Latest iron saw Tenders | Government iron saw Tenders

State Government

CTN :43463670

21 Jan, 2026 NA

Thrissur - Kerala

Tender For supply of agricultural machineries for central prison and correctional home, viyyur, thrissur - supply of agricultural machineries with following specifications:, supply of tractorand accessories with following specifications:a) supply of tractor with following specifications 4 stroke, direct injection diesel engine, dual clutch, oil immersed disc brake, single pto, independent pto lever, dry type air filter, constant mesh / synchromesh transmission, planetary drive, 4wheel drive, pto power above 38hp, automatic depth and draft control, dry weight below 2 ton, wheel base above 1950mm, ground clearance more than 350mm, water proof front housing, in-built power-steering. front bumper, test report from designated institution.accessories: toolkit, srew jack, rops with canopy, seat with seat belt, ballast weight, drawbar, universal joint, 3 point link with nut and bolt. b) cutivator5 tyne rigid type duck foot cultivator suitable for the above tractor, test report from designated institution c) rotavatorcentrally aligned multi-speed rotavator with gear type transmission suitable for the above tractor1. width of cut not less than 1750 mm2. number of blades 423. working depth upto 200 mm4. weight less than 500 kgtest report from designated institutiond) tractor operated shreddertractor pto operated shredder having production capacity not below 1500 kg/hr with universal joint suitable for the above tractor, input size dimension 1450 x 1760 x 1050mm (l*w*b). test report from designated institutione) hydraulic tipping trailer 5tone suitable for above tractorsuitable for above tractor, body size 10ft x 6ft x1.5ft, platform with minimum thickness of 5mm ms sheet, side door with minimum thickness of 2.5mm ms sheet, with minimum jack capacity of 5 ton and tyre size 9.00 x16. (minimum) 4 mm, t jacky of 5t capacity to be supplied with 360 degree turning clamp. , garden tiller 5.5 hp with attachments blue spirel, ridger rotavator with specification below4 stroke, air cooled, single cylinder, hp not less than 5hp, petrol engine working width 35-55-85cm, depth not below 7.5cm, overall weight not more than 60kg, test report from designated institution, brush cutter4 stroke, cutter dia. not less than 300mm, overall weight less than 8kg, hp not less than 1.5 hp, cutter dia not less 300mm,fuel tank capacity not less than 600 ml. cost including gst, transportation up to site and demo. test certificate from designated institution, coconut climberhemperi model with ss 3 rod, weight less than or equal to 12 kg., aluminum ladder aluminum straight ladder (20ft) with flat step, load bearing capacity 150kg, supporting channel thickness 4mm or above, riser height 10 to 13 inch, step channel width 2inch or above, test report from designated institution, aluminum pole ladder aluminum pole ladder height 30ft or nearest with weight below 15kg and cylindrical aluminium pipe with thickness not below 1,3mm with circlip type. nylon steps and soil gripper, gap between step not above 30cc, test certificate from any govt institution., battery operated sprayerbattery operated sprayer 12 amp/12 v battery and with suitable lance, tank capacity 15 lr to 20 lr, weight not more than 7kg, auto cutoff, test report from designated institution, chain sawchain saw petrol engine 2 stroke with engine cc 75 to 90, weight power 5.5hp, overall weight below 8 kg, carbide tipped blade, guide bar length 18 inch,test report from designated institution, petrol operated water pumppetrol fuel, 3hp or nearest at 3600rpm, 4 stroke, forced air cooled, pump type centrifugal self priming pump, inlet dia 80mm, outlet 80mm, discharge not less than 1100 lpm, total head 23m, dry weight not more than 28kg,test report from designated institution, telescopic pole pruner manualtelescopic extendable pole pruner (manual) with 6.5m aluminum pipe, 16" curved tooth s.s. pruner blade, weight not more than 3kg., chaff cuttersingle phase a/c induction motor 5 hp or nearest, 3 star rating or above, cutting capacit

State Government

CTN :43522217

24 Jan, 2026 NA

Rajpipla - Gujarat

Tender For supply of portable drill machine (q3) , chain saw (q3)

Corporations And Associations And Others

CTN :43499288

15 Jan, 2026 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43499290

15 Jan, 2026 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

CTN :43529840

20 Jan, 2026 NA

Pune - Maharashtra

Tender For tender for supply of hedge trimer , bush cutter , bush cutter timer wire bundle , hedge trimer blade , chain saw

CTN :43421263

17 Jan, 2026 1.20 Lacs

Kutch - Gujarat

Tender For corrigendum : providing of custom bid for services - repairing of as equipment brush cutter hedge cutter backpack leaf blower power chain saw pg set tree pruner

CTN :43499326

19 Jan, 2026 64.29 Lacs

Jaipur - Rajasthan

Tender For work of installing sports equipment in various parks of jagatpura and malviya nagar zone. (arc) - double arch swing: in this two children can enjoy the swing at one time.the arch shaped side frame is made of 65mm nb b class gi pipe and top pipe is made up of 50mm nb b class g.i. pipe.the frame is powder coated to give an aesthetic look.the swing is made up of 5mm thick anti skid canvas top. the rubber belt seat is suspended on 6mm rubber coated gi chain. the ball bearings shall be mounted inside a specially designed nylon clamp., deluxeslide:deluxe slide chute is made from stainless steel (ss) of 304 grade swith 16 swg sheet.the structure comprises of 20 mm nb and 25 mm nb b class g.i. pipe. the centre support is made in 80 mm nb b class g.i. pipe and 15 mm nb g.i. pipe.the ladder cum railing is made up of 20 mm nb and 25 mm nb b class gi pipe. the platform is made up of 14 swga luminium sheet swith an tiskid for firm foot grip.there are train gular steps of 16 swg sheets. the chute has its end such as it causes safe landing of the child.the pipe sare powder coated to avoid rusting., frp wave slide :providing and fixing of frp wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5 ground level and should be made by 32 mm nb and 25 nb and 20 mm nb pipe ms pipe.slide length10 all components paint by pu paint in multi colours., doubleseesaw: providing and fixing of double see saw of height 0.5 mtr from ground level.seat frame and base should be made with 50 mm nb b class g.i. pipe. handle pipe should be 25 mm nb b class g.i.pipe.length of see saw lever should be 6 feet. seats are made with frp/lldpe. max. 4 children can play at one time., spiral slide : the chute of the spiral slide is made of frp (fibre reinforced plastic) having thickness of 4mm. slide centre support shall be 80mm nb b class gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform is made from frp(fibre reinforced plastic). the laddermain frame is 25 mm gi pipe.the railing shall be made from15 mm nb and 20 mm nb b class gi pipe. all pipes are powder coated to avoid rusting.

CTN :43497866

19 Jan, 2026 95.93 Lacs

Jaipur - Rajasthan

Tender For work of installing sports equipment in various parks of murlipura, vidyadhar nagar and jhotwara zone. (arc) - double arch swing: in this two children can enjoy the swing at one time.the arch shaped side frame is made of 65mm nb b class gi pipe and top pipe is made up of 50mm nb b class g.i. pipe.the frame is powder coated to give an aesthetic look.the swing is made up of 5mm thick anti skid canvas top. the rubber belt seat is suspended on 6mm rubber coated gi chain. the ball bearings shall be mounted inside a specially designed nylon clamp., deluxeslide:deluxe slide chute is made from stainless steel (ss) of 304 grade swith 16 swg sheet.the structure comprises of 20 mm nb and 25 mm nb b class g.i. pipe. the centre support is made in 80 mm nb b class g.i. pipe and 15 mm nb g.i. pipe.the ladder cum railing is made up of 20 mm nb and 25 mm nb b class gi pipe. the platform is made up of 14 swga luminium sheet swith an tiskid for firm foot grip.there are train gular steps of 16 swg sheets. the chute has its end such as it causes safe landing of the child.the pipe sare powder coated to avoid rusting., frp wave slide :providing and fixing of frp wave slide its required area 4.6 mtr x 0.9 mtr platform height should be 5 ground level and should be made by 32 mm nb and 25 nb and 20 mm nb pipe ms pipe.slide length10 all components paint by pu paint in multi colours., doubleseesaw: providing and fixing of double see saw of height 0.5 mtr from ground level.seat frame and base should be made with 50 mm nb b class g.i. pipe. handle pipe should be 25 mm nb b class g.i.pipe.length of see saw lever should be 6 feet. seats are made with frp/lldpe. max. 4 children can play at one time., spiral slide : the chute of the spiral slide is made of frp (fibre reinforced plastic) having thickness of 4mm. slide centre support shall be 80mm nb b class gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform is made from frp(fibre reinforced plastic). the laddermain frame is 25 mm gi pipe.the railing shall be made from15 mm nb and 20 mm nb b class gi pipe. all pipes are powder coated to avoid rusting.

CTN :43409118

19 Jan, 2026 20.00 Lacs

Yamunanagar - Haryana

Tender For corrigendum : supply tata / similar make gi wire as per specification mentioned for manufacturing of chain link fence at hfdc chain-link fencing unit (saw mill) jagadhri

CTN :43532011

12 Jan, 2026 NA

Adra - West Bengal

Tender For supply of chain saw (portable) brand- stihl designed to cut through different building materials like timber,metal sheets,frp,pvc etc(not through concrete) 2 stroke petrol driven, air cooled, electronic type output power - 6 hp displacement 75 cc weight (approx.)- 6 kg cutting chain detail: carbide tipped chain with 3/8 [ warranty period: 30 months after the date of delivery ]

Iron Saw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations And Associations And Others

Corporations And Associations And Others