Web Analytics Made Easy - StatCounter

Iron Removal Filtration Machine Repair Tenders

Get complete information related to latest Iron Removal Filtration Machine Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Iron Removal Filtration Machine Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Iron Removal Filtration Machine Repair Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45408536 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For supply of rustonil fz 105, water based rust remover cum rust protector solution, having coverage area of solution as 0.58 ltr./10sq.mtr. with acidic content of 13.30 gm/ltr., ph of 1.34 density of 1.2 gram/cm3 and viscosity of 0.16 stocks. make trimurti (india) . [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45263804 Due date: 12 Jun, 202612 Jun, 2026 4.63 Crore
Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45373220 Due date: 13 Jun, 202613 Jun, 2026 NA
Tender For supply of mobilisation and de-mobilization , boring upto 20 m , boring beyond 20 m , std penetration test , dynamic cone test , soil tests permeability bore hole , soil tests percolation , soil tests electrical resistivity , soil tests atterberg limits , soil tests natural water content , soil tests dry and bulk density , soil tests specific gr and void ratio , soil tests grainsize analysis - sieve , soil tests grainsize analysis - hydrometer , soil tests cbr - soaked , soil tests cbr - unsoaked , soil tests proctor density , soil tests crushing strength , preparation and submission of report , soil tests triaxial - drained , soil tests triaxial - undrained , soil tests consolidation , soil tests chemical - soil sample , soil tests chemical - water sample , plate load test

CTN :45384450 Due date: 16 Jun, 202616 Jun, 2026 NA
Tender For purchase of chemicals - purchase of chemicals, griseofulvin ( 98% purity) (5g), yeast extract-malt extract agar (isp2) (dehydrated medium)( 500 gm), oatmeal agar (isp3) (dehydrated medium) ( 500 gm), inorganic salts starch agar (isp4) dehydrated medium( 500 gm), glycerol-asparagine agar (isp5) (dehydrated medium)( 500 gm), ethyl acetate (ar grade) (2.5l), methanol (hplc grade) (gradient grade) (2.5l), chloroform (stabilized) (2.5l), n-hexane (low residue) (2.5l), dimethyl sulfoxide (dmso) (cell culture tested)( 250ml), acetone (low water content)( 1l), acetinitrile gradient grade (2.5 l)

State Government

CTN :45367498 Due date: 19 Jun, 202619 Jun, 2026 NA
Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

Central Government/Public Sector

CTN :45365796 Due date: 27 Jun, 202627 Jun, 2026 11.50 Lacs
Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

CTN :45366921 Due date: 19 Jun, 202619 Jun, 2026 NA
Tender For supply of sodium hypochlorite 5 percent , 2 propanol 45 gm 1 propanol 30 gm ethyl hexadecyl dimethyl ammonium ethyl sulphate 0.2 gm with skin protecting substances 500 ml bott with dispenser , chloroxylenol solution potassium hydroxide 13.6g chloroxylenol solution 50.5g oleic acid 7.5ml castor oil 63.0g terpineal 100ml ethanol 96 percent 200ml purified water freshly , chlorhexidine solution containing chlorhexidine gluconate bp 7.5percent vv cetrimide bp 15percent wv 500 ml bott , paraformaldehyde tab , pancreatic enzyme supplement with a lipase content of 25000 units or more cap , tab tenofovir 300 mg , antacid gel each 5ml containing dried aluminium hydroxide gel ip 250mg magnesium hydroxide nf 250mg and methyl polysiloxane 50mg bottle of 170 ml , ursodeoxycholic acid 300 mg tab , pantoprazole 40 mg plus domperidone 10 mg susteined release tab , ethinyl estradiol 30 mcg plus drosperinone 33 mg, tab , ethinyl estradiol 0.035mg, cyproterone acetate 2mg pack of 21 tablets , doxylamine succinate 10mg usp plus pyridoxine hydrochloride 10 mg ip tab , mifepristone 200 mg tab , natural micronised progesterone 100 mg tab , dinoprostone gel 0.5mg in 3gm or 2.5ml gel syringe , levonorgestrel 0.25 mg plus ethinylestradiol 0.03mg pack of 21 tab , oestradiol valerate 2mg tab pack of 28 , inj human insulin analogue aspart premix 30 insulin 70 insulin protamine aspart suspension 100 iu ml monocomponent insulin,recombinant dna origin 3 ml pfs , flurbiprofen sodium ophthalmic soln 0.03percent vial of 5 ml , loteprednol etabonate 0.5percent bott of 5 ml , hydroxy methyl cellulose 2percent 2 ml inj , dorzolamide 2percent, eye drops , atropine sulphate 1percent wv bott of 3 ml , betahistine dihydrochloride 8mg tab , chloramphenicol 5percent wv, clotrimazole 1percent wv betamethasone 0.25 percent wv, lignocaine hcl 2percent wv in bott of 5 ml , nasal decongestant adult dropsxylometazoline hcl 0.1percentnasal drop bottof10 ml , salmeterol 25 mcg plus fluticasone 125 mg mdi , 120 doses , levo salbutamol syrup 1 mg 5ml bottle of 100 ml , etizolam 01.5 mg tab , budesonide 160 mcg plus formoterol 4.5 mcg multidose device, 60 doses per unit , formoterol 20 mcg plus budesonide 0.5 mg respules , syrup codeine phosphate 10 mg plus chlorpheniramine maleate 4 mg per 5 ml, bottle of 100 ml , syrup terbutaline sulphate 1.25 mg plus bromhexine hcl 4 mg plus guaiphenesin 50 mg per 5 ml bottle of 100 ml , apd fluid 2.5percent 05 ltr bag with minicap , drain bag for automated peritoneal dialysis, 15 ltr closed system , amoxycillin 500 mg plus clavulanic acid 125 mg tab , ampicillin 500 mg inj , moxifloxacin 400 mg tab , tenofovir 300 mg plus lamivudine 300 mg plus efavirenz 600 mg combination pill //bid details 2 / 37

Central Government And Public Sector

CTN :45361764 Due date: 08 Jun, 202608 Jun, 2026 NA
Tender For providing of e-learning content development - igot; restructure & rewrite content, storyboarding with production support; hindi, english; mobile and laptop/desktop both; water; levels; level 2; na; na; testing and lms upload support

State Government

CTN :45341930 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee

State Government

CTN :45325008 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x
 Loading, Please wait...

Connect us via What's Up