Latest iron chain Tenders | Government iron chain Tenders

CTN :43170001

24 Dec, 2025 1.00 Lacs

Surendranagar - Gujarat

Tender For supply of iron pipe square,gi pipie 40 20,fibber sheet 8 4ft,ms flate 3 inch,galvanised sheet 8 4 ft 16mm,iron mesh wire 16ft,plywood 8 4 ft 12mm,plywood 6 4 ft 12mm,dash camera with screen and installed,snake powder,memory card 128gb

CTN :43141037

16 Dec, 2025 12.69 Lacs

Tirupati - Andhra Pradesh

Tender For procurement of materials for improvements and maintenance to animal rescue centre in svzp, tirupati during 2025-26 - cost and supply of m.s tubes and pipes of all diameters including cost and conveyances charges etc. complete , cost and supply of ms plate 16 mm thick including cost and conveyances charges etc. complete, cost and supply of ms plate 10 mm thick including cost and conveyances charges etc. complete, cost and supply of 16 mm dia anchor bolts with washer with check nut including cost and conveyances charges etc. complete (as per quotation), cost and supply of 50x50x6mm ms l angles including cost and conveyances charges etc. complete , cost and supply of 40x40x6mm ms l angles including cost and conveyances charges etc. complete , cost and supply of 25x3mm ms flats including cost and conveyances charges etc. complete , cost and supply of hot dipped galvanised iron chain link mesh 8 gauge - (4.0 mm) as per is: 2721-1979: 4"x4" (102 mm x 102 mm) -8 gauge including cost and conveyances charges etc. complete , cost and supply of 3.15 x 350mm size best arc welding rods including all charges etc.,complete (as per quotation), cost and supply of auto-darkening welding shield with helmet including all charges etc.,complete (as per quotation), cost and supply of welding safety goggles including all charges etc.,complete (as per quotation), cost and supply of leather long welding workshop leather gloves including all charges etc.,complete (as per quotation), cost and supply of 14" inch 355 dia x 3.00x 25.4mm size cutting wheels including all charges etc.,complete (as per quotation), cost and supply of 4" inch 105dia x 1.2 x 16mm cutting wheels including all charges etc.,complete (as per quotation) , cost and supply of grinding wheels 100dia x 60 x 16mm including all charges etc.,complete (as per quotation), cost and supply of toshweld arc 300l weld machine including all charges etc.,complete (as per quotation), cost and supply of vertigo gold 1050w 11000r/min 100mm angle grinder including all charges etc.,complete (as per quotation), cost and supply of hammer - 2 lb size including all charges etc.,complete (as per quotation), cost and supply of dewalt 22mm 3mode hammer drill including all charges etc.,complete (as per quotation), cost and supply of wall drill bit set 6mm to 20mm including all charges etc.,complete (as per quotation)

CTN :42965264

15 Dec, 2025 NA

Lohit - Arunachal Pradesh

Tender For corrigendum : supply of misc cat b stores d d - angle iron indian standard angle of size 75 mm x 75 mm x 6 mm comma material mild steel comma weight 6 pt 86 kg per mtr comma l shaped cross section , barbed galvanised concertina coil having 2 pt 60 mm dia heavy tencil spring with 0 pt 5 mm thick barbed razor 24 inch dia coil and 50 spiral turns per coil , barbed wire 2 pt 5mm comma barb length 13 to18 mm comma barb distance 88 to 112 mm comma surface treatment galvanized comma weight 26 kg bundle comma material iron , bow handle stainless steel door and window handle diagonally shaded 6 inch , door closer spring type ss comma size 6 inch comma suitable for door fitting comma ideal door weight 40 to 70 kg comma material iron chrome finish , door stopper ss comma size 5 inch , dyna screw for window 1 pt 5 inch 100 nos per pkt comma material nickel , galvanised machine screw 40 mm of 100 nos per pkt , bow handle stainless steel 4 inch , ms butt hinges 3 inch heavy duty , ms butt hinges 6 inch heavy duty , ms screw 20 mm pkt of 100 nos , ms screw 25 mm pkt of 100 nos , ms screw 40 mm pkt of 100 nos , ms screw 50 mm pkt of 100 nos , ms wood screw 1 pt 5 inch pkt of 100 nos , ms wood screw 1 pt 25 inch pkt of 100 nos , ms wood screw 1 inch pkt of 100 nos , ms wood screw half inch pkt of 100 nos , ms wood screw 2 inch pkt of 100 nos , ms wood screw 0 pt 75 inch pkt of 100 nos , profiler screw self driven for fixing ppgi sheet 3 inch size , sliding bolt 10 inch stainless steel , tower bolt 6 inch ss , tower bolt 4 inch aluminium , self drill screw 2 inch pkt of 100 nos , self drill screw 3 inch pkt of 100 nos

CTN :43144639

22 Dec, 2025 NA

Imphal - Manipur

Tender For supply of duty of size 20 mm dia , tile cutter blade 4 inch , pointed toe with a wider heel brick trawel of size 5 inches long and 10 inches wide of stainless steel blade , pvc casing capping 32mm wide not less than 2 mm thick , pvc coupler for 32mm casing and capping pipe , pvc tee for 32mm casing and capping pipe , pvc elbow for 32mm casing and capping pipe , pvc corner bend for 32mm casing and capping pipe. , iron cutter blade 10 inch oblique 12 inch oblique 14 inch , mcb db 2 way spn 240 volt conform to is 13032. , mcb db 8 way spn 240 volt conform to is 13032. , mcb 10 a sp 240 volt , mcb 20 a sp 240 volt , mcb 32 a dp 240 volt , exhaust fan 300 mm sweep , transperent made of pvc water level pipe of 8mm of bore and length of pipe is 30mtr , steel alloy steel or carbon steel drop forged brick hammer of wt 450gm to 680 gms , galvanised steel tube mortar pan of semi circular shape of diameter 29 inch thickness , pvc moulded mortar pan of semi circular shape of size 30 inch x 30 inch from top and 16 inch x 16 inch , cotton swing thread for construction should be heavy wt 100 percentage cotton or , stainless steel wire cloth 0.36mm nominal dia of wire and avg width , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ftx12mm thick , water proof plywood commercial bwr grade isi marked of size 4 ft x 8 ft x 19mm thick , second class hard wood scantling 50mm x 75mm , nails 1 inch 2 inch 3 inch 4 inch , pink primer for wooden surface , synthetic enamel paint high gloss superiour quality any shade white colour , thinner for paint romover pack of 01 ltr bottle , painting brush 75 oblique 100mm standard quality , ordinary portland cement opc 43 grade in 50 kg bags , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , non skid ceramic dark coloured tiles of size 600mm x 600mm x 9- 10mm thick , white cement , red oxide primer , self tapping screws with ppdm washer 50mm oblique 75mm oblique 100mm long , silicon gell tube of 29.9 ml to 118.0 ml volume based polymer , silicon gell gun consist of frame hold a tube or cartridge a trigger , chequered cement concrete tiles bullnosed 32 x 32 x 20mm thick , vitreous china water closet eurpoean pattern with integrated foot rests and p trap , pvc connection pipe 600mm long with both side neat of , cp cast copper alloy bib cock long body 15mm bore , cp cast copper alloy stop cock 15mm bore , cp cast copper alloy stop cock angle type 15mm bore , health faucet cp brass 1000mm long with peg stay bracket , factory made solid panel pvc door shutter of 30mm thick with style consisiting of frame made out of ms tube , flush door shutter of 30mm thick with solid core construction , barbed wire , cpvc pipe 25mm , cpvc tee 25mm , cpvc elbow 25mm , cpvc socket 25mm , cpvc union 25mm , cpvc reducer socket , cpvc gate walve 25mm , tenk nipple 25mm , flot walve 25mm , cpvc femail thread socket 25mm , cpvc elbow 20mm , cpvc mail thread socket 20mm , pvc pipe 75mm 10 ft long , pvc elbow 75mm , pvc socket 75mm , adhesiv solvent , cpvc tenk nipple 20mm , sink cupling 32mm , west pipe for sink , gi gate walve 25mm , gi nipple 6 inch 25mm , gi socket 25mm

CTN :43109474

25 Dec, 2025 NA

Chhindwara - Madhya Pradesh

Tender For supply of office stationary and electrical and electronic items d d - mcb pvc box surface mounted , mcb miniature circuit breaker , mcb boxsurface mounted, flush mounted , mcb , miniature circuit breaker , pvc multicore flexible wire annealed copper , electrical pvc surface conduit pipe , pvc conduit pipe elbow , pvc t joint , pvc junction box , pvc flexible pipe , clamp metal , angle holder , battern holder , ceeling rose , switch socket combined box led , one way electical switch , two way electical switch , 3 pin socket , 3 pin plug top , indicator , plastic wall sleeve, wall coumn plug , self drilling screw , pipe saddle clip , cable saddle clips , steel flat head self-drilling screw, jicsaw screw , tungsten filament lamp , banana connector male female , fixed value resitance , colour coding different value, four band , 3 -phase ryb indicator , copper soldering paste flux , soldering wire solder , soldering iron , lugs rectangle , lugs ring type , wire wound variable resistance , electronic choke , wooden board , bare galvanised iron g. i wire , diode in4007 , diode 1n5408 , 3 phase starter for lath machine , contractor set for 3phase induction motor , ictp main switch , nylon flexible straps cable tie , cable holder clips , pvc single strand 1. 5 mm , pvc single strand 2. 5 mm , pvc single strand 40, 0. 2 mm , pvc 3 core cable , pvc 4 core cable , 2 and 3 pin plug , crocodile clips, red-6, black, 6 green-6 , bulb holder , two pin and three pin sockets , cylindrical cells, rechargable, non rechargable , relay , magnetic contactor,3 phase 230v, 20 amp , elcb , transformers , pcb , conductive gloves , diode, 1n4001 to 1n4007 , diode 2n5402 , resistors , capacitors , diodes , inductors , cat5, 5e, cat 6 cable , rj 11 connector , transistors sl100 , transistors npn bc 548 , ic 555 , scr tyn604 si , ic 8038 , smd pcb , co axial cable , audio and video cables , fm receivers kit , ip cleaning solution , hook up wire , ic 7106 , ic 7107 , ic 8051 , ic lm 2576 , ic mc34063 , solar panel , hdmi cable , power cables for pc , microfiber clothes for cleaning , pendrive , anti virus , epson m200 , first aid kit , battery for wall clock , paper , pen blue , pen red , tape cello tape , stapler machine , office file , white chalk , stapler pin , chalkboard duster , synthetic gum , file tag, lace , file folders for office , basta clothes , white board marker pen , white board marker pen ink , permanent marker pen , whitener for correction

corporations/Associations/Others

CTN :43110490

29 Dec, 2025 3.68 Lacs

Thane - Maharashtra

Tender For (96889) providing and fixing corrugated galvanised iron sheets at nocil naka uhp in ghansoli ward

CTN :43062435

19 Dec, 2025 7.50 Lacs

Nandyal - Andhra Pradesh

Tender For providing galvanized iron chain link mesh wire fencing to dhobi ghat at banaganapalle road in bethamcherla nagara panchayath

Central Government/Public Sector

CTN :43081658

27 Dec, 2025 NA

Mumbai - Maharashtra

Tender For notice inviting tender for annual rate contract for supply of hose and hose clamp at rcf trombay unit - hose clamp, size: 3". worm drive type. moc: ss304, conforming to is 4762 (latest rev.), make: klipco/ equivalent., hose clamp,size: 2",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose clamp, size: 1",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose pvc,size:3/4" id x 2.5 mm thickness, conforming to is 15265(2003),moc:pvc,nylon wire braided between 2 layers of pvc,flexible transparent, working pressure: 7 kg/cm2,make: billion / duplon / dunoflex or equivalent, hose pvc,size:1" id x 3 mm thickness, conforming to is 15265(2003), moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose pvc,size:2" id x 6 mm thickness, conforming to is 15265(2003), moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, rubber hose, size: 5/16" id.,conforms to is 447 std(latest rev.), service: oxygen gas for industrial welding,colour - blue, make:duplon / iol or equivalent, steam hose,size: 3/4",3 ply, double wire braided suitable for steam working pressure of 12 kg/cm2 & temperature 200 deg.cent.conforming to is 10655 & bs 5342..., steam hose,size:1",3 ply,double wire braided suitable for steam working pressure of 12 kg/cm2 & temperatur 200 deg. cent., conforming to is 10655 & bs 5342..., hose clamp, size: 1/2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 3/4",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp,size: 1",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose clamp,size: 1.5",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 3",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose pvc,size:1-1/4" id x 4.5 mm thickness,moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose clamp, size: 2-1/2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose pvc,size:1" id x 4.5 mm thickness, conforming to is 15265(2003),moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose pvc,size: 3" id x 6mm thickness, conforming to is 15265(2003),moc: pvc ,nylon wire braided, suitable to withstand vacuum of 600mm hg & temperature of 70 deg c..., hose clamp, size: 1.5",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., p.v.c.hose pipe with reinforemont suitable for 5 kg/mc2 size : 1 1/2" ., pvc hose 1/2" i.d. suitable for 6 kg/cm2 nylon rein ced

CTN :43083289

20 Dec, 2025 28.79 Lacs

Guntur - Andhra Pradesh

Tender For providing galvanised iron chain link mesh for fancing to above compound wall and providing interlocking tails in compound premises to urban health center at sarada colony uphc in div no.53 under ae-14 section

State Government

CTN :43083623

22 Dec, 2025 NA

Sidhi - Madhya Pradesh

Tender For galvanised pole and chainlink fencing - laying and jointing pvc pipe. heading, galvanized steel chain link fence, fabric size 100x100 mm, thickness 4mm, height 10 feet, galvanized steel chain link fence, fabric size 100x100 mm, thickness 4mm, height 8 feet., angle iron pole 12 feet height 50*50*5, weight 14kg with 6 holes., angle iron pole 10 feet height 50*50*5 weight 11 kg with 6 holes.

Iron Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government