Get complete information related to latest Isolator Clamp Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Isolator Clamp Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Isolator Clamp Tenders.
Tender For supply of existing old eot crane by providing new eot crane parts - removal of existing eot crane complete , motor for lifting , drive motor , runway 3 phase 415 , copper cable , master controller , limit switch , control pane , compatible to eot , hook block , steel rope , trolley for steel , effectors for grabbing , longitudina
Tender For corrigendum : work of purchasing material for electrification work under deposit plan. - stone pad, holding clamp for top channel & fuse set etc, t- off clamp with nuts & bolts, eye bolt for service cable, danger plate with clamp, barbed wire, aluminium binding wire (5mm dia), nut nolts of various size, dead end clamp for pole/bracket with nuts & bolts, suspension clamp with nut & bolt, clamp for d.b (40x6mm), clamp for t/f, i hook, prircing connector, lt clamp with nut & bolt, lt shackel insulator, nuts bolt for shackel insulator
Tender For purchase of spares - liner bearing(ispl sl no-488) , grommet(plate-b1-6-1 20) , shim 0.5mm(ms-146) (plate no-g1-3-1 , sl no-20) , grommet(plate no-c1-2-1 , sl no-14) , shim 1.5mm(ms-147)( plate no-g1-3-1 , sl no-21) , o ring , grease nipple 1 by 8 inch bsp , str (os-678)) , spacer block(plate -b2-18-1) , o ring(plate no-e3-7-1 , sl no-4) , cap , seal(b4-1-1 by 05) , o ring seal (ispl1207 & ctlg-e3-7-1 , sl-05) , washer 3 by 4 inch bsp(os-1053) , pin hose retainer(plate-b1-17-1) , bulb(plate-viii h-10) , hose clamp , screw cap (item no-1750) , bush hinge , snap ring , 20 amp fuse(plate- ix e-7) , grommet (plate-d2-1-4) , stop (plate no- b2-1-4 , sl no-29) , 15 amp fuse(plate-ix e-8) , spacer , d e spnr (12mm x 13mm) , o ring 274 idx3.5 cross sec dia , bulb(plate-viii h-11) , seal fit tool(price list sl-25412) , spacer , socket (1 by 2 inch a oblique f x 1 by 2 inch drive) , rivet nut m10 , knob excavator c w switch as supplied(d1-8-35) , seal ring turquoise , door stay , wheel nut , thrust washer(ms sl no-426) , worm drive clip 70mm longclip jubilee , protector (ispl plate b2-6-9) , stop cable(plate d3-1-5) , pad wear 6mm upper colour red , extension bar (1 by 2 inch sq drive) , sensor , water temp , liner bearing , bolt gr5 , 3 by 8 inch unf x 3 by 4 inch long , temp sensor unit(isplsl-620) , gaiter excavator lever , switch oil pressure engine(c1-16-1) , mounting rubber , mounting rubber(n1-8-1) , bearing(plate-d1-1-2) , lower door glass(ms sl-46) , pad wear 7mm upper colour blue , hose bend , gasket , plug , socket (17mm) , clevis pin , ring seal , bowl , hammer engineers ball pane 200 grm with handle , switch water temp , pipe assy( plate no-a1-7-2 , sl no- 23) , buzzer(plate-c3-2-3) , pin hinge cab door (item no-306) , switch oil temperature , adopter 5 by 8 inch bsp x 5 by 8 inch bsp , socket 1.1 by 8 inch a oblique f(b5-2-1) , tooth , cover pre cleaner (plate-xxvi b) , pree paper filter , adaptor m oblique n 1 by 2 inch x 5 by 8 inch bsp , tooth (plate-a2-1-1) , collar , bearing linner , glass front quarter light left hand clear , clamp plate , glass front quarter light right hand clear(plate-b , flasher hazzered , bearing , hammer (10lb)(ispl sl-553) , v belt (cogged) 1450mm long (497tc p-110) , hose (e1-10-2) , tube , ferrule for push rods , catch side window lockback (jcb 3dx super page-89) , side cutter double flange , nut lock(ms sl-540) , tail lamp rh oblique light rear combination rh , bucket dipper pivot pin(plate-vi s-1) , adaptor air filling (3dx b5-2-4(tool kit)) , side cutter double flange , element air safety(p3-3-2) , air filter inner , cable throtal inner , outer(d2-1-4) , fan belt (jcb super list of carried spares) , glass six light l h side , side window glass(ms sl-55) , glass six light right side , gasket turbo outlet (plate- xxva) , hose(e1-9-2) , glass six light rear , hose(e1-9-2) , element air main(plate-p3-3-2) , glass six light right rear side , support bracket(price list 2015) , piston bearing(e4-1-5) , hose for wat outlet m feld , piston bearing , hose(e1-1-1) , piston bearing (ms sl-328) , shim kit(ispl sl-1556) , ball bearing , l h cab door upper window glazing(sl-298) , s e spner 60mm , piston bearing , hose(plate-a1-7-2) , wind screen(plate-b2-3-5) , seal , hose , seal kit for dipper ram , swivel hook , adaptor(plate-xxxi aa-29) , bush(plate-f1-6-1) , t handle 1 inch sq drive(be220g fig no-8000) , combination switch (plate c3-2-3 p-90) , seal kit bomm ram , master cyl(ispl sl-1663) , adaptor(plate-xxxi aa-25) , water pump abi(price list sl-9615) , joint knuckle swivel (3dx f1-6-10) , bearing extractor (price list sl-25409) , propshaft rear (ctlg 3dx f3-2-1) , impulse extractor for hub bearing seal(smt sl-06) , bush (ms sl no 11) , set of seal , ram as suppli crowd (plate xvi m) , turbocharger(ispl 4r1040t sl-1 p-78) , bucket cylinder b h , backhoe bucket 0.30 cum (plate xxxi d) , boom assy , hyd pump (ispl plate f08) , repair kit (e jcb e2-2-1) , extended dipper valve (plate xxxi o) , st
Tender For corrigendum : providing and installing various electrical accessories to various government primary schools in pernem taluka. (ii call) - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(c) group c -- with cat a modular accessories, wiring for 5a /15a plug with 2 x 4 sq.mm fr pvc insulated copper conductor single core cable in pvc casing capping alongwith 1 no 4 sq.mm fr pvc insulated copper conductor single core cable for loop earthing as required., supplying and fixing suitable size modular pvc box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 a modular socket outlet and 5/ 6 a modular switch connection painting etc. as required., supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required;(a) cat a, installationearthing testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm frfrls pvc insulated copper conductor single core cable etc. as required., supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories.;(a) cat a, supply and erecting s type stainless steel fan hook fabricated out of 10 mm round bar complete as required., supplying and fixing extra down rod of 20 cm length gi pipe 15 cm dia heavy gauge including painting etc as required, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(a) sp cat a, earthing with gi earth pipe 2 mts long 40 mm dia medium class with isi markof approved brands including accessories and providing masonry enclosure with ci/rcc cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the earthing drawing provided by the engineer-incharge.the scope of work includes the following: a) excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) class b gi pipe 40mm diameter as per specifications. c) charcoal/salt as per specs ( paid seperately). d) refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)masonary chamber with proper foundation cover plate and locking arrangement. f) testing of earth value with earth megger and certifications of its value. aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).;(a) in soily strata, extra for using salt and charcoal for pipe earth electrode as required( 65 kgs of charcoal and 5 kgs of salt)., providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required, supply of 3 core unarmoured pvc/xlpe insulated pvc sheathed copper conductor cable of 1.1 kv grade with isi mark conforming to is:1554(part i) is:7098(part i) with latest amendments of following size.;3 core 2.5 sq.mm, supply and fixing of led batten 4 feet 20 watt with led tube as required of make panasonic or equivalent in crompton bajaj havells as approved by engineer incharge. the led tube should have a warranty of two years from the date of commissioning.
Tender For corrigendum : providing and installing various electrical accessories to various government primary schools in bicholim taluka. (ii call) - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(c) group c -- with cat a modular accessories, wiring for 5a /15a plug with 2 x 4 sq.mm fr pvc insulated copper conductor single core cable in pvc casing capping alongwith 1 no 4 sq.mm fr pvc insulated copper conductor single core cable for loop earthing as required., supplying and fixing suitable size modular pvc box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 a modular socket outlet and 5/ 6 a modular switch connection painting etc. as required., supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required;(a) cat a, installationearthing testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm frfrls pvc insulated copper conductor single core cable etc. as required., supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories.;(a) cat a, supply and erecting s type stainless steel fan hook fabricated out of 10 mm round bar complete as required., supplying and fixing extra down rod of 20 cm length gi pipe 15 cm dia heavy gauge including painting etc as required, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(a) sp cat a, earthing with gi earth pipe 2 mts long 40 mm dia medium class with isi markof approved brands including accessories and providing masonry enclosure with ci/rcc cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the earthing drawing provided by the engineer-incharge.the scope of work includes the following: a) excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) class b gi pipe 40mm diameter as per specifications. c) charcoal/salt as per specs ( paid seperately). d) refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)masonary chamber with proper foundation cover plate and locking arrangement. f) testing of earth value with earth megger and certifications of its value. aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).;(a) in soily strata, extra for using salt and charcoal for pipe earth electrode as required( 65 kgs of charcoal and 5 kgs of salt)., providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required, supply of 3 core unarmoured pvc/xlpe insulated pvc sheathed copper conductor cable of 1.1 kv grade with isi mark conforming to is:1554(part i) is:7098(part i) with latest amendments of following size.;3 core 2.5 sq.mm, supply and fixing of led batten 4 feet 20 watt with led tube as required of make panasonic or equivalent in crompton bajaj havells as approved by engineer incharge. the led tube should have a warranty of two years from the date of commissioning.
Tender For supply of coarse sand,stone aggregate 20 mm,stone aggregate 40 to 60 mm,10 mm tmt bar,rr masionary stone,connected stores as per final design,manufacturing and supply of structural items of fol shed of size 4200 x 3200 x 3000 mm using mild steel structure,side walls stores using 0.60mm of ppgl sheets,roofing sheets as per ts,ms doors as per ts,self screw for fixing of roof size as reqd on site.,star screw full thread 25 mm isi mark,nuts and bolts 8mm dia 60mm to 120mm long with washer,gi j hook 8mm with 1 nut 2 bitumin washer and limped washer,rivit of 500 nos,led tube light complete set 18w 4 feet long,switch piano flush type,pvc switch board 6 inch x4 inch,pvc casing and capping of size 25 mm,wire single core copper conductor 2.5 sqmm,mcb 10 amp sp,armoured cable10 sqmm 4 core copper,lt panel board factory fabricated,shelves for storage 2100 mm x 450 mm x 750mm,insulation tape 45 mtr with isi mark,change over switch 100 amp 04 pole,ceiling rose.,service wire 10 sq mm flat 2 core aluminium connector cable,gi wire 14sw
Tender For tender for supply of ae cable way - electric motor and all other speicification as per rfp , electric control panel board and all other speicification as per rfp , dg set and all other speicification as per rfp , assy driving unit gear box and all other speicification as per rfp , steel wire rope and all other speicification as per rfp , steel wire rope and all other speicification as per rfp , hook pully and all other speicification as per rfp , turn buckle and all other speicification as per rfp , thimble and all other speicification as per rfp , pre fabricated moified anchorage and all other speicification as per rfp , wire rope grip and all other speicification as per rfp , wire rope grip and all other speicification as per rfp , pre fabricated moified main tower and all other speicification as per rfp , foundation frame and all other speicification as per rfp , rope trolly and all other speicification as per rfp , roller machine and all other speicification as per rfp , plier and all other speicification as per rfp , adjustable and all other speicification as per rfp , spanner and all other speicification as per rfp , tester and all other speicification as per rfp , hammer and all other speicification as per rfp , insulated copper cable and all other speicification as per rfp , insulated copper cable and all other speicification as per rfp , insulating tape and all other speicification as per rfp , 40 mm gi pipe and all other speicification as per rfp , complete earthing set and all other speicification as per rfp , cement and all other speicification as per rfp , coarse sand and all other speicification as per rfp , coarse aggregate and all other speicification as per rfp , coarse aggregate and all other speicification as per rfp , mild steel bars and all other speicification as per rfp , mild steel bars and all other speicification as per rfp , mild steel bars and all other speicification as per rfp , gi binding wire and all other speicification as per rfp , plywood and all other speicification as per rfp , nails and all other speicification as per rfp