 - 100 mm dia, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, plasticizer, / super plasticizer., hom of vibrator 0.71, days., size stone, 20 x 20 x 25 cms., bond stone 20 x 20 x 45, cm, boulders,.,, mixer ( concrete small, used in culvert), mason class l (with tools), mason class ll (with tools), stone, chistler class ll, add watering, charges at 1 % on labor, tmt bars fe, 500, binding, wire, burnt bricks class 35, (non modular), add handling , loading and unloading at 1 % on material, t section,, mullion section,, ms clamps,, handles,, hinges 5 heavy duty,, stays,, tw beading for fixing glass,, reeded glass 2 mm thick,, z section,, fitter class l, welder grade, l, add,., ready mix primer paint (ready miix red lead paint), add wire brush, fine steel wool, putty , sand paper , at 3 % on cost of paint, painter class l, add providing and removing scaffolding at 3 % on labour, mathi/ nandi wood planks for panels 25 mm thick, add cutting and other wastage 5 %, hom, of machinaries for planing, mathi/nandi wood, scantling, broken granite, metal 12.5 mm., broken granite, metal 10 mm., weld, mesh 75 x 25 mm of 6g to 10g., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length, at 4.5 kg per metre., ms angle iron 40mm x 40mm x 6mm, 23 metre in length, at 3.5 kg per metre., gusset plates, 6 mm thick., base plate / base plate.,, anchor, bolts 750mm.,, corbon, electrodes, hom of welding, and grinding machine.,, hom of cutting and grinding machine., enamel metal, paint, add brush at 1 % on cost of paint, tools and plants and electrical charges at 2%, unit cost as per the, specification., enamel paint.,, add brush , putty , sand paper , roller at 5 % on cost of paint, dia 50mm ms hollow pipe b class 14 gauge,., ms square rod,. 16 x 16 mm, ms plates,. 36 mm x 6mm, ms plates,. 40 x 6 mm, cast iron spike,., ball bearing hinges heavy duty.,, anticorrosive,. bituminous paint (black), mechanic class ll / mechanic hmp grade l/eme grade, hom of cutting,. and grinding machine - 1, tools and plants at 2 % on material, transportation loading,. and unloading at 1% on material, rcc cap 1000 mm dia , 100 mm thick, transportation charges of materials beyond 5 km at 10 %, cost of 6.5 mm m, s. coil, fabrication, charges, pvc pipe of 10kg cum,140 mm,., indian type water closet, of size 580 mm of specified make with footrests, trap, 100 mm, s or p, add white lead paint , gasket , cement , sand for making good the wall and floor at 2 % on material, tractor - 40 hp,., electrification,., display board,.
Tender For supply of m sand confirming to is 383-2016 specification for coarse and fine aggregates free fromadherent as per tech att , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is and as per tech spec , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is and as per tech spec , ms binding wire 0.9mm as per tech spec , quick setting compound conforming to is 1344- 2018 make acclerex or cico or fosroc or rapidite , pcc block of size 400mmx200mmxz200mm type c1 1 3 6 using 20 mm graded aggregate , freshly burnt fat lime class c white in colour , cement base paint make snowcem or supercem
Tender For supply for materials for hiremorab village construction of slwm shed building work under mgnrega scheme - mr9945-pintels including welded pins at hiremoraba gp, mr9939-ms sheet 1 mm thick at hiremoraba gp, mr9935-ms cleats with bolts and nuts to rest on pile at hiremoraba gp, mr9934-ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre at hiremoraba gp, mr9933-ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre at hiremoraba gp, mr9928-hooks at hiremoraba gp, mr9925-gusset plates 6 mm thick at hiremoraba gp, mr9924-gusset plates 3.15 mm thick at hiremoraba gp, mr9903-base plate / base plate at hiremoraba gp, mr9901-angle iron 40x40x6mm at hiremoraba gp, mr9900-anchor bolts 750mm at hiremoraba gp, mr9891-tools & plants and electrical charges at 2% at hiremoraba gp, mr9890-locking arrangements at 1% on a at hiremoraba gp, mr9860-12 mm x 6 mm ms plate at hiremoraba gp, mr9859-tools and plants at 2% on material at hiremoraba gp, mr9826-weld mesh 75 x 25 mm of 6g to 10g at hiremoraba gp, mr9804-stone chistler class ii at hiremoraba gp, mr9782-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint at hiremoraba gp, mr9773-add watering charges at 1 % on material at hiremoraba gp, mr9764-add sundries charges at 2 % on material at hiremoraba gp, mr9762-add sundries charges at 1 % on material at hiremoraba gp, mr9759-add providing and removing scaffolding at 3% on labour at hiremoraba gp, mr9757-transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. at hiremoraba gp, mr9754-add hom of welding and grinding machine at 2% on material at hiremoraba gp, mr9753-add handling , loading and unloading at 2% on material at hiremoraba gp, mr9752-add handling , loading and unloading at 1% on material at hiremoraba gp, mr9738-add brush, putty, sand paper at 2% on cost of paint at hiremoraba gp, mr9735-add brush at 1% on cost of paint at hiremoraba gp, mr9725-mason class i (with tools) at hiremoraba gp, mr9724-mason class ii (with tools) at hiremoraba gp, mr9690-painter class i at hiremoraba gp, mr9688-unit cost as per the specification at hiremoraba gp, mr9678-mixer (concrete) - 1 cum capacity at hiremoraba gp, mr9677-mixer (concrete small used in culvert) at hiremoraba gp, mr9676-hom of welding and grinding machine at hiremoraba gp, mr9673-hom of cutting and grinding machine - 1 at hiremoraba gp, mr9672-hom of cutting and grinding machine at hiremoraba gp, mr9640-brick at hiremoraba gp, mr9609-add at hiremoraba gp, mr9607-welder grade i at hiremoraba gp, mr9603-mechanic class ii/mechanic hmp grade i/eme grade at hiremoraba gp, mr9598-fitter class i at hiremoraba gp, mr9586-tractor with trolley at hiremoraba gp, mr9554-tmt bars fe 500 at hiremoraba gp, mr9535-size stone 20 x 20 x 25 cms at hiremoraba gp, mr9534-silver oak or equivalent planks 38 mm thick at hiremoraba gp, mr9522-ready mix primer paint (ready mix red lead paint) at hiremoraba gp, mr9487-jungle wood runners and planks at hiremoraba gp, mr9463-enamel metal paint at hiremoraba gp, mr9455-corbon electrodes at hiremoraba gp, mr9445-casurina poles 75 - 100 mm dia at hiremoraba gp, mr9444-casurina poles 100 - 150 mm at hiremoraba gp, mr9443-cast iron spike at hiremoraba gp, mr9434-burnt bricks class 35 (non modular) at hiremoraba gp, mr9433-broken stone aggregate 40 mm size at hiremoraba gp, mr9432-broken stone aggregate 20 mm size at hiremoraba gp, mr9431-broken stone aggregate 12 mm to 10 mm size at hiremoraba gp, mr9426-boulders at hiremoraba gp, mr9424-bond stone 20 x 20 x 45 cm at hiremoraba gp, mr9408-40 x 6 mm ms plates at hiremoraba gp, mr9402-16 x 16 mm ms square rod at hiremoraba gp, binding wire at hiremoraba gp, display board at hiremoraba gp, coarse sand (zone iii)0982- at hiremoraba gp, water proofing cement paint at hiremoraba gp, portland cement 0367- at hiremoraba gp
Tender For supply of required materials for construction of sanjeevini shed at saluru gp shikaripura taluk shivamogga district - rcc ring 0.90 m dia(sgp sk), rcc concrete cap 1.00 m dia(sgp sk), pvc pipes 10kgf / sqcm 90mm outer dia(sgp sk), chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia(sgp sk), lead or pvc connection pipe 32mm dia (for wash basin)(sgp sk), c.i. / m.s. brackets for flushing cistern(sgp sk), brass stop cock(sgp sk), cp brass waste 32 mm of standard pattern(sgp sk), cp brass chain with plug(sgp sk), copper plated brass piller tap 15mm(sgp sk), white vitreous china clay flat back wash basin size 550x400mm(sgp sk), g.i. overflow pipe 20mm dia(sgp sk), black plastic seat with lid as specified(sgp sk), white glazed/viterous china clay 10lts low lwvwl flushingcistern, with fittings and brackets and 40 mm white c.p. flush pipe(sgp sk), european type water classet of specific make(sgp sk), corbon electrodes(sgp sk), anchor bolts 750mm(sgp sk), base plate / base plate(sgp sk), gusset plates 6 mm thick(sgp sk), ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr(sgp sk), ms angle iron 50mm x 50mm x 6mm 33.8 mtr in length at4.5 kg per mtr (sgp sk), polyenthylene water storage tank of specified capacity l(sgp sk), enamel paint(sgp sk), plastic emulsion paint(sgp sk), border tiles 30 x 10 cms(sgp sk), glazed tiles 300x450(sgp sk), white cement(sgp sk), ceramic tiles of size 30 x 30 cms(sgp sk), sal wood (white)(sgp sk), enamel metal paint(sgp sk), ready mix primer paint (ready mix red lead paint)(sgp sk), ms flat(sgp sk), m.s rods(sgp sk), thick plain glass 5.50 mm (sgp sk), chrominum plated screws(sgp sk), cleat angles(sgp sk), alluminium handles - 15 mm(sgp sk), alluminium tower bolt - 20 cm(sgp sk), pvc edge beading(sgp sk), rubber beading for shutters beading(sgp sk), aluminium window frame section 1.20 mm thick(sgp sk), honnewood planks for panels 20 mm thick(sgp sk), honne wood(sgp sk), vitrified tiles 600x600 mm(sgp sk), solid concrete block (40x 15 x 20 cms)- 5.00 n/sqmm(sgp sk), burnt bricks class 35 (non modular)(sgp sk), jungle wood runners and planks(sgp sk), casurina poles 75 - 100 mm dia(sgp sk), casurina poles 100 - 150 mm(sgp sk), silver oak or equivalent planks 38 mm thick(sgp sk), stone at quarry(sgp sk), boulders(sgp sk), bond stone 20 x 20 x 45 cm(sgp sk), size stone 20 x 20 x 25 cms(sgp sk), binding wire(sgp sk), tmt bars fe 500(sgp sk), plasticizer / super plasticizer(sgp sk), portland cement(sgp sk), coarse sand (zone iii)(sgp sk), broken stone aggregate 12 mm to 10 mm size(sgp sk), broken stone aggregate 20 mm size(sgp sk), broken stone aggregate 40 mm size(sgp sk)
Tender For rrsmp/25-26 purnea/01 - pakka road to adiwasi tola, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, ro
Tender For rrsmp/25-26 purnea/06 - puran shah to farkiya hat (harijan tola), clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., scarifying existing bituminous surfacescarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1)construction of granular sub-base by providing well graded material (crushed stone aggregates and local sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with three wheel 80-100 kn static roller capacity to achieve the desired density, complete as per technical specification clause 401, ( by mix in place method ) for grading ii material, wbm grading 3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., a (by manual means ), prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., tack coatproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., patch work over wbm using mix seal surface for bituminous and existing cc pavementproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen (i.e. 92% of standard bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per irc:sp:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., semi-dense bituminous concreteproviding and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and