Latest iron pillar Tenders | Government iron pillar Tenders

corporations/Associations/Others

CTN :45038884

05 May, 2026 NA

Daman - Gujarat

Tender For auction sale of used empty plastic drum,waste and scrap of paper and paking material (carton),used empty iron drum,waste and scrap of pet ( colour grinding ),waste and scrap of pet ( clear gatta ),waste and scrap of pet ( colour gatta ),waste and scrap of pet ( clear bhusi ),waste and scrap of plastic ( pp mix colour gatta),waste and scrap of plastic ( pp colours grinding with pu chemical),waste and scrap of plastic ( pp colours grinding with foil ),waste and scrap of plastic ( pp colour bhusi )

CTN :45024720

19 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of stud titanium m 42 x 260 , washer titanium size 12 , stud titanium m 36 x 190 , nut titanium m 24 , nut titanium m 14 , handle , brass , chest or lifting 4 , stud titanium m 30 x 190 , lip piece scupper discharge diameter of pipe 5 no no of screw6 , decelerating unit for 0413/9709257 , valve grinding paste coarse , allu.alloy pop revit 2.3mm x 50.5mm , packing material hemp 7/8 (22.2mm) square , bushing rubber 2 unit type k , 180-360 kgs(soft) , neoprene rubber sheet thick 12.5mm (1/2) width 1mtr , neoprene rubber sheet 9.5mm (3/8) width 1mtr , rubber beading for ramp well 59 x 10 cm for trv , mount resilient typep7d(1542kh)mkll shock/vibration mounting , lip piece scupper discharge dia pipe 2 no of screw 3 , gasket asbestos joint steam & water drum 406.4x25.4x4.80mm , paper gasket oil proof jointing , pin drop nose c/w key chain and s books 7/16 d , pin drop nose c/w key chain and s hooks 3/4 d , hydraulic door closer , mortise lock 6 lever open-in right hand , pad locks iron galvanised (65mm) 2-1/2 , nails steel wire brad swg17 length 3/4 , hasp staple steel 125mm , hasp & staple 6 , padlock iron galv 4 levers with male keys 40mm , glip butterfly tapped 3/4 gun metal for hatch covers , nut butterfly nb open type m6 , nut butterfly nb close type m6 , washer titanium size 10 , stainless steel counter sunk screw (10x1.50x35mm) , packing hemp 1/2 square (12.7mm)

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042588

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] special repair 85060260069 bvzc [2] cr 85019460052 bvzc [3] cr 85019650217 bvzc [4] special repair 85069660242 bvzc [5] nr 85030160023 bvzc [6] special repair 85069656917 bvzc [7] ser 85079660300 bvzc [8] wr 85080450457 bvzc [9] ser 85079760031 bvzc [10] nr 85039600360 bvzc [11] wr 85080160233 bvzc [12] ecr 85100360018 bvzc. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (113.460 mt) is the lot quantity (113.460 mt ) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighatarea beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45034361

14 May, 2026 10.00 Lacs

Osmanabad - Maharashtra

Tender For supply of providing and supply of rooftop mounting structure , providing and supply of array junction box , providing and supply of cut models of photo voltaic cell assembly , providing and supply of cut model of lead acid battery , providing and supply of sun path finder , providing and supply of solar dc pump 1 hp , providing and supply of screw driver insulated , providing and supply of punch centre , providing and supply of hammer cross peen with handle , providing and supply of pipe vice cast iron with hardened jaw open type 100 mm , providing and supply of table vice , providing and supply of gauge wire imperial mm , providing and supply of crimping tool , providing and supply of pliers side cutting , providing and supply of wire stripper adjustable length , providing and supply of tool kit box portable 5 comparment , providing and supply of allen key set , providing and supply of scissors blade , providing and supply of lamp tube light cfl, led light, heater and geyser isi , providing and supply of torque wrench , providing and supply of pipe cutter to cut pipes 5 cm , providing and supply of multi meter analog microa to 10a dc and ac , providing and supply of load bank variable , providing and supply of wire cutter and stripper 150 mm , providing and supply of earth plate , providing and supply of tap set 25 mm set in box , providing and supply of trolley for transportation of batteries , providing and supply of lux meter , providing and supply of magnetic flux meter 0-500 tesla , providing and supply of tong tester clamp meter , providing and supply of soldering iron , providing and supply of temperature controlled soldering iron 50 watt, 230 volt , providing and supply of thermometer digital 0 c 150 c , providing and supply of magnetic compass 100 mm , providing and supply of frequency meter 45 to 55 hz meco , providing and supply of inverter with battery , providing and supply of lead acid battery 12v 40ah, 75ah , providing and supply of lead acid battery 12 10 amp. portable in box 100 ah , providing and supply of motorized bench grinder , providing and supply of battery charger , providing and supply of dc table fan , providing and supply of a.c. voltmeter mi 0 500v ac portable in box , providing and supply of volt meter 0 - 30v portable in box , providing and supply of volt meter 0 - 100v portable in box , providing and supply of ammeter mc 0-1 amp. portable in box , providing and supply of ammeter mc 0-5 amp portable in box , providing and supply of ammeter mc 0-20 amp centre zero portable in box , providing and supply of ammeter mc 0-50 amp centre zero portable in box , providing and supply of power factor meter , providing and supply of rheostat , providing and supply of ac energy meter , providing and supply of kilo wattmeter analog portable in box , providing and supply of digital wattmeter , providing and supply of phase sequence indicator , providing and supply material keeping rack

CTN :45025379

04 May, 2026 NA

Katihar - Bihar

Tender For supply of iron safe 03 locker make-godrej or similar configuration safe deposit box / cabinet - for safe keeping of paper / cash / documents type an individually secured container for paper / cash / documents constructions double cabinet type ? cabinet inside cabinet comprising of an external cabinet and internal cabinet for body as well as door number of drawers n.a assembly of components by combination of bolting , welding and riveting or screwing elding by annual rate contract welding conforming to is 816/latest number of shelves 2 main locking arrangement no secondary locking no snap shut mechanism on door no annular sealing gasket between inner body and door n.a fire seal no key retention mechanism in drawers n.a sensor to detect attack on safe using tools (power hammer, power drill or similar) na alarm transmission from inside of safe (safe is in locked condition) n.a alarm transmission n.a minimum battery life n.a time bound health monitoring n.a encrypted communication between safe and alarm panel (at least aes-128 bit) n.a distance of alarm panel from safe n.a method to arm / disarm n.a alarm panel alerts for burglary attempt no alarm panel alerts for panel tempering no wireless sensor communication usinge unlicensed band carrier frequencies n.a number of telephone numbers that can be programmed to receive alarm alerts in the form ofvoice and / or sms n.a anti fishing mechanism for coin slot no snap shut mechanism for drawer no bolt detent mechanism for main door no material for internal cabinet steel material for external cabinet steel door material steel shelves material steel handle material zinc base alloy type of main lock 6 lever dual control type of secondary lock no secondary lock number of locks no lock depository drawer lock n.a inside height of safe 10mm 560 mm inside width of safe 10mm 362 mm m inside depth of safe 10mm 355 mm external height of safe 10mm 764 mm external width of safe 10mm 505 mm external depth of safe 10mm 540 mm inside height of top drawer n.a packing corrugated sheet packing marking n.a marking of key n.a surface finishing n.a warranty periods 1-year [ warranty period: 30 months after the date of delivery ]

CTN :44965134

01 May, 2026 25.00 Lacs

Rewari - Haryana

Tender For corrigendum : 4th time purchase of material required for making of revolving chair, iron almirah, steel rack and book shelf etc. for the year 2026-27.

Iron Pillar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others