Latest iron pipe Tenders | Government iron pipe Tenders

Central Government/Public Sector

CTN :44330926

13 Apr, 2026 NA

Raigarh - Chhattisgarh

Tender For corrigendum : supply of supply of cast iron pipes for ash handling system for lara stpp stage ii 2x800mw chhattisgarh : - engineering, manufacturing, inspection, shop floor testing, shop floor painting, packing and transportation to site of 10 inch cast iron pipes as per is 1536, class d , engineering, manufacturing, inspection, shop floor testing, shop floor painting, packing and transportation to site of 10 inch cast iron pipes as per bs 1211, class d , engineering, manufacturing, inspection, shop floor testing, shop floor painting, packing and transportation to site of 12 inch cast iron pipes as per is 1536, class d , engineering, manufacturing, inspection, shop floor testing, shop floor painting, packing and transportation to site of 12 inch cast iron pipes as per bs 1211, class d , total freight transportation charges for the complete scope

CTN :44761203

10 Apr, 2026 99.7 Thousand

Hamirpur(Hp) - Himachal Pradesh

Tender For restoration of rain damages under lwss chamlana in tehsil sujanpur distt. hamirpur (hp) (sh:- repair of pipe line leakage by butt welded joints of various dia)

State Government

CTN :44761793

21 Apr, 2026 2.07 Crore

Ujjain - Madhya Pradesh

Tender For fabrication and installation of heavy weight ms pipe, welded mesh, and ms plate barricades with antique finish at shri mahakaleshwar temple, ujjain (second call)

CTN :44733975

23 Apr, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of galvanised iron pipe electric resistance welded screw both end fitted with socket on one end other p

CTN :44323049

04 Apr, 2026 NA

Delhi - Delhi

Tender For bid to ras corrigendum : supply of gate valve, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm , ss cromium plated drapery rod 25mm dia with end brackets as per sample 1. 4 mm thick , sprindle valve half turn15 mm , cp grating 127 mm , cp brass extention nipple for 15mm bore 65mm long , ss handle 28mm dia 18 inch long , cast brass float valves plunger type 20 mm , float valve pvc 15mm complete with suitable rod and ball , wash hand basin 550 x 400 mm vit china ware , ewc single piece vitrous china ware complete , china ware glazed water closet euorpean type with s trap110mmx110mm , china ware glazed water closet euorpean type with p trap , helical door spring 300mm , glass self assembly consisting of 5. 5mm thick steel glass shelf 12 cm chromium plated bracket guard and railing 60 cm long complete , glass sheet plain 5 mm thick transparant size 8 feet x 4 inch , front glass shelf size 500 x125mm x 06mm thick with chromium plated frame , plain looking mirror with shelves size of18 inch x 20 inch with 06mm thick , pvc mirror cabinet 450 x 350x120mm pvc complete set , corner glass shelf size 300mm with chromium plated frame , bathroom mirror cabinet 555 x 350 x 120 mm pvc white colour , door handle set with double action single lever mortice lock , ss tower bolt 200 mm, bolt dia 10mm and barrel dia 11mm, isi marked , aluminium anodised tower bolts of extruded sedtion of 150 mm long , aluminium sliding door bolt 250 mm long, rod not less than 16mm dia, isi marked , floor door stopper of alluminium alloy body at tongue anaodised overall length 140mm with hard drawn spring , ss butt hinges 100 mm , s s butt hinges 75 mm, isi marked , aluminium anodised tower bolts of extruded sedtion of 250mm long , door handles alum alloy anodis 150mm , aluminium anodised tower bolts of extruded sedtion of 300 mm long , aluminium anodised tower bolts of extruded sedtion of 100 mm long , aluminium tower bolt 200 mm, bolt dia 10mm and barrel dia 11mm, isi marked, , mild steel sliding door bolt 300 mm long, rod not less than 16mm dia, isi marked. , pvc waste pipe 32 x 750 mm long with flunge 40 mm superior quality , pvc connection 15 x 450 mm , pvc connection pipe 15 x 600 mm , pvc connectors 15mmx600mm , pvc pipe for geyser 18 inch long with brass nut ends , s s connection for gyser inlet and outlet 450mm x15mm , cp connection for geyser 15 x 600 mm , waste coupling cp brass 40 mm , waste coupling cp brass 50 mm , waste coupling cp brass 32 mm , block board 18 or 19 mm thick of size 8 feet x 4 feet , prelaminated particle board 19 mm thick of size 8 feet x 4 feet , plywood 12 mm thick of size 8 feet x 4 feet bwr grade , prelaminated particle board 12 mm thick of size 8 feet x 4 feet , plywood 6 mm thick of size 8 feet x 4 feet bwr grade , plywood 4 mm thick 8 feet x 4 feet , teakwood beading, 4mm thick, 20mm wide 3 mtr long , lakh dana , fevicol , polish french , synthetic enamel paint white , paint synthetic enamel smoke gray first quality , paint white , hasp and staple 100mm , cast brass float valve 15 mm with ball and rod complete , gi tubing medium grade 20 mm dia , gi tubing medium grade 15mm internal dia , tubing gi med gde 25mm dia , gi union 25mm isi mark , gi tee 20mm isi mark , gi union 20mm isi mark , gi elbow 25mm , gi tee 25 mm isi mark , gi reducing socket 15 x 20 mm isi mark , gi nipple 15mm bore x 150 mm long isi mark , pvc waste coupling 32mm , gi socket 25mm isi mark , gi tee 15mm isi mark , gi union 15mm isi mark , gi reducing socket 15 x 25mm isi marked , gi elbow 20mm isi mark , nail various size , gi elbow 15mm isi mark , magic eye //bid details2 / 97made of alluminium , teflon tape big size , lock for almirah six liver 12 x 06 x 06cm , cp handle for almirah 42mmx128mm , gi socket 15mm isi mark , gi nipple barrel size of 20x100mm , alluminium anodised 40 mm dia cupboard knobs , glass putty , magnetic catcher made of alluminium, suitable for cup board shutter size 2 inch

Corporations And Associations And Others

CTN :44700648

07 Apr, 2026 13.76 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi - supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg

State Government

CTN :44738565

08 Apr, 2026 4.14 Lacs

Nirmad - Himachal Pradesh

Tender For sh dismantling of butt welded 65 mm dia g.i. pipe 400 rmt. and s s g.i. pipe 65 mm dia 1310 rmt, from chambi to sadaghrat, relaying of g.i. pipe in butt welding from sunara khad to sadaghrat, khrabagra, ropdu nallah dhamota nallah and from vil

corporations/Associations/Others

CTN :44727584

10 Apr, 2026 NA

Noida - Uttar Pradesh

Tender For auction sale of pvc water tanks, pipes etc,as per lot description,aluminium false ceiling channels, as per lot description,g.i (galvanized iron) false ceiling sections, ducts etc, as per lot description.,m.s (mild steel) pipes, angles, sheets etc, as per lot description.,c.i (cast iron) pipes, as per lot description

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

CTN :44699292

16 Apr, 2026 1.79 Crore

Haldwani - Uttarakhand

Tender For supply of three seater bench , table for opd , table , visitor chair , locker tower type , steel almirah , rack for pharmacy , fowler bed , office table , bed for doctors and nurses , table round type , book shelf , patient attendent bed , podium , table and chair for exam hall , table for exam office room , two seater chair , rack , table for cafeteria , dining table , chair for cafeteria , revolving chair high back , revolving chair low back , three seater chair , chair for student , office table executive , revoloving chair highback , office table with attachment , revolving chair midback , stretcher trolley , wheel chair , dressing trolley , open rack , auditorium chair (v2) (q2) customized three seater bench overall height shall be = 755 10 mm, overall depth = 710 10 mm & overall width = 1750 10 mm., table ( for opd medical instrument) overall size w900 x d600 x h750, table ( size 1500 mm (l) x 750 mm (d) x 750 mm)(h), visitor chair with arm overall height = 890 10mm(h), overall depth = 645 10mm(d), locker tower type dim - 380w x 450d x 1830h mm, 6 door, steel almirah overall size shall be 916mm(w)x486mm(d)with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength)x1981mm(h), rack for pharmacy overall size shall be 914mm(w)x320mm(d)x1742mm(h), fowler bed mechanically operated by smooth crank system, adjustable back rest, operated smoothly by foldable screw handle, office table overall size 1200mm x 750mm x 750mm, bed (for duty doctor / nurses) overall dimension - 2100mm (l) x 900mm (w) the construction of the bed shall be supplied in knock down with metal frame made out of ms/crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos., table round type overall size dia. 900mm x 750mm. the top of the table shall be made ) /bid number : gem/2026/b/7400352 * /dated: 30-03-2026 & & / bid document 1 / 35

Iron Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Corporations And Associations And Others

State Government

corporations/Associations/Others

Central Government/Public Sector